Uploaded September 2025 | Updated November 2026, 3 days ago
Atomstack recently sent out one of the pre-production Glacer lasers to me for some feedback and previews. This is a 120W, water-cooled diode laser, which should cut down on the maintenance of the module by eliminating the dust drawn in from an air-cooled module. These are some of my first test cuts on 3/4" solid Poplar.
I'll be doing a more in-depth video on this laser soon. In the meantime, check out the Kickstarter page for more information on this laser!
kickstarter.com/projects/670305836/atomstack-worlds-first-120w-water-cooled-laser-engraver?ref=dvn64v
Become a channel member here:
youtube.com/channel/UC93sJsqzmDqkYrEHUPDQzuQ/join
#atomstack #hobbylaser #laserengraver #laserengraving #diodelaser
@atomstack.official
Atomstack recently sent out one of the pre-production Glacer lasers to me for some feedback and previews. This is a 120W, water-cooled diode laser, which should cut down on the maintenance of the module by eliminating the dust drawn in from an air-cooled module. These are some of my first test cuts on 3/4" solid Poplar.
I'll be doing a more in-depth video on this laser soon. In the meantime, check out the Kickstarter page for more information on this laser!
kickstarter.com/projects/670305836/atomstack-worlds-first-120w-water-cooled-laser-engraver?ref=dvn64v
Become a channel member here:
youtube.com/channel/UC93sJsqzmDqkYrEHUPDQzuQ/join
#atomstack #hobbylaser #laserengraver #laserengraving #diodelaser
@atomstack.official










