Uploaded January 2026 | Updated November 2026, 1 day ago
Learn how to model a simple 3D printed box with a print-in-place hinge in Autodesk Fusion (Fusion 360). This tutorial walks through a cone-style hinge that prints without supports, plus the key modeling steps that make print-in-place parts actually move: clean sketch constraints, smart extrudes, combine-cut workflow, and dialed-in clearances.
You’ll also build the box body using projection, rectangles, shell for consistent wall thickness, then finish the model for printing with fillets and a bottom chamfer to reduce first-layer distortion. Use this as a starter project, then iterate with different hinge lengths, lid/base variations, and parametric dimensions.
Chapters
00:00 Overview: print-in-place hinged box (no supports)
00:17 Project goal and why this is great for iteration practice
00:28 Start sketch: center circle and hinge profile setup
*0:06 Add constraints and dimensions for a support-free hinge shape
02:02 Extrude the first hinge side (example: 25 mm)
02:26 Create the cone feature with taper (example: -35 degrees)
03:17 Combine tool: cut the cone and keep tools for reuse
03:44 Add print-in-place clearance with offset faces (-0.3 and -0.2)
04:32 Sketch the box footprint using project and rectangles
05:21 Extrude the box body sections and set to new body
05:35 Shell the box open (example: 2 mm walls) on both halves
06:10 Combine bodies to reduce to two bodies total
06:39 Mirror bodies to complete the closed box layout
07:01 Inspect with section analysis to verify hinge clearance
07:14 Prep for printing: fillets and edge rounding strategy
07:25 Fillet key vertical edges (example: 6 mm) for comfort and strength
08:28 Finish remaining edges with small fillets (example: 0.8 mm)
09:07 Add bottom chamfer (example: 2 mm) to reduce bed-edge sag
09:24 Wrap-up: print, modify, and explore design variations
09:45 Next steps: textures, lid variations, and going fully parametric
010:04 Prototype complete: ready to print and iterate
Key settings mentioned in the tutorial (easy to tweak)
- Hinge extrusion length: 25 mm (design choice)
- Cone size example: 10 mm circle, extrude 5 mm
- Taper angle: -35 degrees
- Clearances: offset flat faces to -0.3, cone surface to -0.2
- Shell thickness: 2 mm
- Fillets: 6 mm (major edges), 0.8 mm (small cleanup edges)
- Bottom chamfer: 2 mm
#autodeskfusion #fusion360 #3dprinting #printinplace #cadtutorial
Learn how to model a simple 3D printed box with a print-in-place hinge in Autodesk Fusion (Fusion 360). This tutorial walks through a cone-style hinge that prints without supports, plus the key modeling steps that make print-in-place parts actually move: clean sketch constraints, smart extrudes, combine-cut workflow, and dialed-in clearances.
You’ll also build the box body using projection, rectangles, shell for consistent wall thickness, then finish the model for printing with fillets and a bottom chamfer to reduce first-layer distortion. Use this as a starter project, then iterate with different hinge lengths, lid/base variations, and parametric dimensions.
Chapters
00:00 Overview: print-in-place hinged box (no supports)
00:17 Project goal and why this is great for iteration practice
00:28 Start sketch: center circle and hinge profile setup
*0:06 Add constraints and dimensions for a support-free hinge shape
02:02 Extrude the first hinge side (example: 25 mm)
02:26 Create the cone feature with taper (example: -35 degrees)
03:17 Combine tool: cut the cone and keep tools for reuse
03:44 Add print-in-place clearance with offset faces (-0.3 and -0.2)
04:32 Sketch the box footprint using project and rectangles
05:21 Extrude the box body sections and set to new body
05:35 Shell the box open (example: 2 mm walls) on both halves
06:10 Combine bodies to reduce to two bodies total
06:39 Mirror bodies to complete the closed box layout
07:01 Inspect with section analysis to verify hinge clearance
07:14 Prep for printing: fillets and edge rounding strategy
07:25 Fillet key vertical edges (example: 6 mm) for comfort and strength
08:28 Finish remaining edges with small fillets (example: 0.8 mm)
09:07 Add bottom chamfer (example: 2 mm) to reduce bed-edge sag
09:24 Wrap-up: print, modify, and explore design variations
09:45 Next steps: textures, lid variations, and going fully parametric
010:04 Prototype complete: ready to print and iterate
Key settings mentioned in the tutorial (easy to tweak)
- Hinge extrusion length: 25 mm (design choice)
- Cone size example: 10 mm circle, extrude 5 mm
- Taper angle: -35 degrees
- Clearances: offset flat faces to -0.3, cone surface to -0.2
- Shell thickness: 2 mm
- Fillets: 6 mm (major edges), 0.8 mm (small cleanup edges)
- Bottom chamfer: 2 mm
#autodeskfusion #fusion360 #3dprinting #printinplace #cadtutorial










