James Bruton | Balancing Strandbeest @jamesbruton | Uploaded 4 years ago | Updated 10 hours ago
I wanted to experiment more with dynamic walking robots, so I decided to see if I could make a walking robot that works just like a balancing two-wheel robot. I'm using a Strandbeest mechanism to make it walk, but with only one row of legs instead of two.
This time I'm adding the electronics which consist of an ODrive Robotice brushless motor driver, a Teensy 3.2, and an MPU6050 Inertial Measure Unit which can measure the angle that the robot it tipping to. I found it quite challenging to tune the robot to balance and it only walks in one direction.
CAD and Code at: github.com/XRobots/BalancingStrandbeest
You can support me on Patreon or buy my Merchandise:
***************************
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
Matterhackers 3D printing supplies: http://www.matterhackers.com?aff=7500
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
Amazon US: amazon.com/?tag=xrobotsuk-20
Amazon UK: amazon.co.uk/?tag=xrobotsuk-21
Amazon FR France: https://www.amazon.fr/?tag=xrobotsuk0c-21
Amazon DE Germany: https://www.amazon.de/?tag=xrobotsuk02-21
Amazon ES Spain: amazon.es/?tag=xrobotsuk07-21
Amazon IT Italy: https://www.amazon.it/?tag=xrobotsuk08-21
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Why not join my community, who are mostly made up of actual geniuses. There’s a Facebook group and everything: facebook.com/groups/287089964833488
XROBOTS
Former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer, I’m a fan of doing it yourself and innovation by trial and error. My channel is where I share some of my useful and not-so-useful inventions, designs and maker advice. Iron Man is my go-to cosplay, and 3D printing can solve most issues - broken bolts, missing parts, world hunger, you name it.
XRobots is the community around my content where you can get in touch, share tips and advice, and more build FAQs, schematics and designs are also available.
I wanted to experiment more with dynamic walking robots, so I decided to see if I could make a walking robot that works just like a balancing two-wheel robot. I'm using a Strandbeest mechanism to make it walk, but with only one row of legs instead of two.
This time I'm adding the electronics which consist of an ODrive Robotice brushless motor driver, a Teensy 3.2, and an MPU6050 Inertial Measure Unit which can measure the angle that the robot it tipping to. I found it quite challenging to tune the robot to balance and it only walks in one direction.
CAD and Code at: github.com/XRobots/BalancingStrandbeest
You can support me on Patreon or buy my Merchandise:
***************************
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
Matterhackers 3D printing supplies: http://www.matterhackers.com?aff=7500
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
Amazon US: amazon.com/?tag=xrobotsuk-20
Amazon UK: amazon.co.uk/?tag=xrobotsuk-21
Amazon FR France: https://www.amazon.fr/?tag=xrobotsuk0c-21
Amazon DE Germany: https://www.amazon.de/?tag=xrobotsuk02-21
Amazon ES Spain: amazon.es/?tag=xrobotsuk07-21
Amazon IT Italy: https://www.amazon.it/?tag=xrobotsuk08-21
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Why not join my community, who are mostly made up of actual geniuses. There’s a Facebook group and everything: facebook.com/groups/287089964833488
XROBOTS
Former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer, I’m a fan of doing it yourself and innovation by trial and error. My channel is where I share some of my useful and not-so-useful inventions, designs and maker advice. Iron Man is my go-to cosplay, and 3D printing can solve most issues - broken bolts, missing parts, world hunger, you name it.
XRobots is the community around my content where you can get in touch, share tips and advice, and more build FAQs, schematics and designs are also available.
