Uploaded June 2020 | Updated November 2026, 3 hours ago
Many people ask me how I process my astrophotography images from the raw images to the final product. As you will see, there is quite a lot of post-processing involved. I use the following:
Deep SkyStacker
PixInsight
Photoshop CC 2020
The images were taken June 21, 2020 with the 11" Celestron EdgeHD telescope using the 0.7x Reducer Lens. I used the image capture control program N.I.N.A. along with Celestron's CPWI. The camera used was the Altair Hypercam 294C ProTEC using the Altair Quadband filter. Due to the filter, I used a higher gain setting of 450 on the 300 second FITS images.
My Website: heavenlybackyardastro.com
My Facebook page: facebook.com/Heavenly-Backyard-339391973366228
My Weather and Nature website: https://www.savannahpat.name/
My Weather and Nature Facebook page: facebook.com/Pat-Prokops-Weather-and-Nature-Page-134392193239081
Many people ask me how I process my astrophotography images from the raw images to the final product. As you will see, there is quite a lot of post-processing involved. I use the following:
Deep SkyStacker
PixInsight
Photoshop CC 2020
The images were taken June 21, 2020 with the 11" Celestron EdgeHD telescope using the 0.7x Reducer Lens. I used the image capture control program N.I.N.A. along with Celestron's CPWI. The camera used was the Altair Hypercam 294C ProTEC using the Altair Quadband filter. Due to the filter, I used a higher gain setting of 450 on the 300 second FITS images.
My Website: heavenlybackyardastro.com
My Facebook page: facebook.com/Heavenly-Backyard-339391973366228
My Weather and Nature website: https://www.savannahpat.name/
My Weather and Nature Facebook page: facebook.com/Pat-Prokops-Weather-and-Nature-Page-134392193239081










