Uploaded August 2026 | Updated September 2026, 2 weeks ago

---

Many turning parts are modeled with sharp edges, but real-world manufacturing often requires edge breaks. Convex corners typically need chamfers, while concave corners need fillets.

In this example, I asked the Autodesk Assistant to analyze every body, identify convex and concave edges, and automatically apply the correct feature: a 0.5 mm chamfer to convex edges and a 0.8 mm fillet to concave edges.

The Assistant queried the chamfer and fillet APIs, planned the script, applied the features across the model, and produced the finished mixed chamfer/fillet result from a single prompt.

►FREE TRIAL | https://autode.sk/3Wtfi20
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW

CONNECT with Fusion on social media:

INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER | https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb