Axe Stove - yodo Mod 1 - Boil Test @hiramcook
Axe Stove - yodo Mod 1 - Boil Test  @hiramcook
Uploaded October 2011 | Updated November 2026, 10 hours ago
I've always believed in the maxim that something could be made, "good, fast, or cheap, pick two".

I think the maxim can be modified and applied to DIY camp stoves.
They can be:
Light-weight
Easy-to-use
or have a fast boil time,
pick any two

I've been thinking more about the trouble I had with getting the Axe stove started. It ended up having a three and a half minute preheat time where I had to hold the pot over the stove to keep the flame from going out. Not very convenient. I then recalled a video that I had watched a long time ago that had a solution that would eliminate the inconvenient preheat. The solution probably wouldn't do away with the long preheat time but I could put the pot right on the stove without putting out the flame.

The problem was that I couldn't do the video I am about to do until I remembered which video it was I saw and who had done it so I could credit them for the idea.

After a couple of days running the videos in my head I finally remembered (getting old is a bitch). The video was "Auto preheating side burner for alcohol stove.", by yodogawanagare from April 11, 2008. This man is not much of a camera man, but he's a genius with an alcohol stove. IMHO

In the video he added a wick to what looks like a cat stove. The wick goes through a couple of the burn holes into the alcohol inside the stove rather than wrapping around the outside of the stove. That way the wick always has access to alcohol instead of running dry and then becoming useless.

So once the wick has soaked up the alcohol he lights the wick and places the pot right on the stove. No waiting for the stove to bloom. While the wick is heating the stove so it will bloom, the heat rising from the wick is also heating the pot, saving energy that would otherwise be wasted. When the wick heats the stove enough to vaporize the alcohol it then lights the jets.

Pretty darn neat if you ask me.

So today's video is my attempt to use yodogawanagare's idea on my Axe stove.

If you get a chance, check out his videos and his website. Unfortunately they are both seem to be in Japanese. But the pictures and videos are worth a "thousand words".

"Auto preheating side burner for alcohol stove"
youtube.com/watch?v=PQm_ATSsjHg

His channel homepage:
youtube.com/user/yodogawanagare

His website:
blue.ap.teacup.com/buluestar

Thank you for watching my video.
Hiram

Lab0204
Title: Axe Stove - yodo Mod 1 - Boil Test
Room temp: 70°
Humidity: 50%
Weather condition: Cloudy - Windy
Burner: Axe Stove - yodo Mod 1
Stove/Pot stand: Axe - yodo Mod 1
Pot: GSI Halulite Minimalist with can top for lid
Fuel: alcohol, denatured
Amount of fuel: 1 fluid ounce
Amount of water: 2 cup(s)
Water temp at start: 59°
Preheat time: NA
Time to boil: 10 minute(s) 40 second(s)
Time to run-out: NA
Water temp at run-out: NA
Note:
NA = Not Applicable / Not Available
Axe Stove - yodo Mod 1 - Boil Testxanadu1jws One year anniversary subscriber appreciation giveawayIMUSA Pot - Boil Test 1WetFire Stove using Gelled Fire Starter - ReloadedSwiss Ranger Volcano Stove using SternoCanteenShop GrillTop Stove Stand - cottle w/ wick burner - Boil Test #6Cottle Top Stove V1.0 flame pattern test - ReloadedSwiss Ranger Volcano Stove using the Swiss M1 - ReloadedSwiss M1 Stove - Gel Fuel - Boil Test 1 - ReloadedFondue Burner Flame Test - ReloadedWetFire Stove - Using WetFire Tinder Boil Test 1 & 2Venom Super Stove - Boil Test #4
Hiram Cook |

Axe Stove - yodo Mod 1 - Boil Test

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER