Uploaded November 2011 | Updated November 2026, 5 days ago
Learn how to program a BACNet/IP Controller using CoDeSys (WAGO 750-830), which can also be a Modbus TCP Master.
Simple one variable example:
1. Create PLC program with BACNet library
2. Configure the BACNet XML file
3. Test the client connection
All in under 5 minutes!
If you need to communicate with existing Modbus Slave devices, see this video: youtu.be/l4xkaKFTZB0
For more information on the Open Source SCADA System used to test the BACNet PLC, visit: mango.serotoninsoftware.com
Learn how to program a BACNet/IP Controller using CoDeSys (WAGO 750-830), which can also be a Modbus TCP Master.
Simple one variable example:
1. Create PLC program with BACNet library
2. Configure the BACNet XML file
3. Test the client connection
All in under 5 minutes!
If you need to communicate with existing Modbus Slave devices, see this video: youtu.be/l4xkaKFTZB0
For more information on the Open Source SCADA System used to test the BACNet PLC, visit: mango.serotoninsoftware.com
