Uploaded February 2019 | Updated November 2026, 3 hours ago
This is the 3rd video in a DIY Tele build series. In this episode Polyurethane finish is sprayed on in two stages. As well as assembly of neck and application of headstock decal.
O,mdProductions 2019.
This is the 3rd video in a DIY Tele build series. In this episode Polyurethane finish is sprayed on in two stages. As well as assembly of neck and application of headstock decal.
O,mdProductions 2019.

![I Lost $650 on a Failed Build... So I Made 5 of the Most MOJO Pedals EVER!
Turned a $650 salvage nightmare into redemption. 5 hand-wired, point-to-point NOS Germanium Gain Cock pedals built from scratch with Sprague caps and vintage cloth wire. No circuit boards—just pure mojo.
🔥 ONLY 4 AVAILABLE (1 OF 5 ALREADY SOLD):
👉 Claim yours here: [INSERT REVERB OR DIRECT BUY LINK HERE]
In this video, I take you through the breakdown of a failed build that cost me $650 and how I salvaged the vintage NOS components to hand-wire 5 ultra-limited overdrive pedals from scratch.
⚡ GAIN COCK PEDAL SPECS:
• 100% Unique True Point-to-Point Hand-Wired Architecture
• Vintage NOS Germanium Transistors & Sprague Capacitors
• Switch craft Jacks and Heavy-duty cloth wire construction
• Ultra-limited 1-of-5 custom run
#guitarpedals #pointtopoint #guitareffects #germanium I Lost $650 on a Failed Build... So I Made 5 of the Most MOJO Pedals EVER!](https://i.ytimg.com/vi/JMp1VBACK1A/mqdefault.jpg)








