Uploaded January 2018 | Updated November 2026, 1 day ago
In order to complete low% without Light Arrows, we're going to need some alternative for melting Goht. Since we can action swap with deku stick + any shooting item, deku bubbles look like a good alternative. In order to do the standard method (youtube.com/watch?v=df0jXHw8uAg), however, we would need to have deku nuts on some other form's B button. Under normal circumstances (access to lots of items), this is incredibly easy to achieve; there's a large number of ways to do this. Without a quiver or bomb bag, however, we don't have access to most forms of temporary B items. Also, without nuts in inventory, we can't use the 0th day + deku flower trick to put nuts onto another form. This means we need something slightly more creative.
There is a temporary B item that we have reliable access to, and that's bow from Cremia's minigame. Using that to transfer items is tricky, though, because we can't change forms during that minigame (can't pause for mask storage). There's text blocking off the start of the game, as well, so we can't save with bow on B and moon crash (as in youtube.com/watch?v=F2huyowUXRk). This pretty much leaves the option of putting the desired item on stored B then taking the cart ride as Zora with blank B. There's a few things hindering that, which we need to solve first.
'Stored B,' an address that temporarily holds your B item while you have bow, bombs or bombchus on B, also controls B button usability. This means that whenever the B button becomes dim or undim, stored B is updated. We don't want that to happen -- we want to put deku nuts there and have them stay there. As I mentioned earlier, in order to be able to get them onto Zora's B button, we need to take the Cremia ride while Zora's B is blank. Luckily for us, when a transformation's B button is blank, it's generally not dim. Unfortunately for us, upon loading an area or transforming to a form with a blank B button, B *will* dim for 1 frame. That's enough to get rid of the stored B value that we've set up.
So it would seem that we can't even transform into Zora without messing everything up. Luckily, there's a way around that. By taking out a stick and then turning Zora one frame later while wearing a mask that gives us a B action (as one would to take advantage of that mask's weird B value youtube.com/watch?v=9wy2Idf6VCg), the game marks the B button as usable for that critical frame, so the stored B value can persist after turning Zora. (I don't believe this was previously known.)
We're able to turn Zora, then, but we still can't move through a loading zone as Zora while our B button is blank. This means that we'll need to set everything up as human (the Cremia ride) and turn Zora at the Gorman track. The last hurdle to get over is that if you do the first Cremia cutscene skip at the ranch, you're apparently stuck behind the boulder. You can see how I got around this in the video (or read below if you're a spoilsport).
With all that taken care of, the basic outline is this:
- Turn Deku on Epona. Even though we don't have bow, our B item (deku nuts) is written to stored B.
- Let the moon crash. This doesn't change the stored B value. It also means our file is in the state from our last save. In this case I've arranged it such that Zora already has blank (weird) B. Also, human's B would have been blanked from getting on Epona with no quiver, but the moon crash makes it such that we have a sword again. This is good because, remember, we can't let human's B become dim.
- Now we can go to the ranch, use 0th day to defeat aliens, and set up Cremia. By waiting to reactivate Cremia cs 1 until late at night, I make it such that time has rolled over into day by the time Cremia cs 2 finishes. Since I'm occupied in a cutscene during this transition, we instead get a day reset, which is just what we wanted. Cremia conveniently takes us past the boulder and drops us off at the Gorman track. Now, when night 2 comes around again, the final Cremia cs will trigger, leading into the game. Since we're past all the load zones we can turn Zora using the deku stick trick.
The end is a little anticlimactic since I don't have any deku nut ammo to show off, but the result is as desired; nuts are on Zora's B button.
Edit: the same effect can be achieved (quickly) without the moon crash in the setup (youtube.com/watch?v=ZNJ6sOqXqkg).
In order to complete low% without Light Arrows, we're going to need some alternative for melting Goht. Since we can action swap with deku stick + any shooting item, deku bubbles look like a good alternative. In order to do the standard method (youtube.com/watch?v=df0jXHw8uAg), however, we would need to have deku nuts on some other form's B button. Under normal circumstances (access to lots of items), this is incredibly easy to achieve; there's a large number of ways to do this. Without a quiver or bomb bag, however, we don't have access to most forms of temporary B items. Also, without nuts in inventory, we can't use the 0th day + deku flower trick to put nuts onto another form. This means we need something slightly more creative.
There is a temporary B item that we have reliable access to, and that's bow from Cremia's minigame. Using that to transfer items is tricky, though, because we can't change forms during that minigame (can't pause for mask storage). There's text blocking off the start of the game, as well, so we can't save with bow on B and moon crash (as in youtube.com/watch?v=F2huyowUXRk). This pretty much leaves the option of putting the desired item on stored B then taking the cart ride as Zora with blank B. There's a few things hindering that, which we need to solve first.
'Stored B,' an address that temporarily holds your B item while you have bow, bombs or bombchus on B, also controls B button usability. This means that whenever the B button becomes dim or undim, stored B is updated. We don't want that to happen -- we want to put deku nuts there and have them stay there. As I mentioned earlier, in order to be able to get them onto Zora's B button, we need to take the Cremia ride while Zora's B is blank. Luckily for us, when a transformation's B button is blank, it's generally not dim. Unfortunately for us, upon loading an area or transforming to a form with a blank B button, B *will* dim for 1 frame. That's enough to get rid of the stored B value that we've set up.
So it would seem that we can't even transform into Zora without messing everything up. Luckily, there's a way around that. By taking out a stick and then turning Zora one frame later while wearing a mask that gives us a B action (as one would to take advantage of that mask's weird B value youtube.com/watch?v=9wy2Idf6VCg), the game marks the B button as usable for that critical frame, so the stored B value can persist after turning Zora. (I don't believe this was previously known.)
We're able to turn Zora, then, but we still can't move through a loading zone as Zora while our B button is blank. This means that we'll need to set everything up as human (the Cremia ride) and turn Zora at the Gorman track. The last hurdle to get over is that if you do the first Cremia cutscene skip at the ranch, you're apparently stuck behind the boulder. You can see how I got around this in the video (or read below if you're a spoilsport).
With all that taken care of, the basic outline is this:
- Turn Deku on Epona. Even though we don't have bow, our B item (deku nuts) is written to stored B.
- Let the moon crash. This doesn't change the stored B value. It also means our file is in the state from our last save. In this case I've arranged it such that Zora already has blank (weird) B. Also, human's B would have been blanked from getting on Epona with no quiver, but the moon crash makes it such that we have a sword again. This is good because, remember, we can't let human's B become dim.
- Now we can go to the ranch, use 0th day to defeat aliens, and set up Cremia. By waiting to reactivate Cremia cs 1 until late at night, I make it such that time has rolled over into day by the time Cremia cs 2 finishes. Since I'm occupied in a cutscene during this transition, we instead get a day reset, which is just what we wanted. Cremia conveniently takes us past the boulder and drops us off at the Gorman track. Now, when night 2 comes around again, the final Cremia cs will trigger, leading into the game. Since we're past all the load zones we can turn Zora using the deku stick trick.
The end is a little anticlimactic since I don't have any deku nut ammo to show off, but the result is as desired; nuts are on Zora's B button.
Edit: the same effect can be achieved (quickly) without the moon crash in the setup (youtube.com/watch?v=ZNJ6sOqXqkg).





![[JP] Fast Temp B
We can make use of Deku Links unrestricted items during H&D 3 to get temp B on Goron (or Zora).
When I turn Goron in the video, Gorons B button is set to 0x01, the value of Heros Bow. This is a special value for the B button whenever you arent in a shooting minigame or on Epona, it gets set to a certain stored value. The byte that stores that value is the same byte that determines whether or not your B button is enabled in an area. By dying as Goron, you respawn as human, preventing Gorons B from changing back to its default. By putting on Goron mask in H&D, where the B button is disabled, Gorons B changes from 0x01 to 0xFF (blank), giving me weird B, from which I can get a bottle.
There are a number of other things we could do with this. Putting on Goron mask somewhere with the B button enabled would give 0x00 (Ocarina) on B. Mounting and then dismounting Epona sets stored B to the value of your sword (assuming thats what you have as human), so we could use that to get sword on Zora B (see https://www.youtube.com/watch?v=tToWRLvbMH4). [JP] Fast Temp B](https://i.ytimg.com/vi/GLevXEQAMPY/mqdefault.jpg)
![[TAS] Oceanside Spider House
This is my first longer TAS project. It was a good exercise and Im happy with the result, even if there are a lot of things I could have done better (movement mostly). Originally I was going to switch between bombs and bombchus, but doing everything with 20 chus instead was a lot more fun. [TAS] Oceanside Spider House](https://i.ytimg.com/vi/GWlSJzXCsuE/mqdefault.jpg)



![Building a RAM Editor in Ocarina of Time
I mentioned that this specific application may not stay exclusive to Wii U, though that currently looks unlikely. Both the Gamecube and Wii VC versions of the game map the dpad to the N64 L button in their emulators, so without external modification its not possible to use the event editor on those versions. N64 of course has a functioning dpad but its inability to write to misaligned memory addresses makes it unlikely that this functionality can be achieved on that console without ACE.
Below Ill outline the full method for doing this trick, but if youre just interested in messing around with the custom RAM editor (missing textures and all), you can simply write the following values (addresses for version 1.2) to replicate the result of the rta setup without the hassle:
Set 800F9238 to 8001EC00
Set 800E8720 to 800E8730
Set 800E8728 to 800E8732
Doing this glitch requires 4 applications of lightnode srm (some technical information about which is available here https://docs.google.com/document/d/1Xf0mTcGwxbuBBFX1TYhKuRdfdH34wW9492RN-1YmIUM/edit).
Each srm has the same heap setup, shown here https://www.youtube.com/watch?v=Udk4ckbeucY.
The first srm uses the file 1 name, 800FC550 803F0F0A
(file names can be converted from hex to characters with https://lemon32767.github.io/ootfname). The angle for dropping the rock is ACA0, and a setup is shown here https://www.youtube.com/watch?v=vZA7u2XCsoE.
Each time you do lightnode srm it breaks the actor heap, so youll need to transition areas (to deku tree) before doing anything.
After the first srm, die and quit back to title (you can save) and enter 016C0080 800F9235 as file 3. Youll know your srm was successful if Saria greets you when you start file 1 again.
Now file name 3 should be copied to the inf_table flags (at 8011BB8E specfically). Performing another lightnode srm with angle BB8A (setup https://www.youtube.com/watch?v=plY441oAe7M) should open the event editor (at the cost of textures).
Now we can do the same srm with the same angle, except beforehand well use the event editor to write 800E8718 800E8730 to 8011BB8E. In binary this looks like
inf_table[11] inf_table[12]
8 0 0 E 8 7 1 8
1000 0000 0000 1110 1000 0111 0001 1000
inf_table[13] inf_table[14]
8 0 0 E 8 7 3 0
1000 0000 0000 1110 1000 0111 0011 0000
Repeating the srm with these values should cause inf_table[0] to read 1000 0000 0001 0001 and the label of inf_table[2] to become a huge mess of English and katakana.
Now do the same thing again, except this time we write 800E8720 800E8732 to 8011BB8E. In binary,
inf_table[11] inf_table[12]
8 0 0 E 8 7 2 0
1000 0000 0000 1110 1000 0111 0010 0000
inf_table[13] inf_table[14]
8 0 0 E 8 7 3 2
1000 0000 0000 1110 1000 0111 0011 0010
If this final srm is done correctly, inf_table[1] should read 1011 1011 0111 1100 and the label for inf_table[2] should have disappeared.
At this point, scrolling down past inf_table[2] will crash the game. So dont do it. Note that while this can be taken between areas, the function that we hijack to run the event editor does not run everywhere, so it wont be available in some places.
Huge thanks to the OoT discord for finding this. As far as Im aware, the people who participated in discussing/testing are
MrCheeze
Savestate
Natalyahasdied
Blini
Yanis
Mephisto
MutantAura
Evilas
Iyce Building a RAM Editor in Ocarina of Time](https://i.ytimg.com/vi/J95D-gPBDuc/mqdefault.jpg)