Uploaded July 2020 | Updated November 2026, 22 hours ago
Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
Building a bartop arcade machine powered by Raspberry Pi 4 for my good neighbour Terry.
Part 1:
Day One: Marking and cutting the side panels.
Day Two: Cutting all the other panels and marking the side panels ready for battens.
Part 1:
Day One: Marking and cutting the side panels.
youtube.com/watch?v=cwrBy8xJZRY
Day Two: Cutting all the other panels and marking the side panels ready for battens.
Part 1.5:
Looking at all the bits to go inside.
youtube.com/watch?reload=9&v=ybiAcBReM-A
Part 2:
Battening the side panels.
youtube.com/watch?v=IqAS5Dg--cM
Part 3:
Cutting slots and drilling holes.
youtube.com/watch?v=QElwkMBfuDs
Part 4:
More holes and ASSEMBLY!
youtu.be/RVkIGiFJLb8
Part 5: It's SHINY!
youtu.be/dIw9HLqtVwg
Part 6: It's All Grown Up!
youtu.be/KzTFdyRKDu8
Website:
morefunmakingit.co.uk
My Twitterings can be found here
twitter.com/ZZleeZZ
Ko-fi page
ko-fi.com/morefunmakingit
#bartop-arcade
Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
Building a bartop arcade machine powered by Raspberry Pi 4 for my good neighbour Terry.
Part 1:
Day One: Marking and cutting the side panels.
Day Two: Cutting all the other panels and marking the side panels ready for battens.
Part 1:
Day One: Marking and cutting the side panels.
youtube.com/watch?v=cwrBy8xJZRY
Day Two: Cutting all the other panels and marking the side panels ready for battens.
Part 1.5:
Looking at all the bits to go inside.
youtube.com/watch?reload=9&v=ybiAcBReM-A
Part 2:
Battening the side panels.
youtube.com/watch?v=IqAS5Dg--cM
Part 3:
Cutting slots and drilling holes.
youtube.com/watch?v=QElwkMBfuDs
Part 4:
More holes and ASSEMBLY!
youtu.be/RVkIGiFJLb8
Part 5: It's SHINY!
youtu.be/dIw9HLqtVwg
Part 6: It's All Grown Up!
youtu.be/KzTFdyRKDu8
Website:
morefunmakingit.co.uk
My Twitterings can be found here
twitter.com/ZZleeZZ
Ko-fi page
ko-fi.com/morefunmakingit
#bartop-arcade










