Uploaded May 2026 | Updated September 2026, 1 week ago

---

🔗 *The full guide* : _https://core-electronics.com.au/guides/3d-printing/how-to-set-up-the-bambu-lab-a1-assembly-calibration-and-first-print/_

In this video, we are going to be setting up your *Bambu Lab A1* so you can get printing quickly! We will be looking at how to *assemble* the machine, how to set up the *spool holder / AMS system,* and how to get your *first prints* going.

🔧🔨🧰 Hardware featured in this guide:

*Bambu A1 (machine only):*
_https://core-electronics.com.au/catalog/product/view/sku/BL-A1_
*Bambu Lab:*
_https://core-electronics.com.au/3d-printers-australia/professional-machines.html#category_7293_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_

0:00 Intro
0:44 Assembling the Machine
3:35 Spool Holder / AMS Set Up
5:25 Calibration and First Prints

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo