PhotoJoseph | Auto Switching Camera Angles using Macros - ATEM Mini Pro, ATEM Mini Tips 01 @photojoseph | Uploaded March 2021 | Updated October 2024, 1 week ago.
Want 4+ hours of pure ATEM training?
Watch this: youtu.be/XD0qjiA-CC0
Have you ever wanted your ATEM Mini to change camera angles automatically?
It's a common question, so I created this "Auto Switching Camera Angles using Macros" video to show you how!
Blackmagic ATEM Mini Complete Tour
Watch Now: youtu.be/5W5xiaEhK9M
Need an ATEM Mini? Here's the current lineup…
ATEM Mini geni.us/ATEMmini
ATEM Mini Pro geni.us/ATEMminiPro
ATEM Mini Pro ISO geni.us/ATEMminiProISO
ATEM Mini Extreme geni.us/ATEMminiExtreme
ATEM Mini Extreme ISO geni.us/ATEMminiExtremeISO
ATEM Streaming Bridge geni.us/ATEMbridge
Subscribe to the new @PhotoJosephLIVE channel!
youtube.com/channel/UCv9vBqGf1BALPY_13jMxigg?sub_confirmation=1
Guess what; we're going to India in November 2023, and you're invited! Learn all about this amazing photography workshop adventure at photojoseph.com/india-ytdesc
Join the channel! @photojoseph
Check out member benefits at youtube.com/photojoseph/join
👇🏼 GO HERE for more ATEM info and more camera goodness! 👇🏼PhotoJoseph.com/yt/AmT001
Operating an ATEM Mini is pretty easy, but what if you want the camera angles to change for you? You easily do that using the built-in macros capability!
All you need to do is start recording a macro, switch to one input (for example, CAM 1), then insert a pause of however long you want — a few seconds, a minute, whatever! — then switch to CAM 2 (or any other), add another pause, and repeat. That's it!
When you run the macro, it'll switch, pause, switch, pause, etc. And if you want this to continuously switch, you can simply set the macro to repeat! Just don't forget to add a pause at the end of the macro so that it takes time after the final camera switch before it starts all over again.
If you want the switches to feel more random, then build multiple rounds of switching into a single macro, each with different timings between inputs, and repeat that.
For example, switch to CAM 1, pause 3 seconds… CAM 2, 5 seconds… CAM 3, 4 seconds… CAM 4, 7 seconds… CAM 1, 6 seconds… CAM 2, 3 seconds… CAM 3, 9 seconds… and so-on.
You can even change the order that the camera angles switch! Just build a random "pattern" into the sequence, and make it long enough, so no one notices that it's repeating. Pretty cool, right?
The “ATEM (mini) Tips” collection is an ongoing series of small tips for your @BlackmagicDesignOfficial ATEM hardware — no matter which model you use. Offering answers and solutions to common questions and problems, these tips are bite-sized videos to help you get the most from your investment.
Check out the Playlist:
youtube.com/playlist?list=PLRe8DcOhgslpSQkH8ycUW9xCmNg2I4b0y
⚠️ DISCLAIMER ⚠️ I am a professional content creator, a photographer, YouTuber, filmmaker, and ALSO a Panasonic LUMIX Ambassador. This means I am SPONSORED by Panasonic and therefore am naturally biased towards their gear. I regularly state this in my videos, but in case I don't say it, it's still true. Thanks for watching!
► AFFILIATE DISCLAIMER: This channel is an affiliate, partner, or associate with many participating retailers and companies, including Amazon, B&H, Adorama, and others. As an Amazon Associate, I earn from qualifying purchases, as I do from other affiliate links.
🧠 I use Genius for affiliate links — it's awesome, check it out at geni.us/sign-up
🔒 Need a VPN? Try NordVPN. I just switched to it and it's great! go.nordvpn.net/SH89Z
- PhotoJoseph
#atemmini #atemminipro #blackmagicdesign
.
.
.
Keywords:
atem mini
atem mini pro
auto switch camera angles
switch camera angles using macro
auto switch multiple camera
multi camera live streaming
blackmagic atem mini
blackmagic atem mini pro
live stream processing
blackmagic atem
how to change camera angles in your streams
production switcher tutorial
professional live stream setup
live stream video switcher
atem mini live stream
atem tips
atem tutorial
atem mini tutorial
atem mini tips
atem mini macros
Want 4+ hours of pure ATEM training?
Watch this: youtu.be/XD0qjiA-CC0
Have you ever wanted your ATEM Mini to change camera angles automatically?
It's a common question, so I created this "Auto Switching Camera Angles using Macros" video to show you how!
Blackmagic ATEM Mini Complete Tour
Watch Now: youtu.be/5W5xiaEhK9M
Need an ATEM Mini? Here's the current lineup…
ATEM Mini geni.us/ATEMmini
ATEM Mini Pro geni.us/ATEMminiPro
ATEM Mini Pro ISO geni.us/ATEMminiProISO
ATEM Mini Extreme geni.us/ATEMminiExtreme
ATEM Mini Extreme ISO geni.us/ATEMminiExtremeISO
ATEM Streaming Bridge geni.us/ATEMbridge
Subscribe to the new @PhotoJosephLIVE channel!
youtube.com/channel/UCv9vBqGf1BALPY_13jMxigg?sub_confirmation=1
Guess what; we're going to India in November 2023, and you're invited! Learn all about this amazing photography workshop adventure at photojoseph.com/india-ytdesc
Join the channel! @photojoseph
Check out member benefits at youtube.com/photojoseph/join
👇🏼 GO HERE for more ATEM info and more camera goodness! 👇🏼PhotoJoseph.com/yt/AmT001
Operating an ATEM Mini is pretty easy, but what if you want the camera angles to change for you? You easily do that using the built-in macros capability!
All you need to do is start recording a macro, switch to one input (for example, CAM 1), then insert a pause of however long you want — a few seconds, a minute, whatever! — then switch to CAM 2 (or any other), add another pause, and repeat. That's it!
When you run the macro, it'll switch, pause, switch, pause, etc. And if you want this to continuously switch, you can simply set the macro to repeat! Just don't forget to add a pause at the end of the macro so that it takes time after the final camera switch before it starts all over again.
If you want the switches to feel more random, then build multiple rounds of switching into a single macro, each with different timings between inputs, and repeat that.
For example, switch to CAM 1, pause 3 seconds… CAM 2, 5 seconds… CAM 3, 4 seconds… CAM 4, 7 seconds… CAM 1, 6 seconds… CAM 2, 3 seconds… CAM 3, 9 seconds… and so-on.
You can even change the order that the camera angles switch! Just build a random "pattern" into the sequence, and make it long enough, so no one notices that it's repeating. Pretty cool, right?
The “ATEM (mini) Tips” collection is an ongoing series of small tips for your @BlackmagicDesignOfficial ATEM hardware — no matter which model you use. Offering answers and solutions to common questions and problems, these tips are bite-sized videos to help you get the most from your investment.
Check out the Playlist:
youtube.com/playlist?list=PLRe8DcOhgslpSQkH8ycUW9xCmNg2I4b0y
⚠️ DISCLAIMER ⚠️ I am a professional content creator, a photographer, YouTuber, filmmaker, and ALSO a Panasonic LUMIX Ambassador. This means I am SPONSORED by Panasonic and therefore am naturally biased towards their gear. I regularly state this in my videos, but in case I don't say it, it's still true. Thanks for watching!
► AFFILIATE DISCLAIMER: This channel is an affiliate, partner, or associate with many participating retailers and companies, including Amazon, B&H, Adorama, and others. As an Amazon Associate, I earn from qualifying purchases, as I do from other affiliate links.
🧠 I use Genius for affiliate links — it's awesome, check it out at geni.us/sign-up
🔒 Need a VPN? Try NordVPN. I just switched to it and it's great! go.nordvpn.net/SH89Z
- PhotoJoseph
#atemmini #atemminipro #blackmagicdesign
.
.
.
Keywords:
atem mini
atem mini pro
auto switch camera angles
switch camera angles using macro
auto switch multiple camera
multi camera live streaming
blackmagic atem mini
blackmagic atem mini pro
live stream processing
blackmagic atem
how to change camera angles in your streams
production switcher tutorial
professional live stream setup
live stream video switcher
atem mini live stream
atem tips
atem tutorial
atem mini tutorial
atem mini tips
atem mini macros
