B-17 TURRET SUPPORT BRACKETS @windyhillfoundry5940
B-17 TURRET SUPPORT BRACKETS  @windyhillfoundry5940
Uploaded June 2026 | Updated November 2026, 4 days ago
The following is a description of these support brackets by Mr.Gerad Allen Blume of the
Hangar Thirteen Foundation

"The parts that Clarke is casting are the support brackets for the ball turret's azimuth ring.

This ring was bolted to the floor of the aircraft. When the gunner turned his control, a lever would move the baffle inside the azimuth transmission. The degree to which he turned his control determined the speed at which the transmission pump would turn the azimuth drive. The azimuth drive inside the ball was connected to another azimuth gear on the outside trunnion. This trunnion-mounted gear interlocked with the azimuth ring bolted to floor. So, when the gear moved, it pushed/pulled on the floor ring to rotate the turret.

Most surviving ball turrets today are from Consolidated B-24s. The reason for this is, in May 1944, the US 8AF started removing balls from its Liberators to save weight. This was already a common practice in the Pacific. As such, many of these turrets were in storage when the bombers went to the scrapyards.

Our azimuth ring is from a B-24. Not only were the ring mounts too brittle for safe operation, but there were not enough of them: the B-24's azimuth ring had 14 mounts, the B-17's had 20.

So, this work by Clarke and Bob is critical to the restoration of the A-2 Ball Turret for "Lucky Thirteen."

And our supporters are the ones who made it happen. These guys would not be able to do this work, if it were not for you.

We are dedicating the month of June to fundraising for "Lucky Thirteen." Granted, you can support us anytime, but sometimes a little revival helps.

At the outset of this campaign, Bobby Poston made a challenge to match up to 1,000 USD in donations. Thus far, we have raised 225 USD.

If you enjoy our little historical write-ups, and/or want to see us bring forth a B-17F of historical fidelity never-before-seen, please consider contributing. It is easy to stand back and not get involved, even when it is something you care about. But if everyone only watched from afar, projects like ours would wither and die. Please do not be afraid to show your support - it means more than you know!

The Hangar Thirteen Foundation is a 501c3 nonprofit charity dedicated to bringing back a B-17F representative of the bloody counter-air campaign of June 1943 through March 1944. Donations to this project are tax deductible. If you can spare a little to help this project, you can guarantee that you will see the results here on Facebook and on our website: HangarThirteen.org

You can contribute through our website's Donate page or, to avoid a PayPal fee, you can send something via the mail to:

Gerad Allen Blume
Hangar Thirteen Foundation
442 Old Chalk Bed Road
Batesburg, SC 29006

Volunteers are also always welcome. In fact, you need not be an Asheville resident – you can work from home! Persons skilled with metal fabrication, machining, CAD modeling, metal casting, 3D scanning, and laser/waterjet cutting, are particularly helpful. Just reach out to us to get started.

Keep the show on the road!"

patreon.com/windyhillfoundry?utm_campaign=creatorshare_creator
B-17 TURRET SUPPORT BRACKETSSAYBROOK POINT RESORT AND MARINAWE HAVE A WINNER!HELP HAS ARRIVEDCLOUGH42 TOOL RISERVINTAGEMACHINERY.ORG REPAIRS THE SAND MULLERFOUNDRY FRUSTRATION PART 1CASTING A PART FOR CLOUGH42UP AND RUNNINGTALLY HO CAPSTAN PART3MOLDING THE CLOUGH42 CASTINGSLATHE TAIL STOCK
Windy Hill Foundry |

B-17 TURRET SUPPORT BRACKETS

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER