@CarlBugeja
  @CarlBugeja
Carl Bugeja | Attracting Paper to Magnets! @CarlBugeja | Uploaded December 2018 | Updated October 2024, 13 minutes ago.
​This year I have design various kind of motors that are made from PCBs. These designs have inspired me to try and create an electromagnet drawn on paper!

To draw the coil I have used conductive ink that created a much smaller resistance than if I used a normal 2B graphite pencil. I started out with 35 turns but the resistance still got to 2.4kohms, so i reduced the turns to 20 and got a 60 ohms independence.

As shown in the video I managed to get some good results for attraction and repulsion. There is still some room for improving the "electromagnetic drawing". I can try to make the coils a little thicker to reduce the resistance as much as possible. I can also use thinner paper to get more flex and also try drawing it on both sides.

Subscribe to the channel here: youtube.com/carlbugeja

Twitter: twitter.com/BugejaCarl
Instagram: instagram.com/bugeja.carl

Project Page:
hackaday.io/project/163008-magnetic-paper
hackster.io/carlbugeja/magnetic-paper-50d378

Music: soundcloud.com/artificial-music
Attracting Paper to Magnets!You used my €2 ACTUATOR for...3-in-1 Piezo MagicHow to design a PCB Motor?Making a 4-Legged Robot BallDesigning a Flexi-Rigid FlexLED (v2)Soldering 242 LEDs on a FlexPCBBuilding my NEW LAB!PCB Robot MKIII - Final Test!Magnet Clapping Actuatorcalling it microbots!Self-Aligning Magnets?

Attracting Paper to Magnets! @CarlBugeja

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER