RCSchim | Artillery X3plus review + Nozzle swap (and hotend repair) @Rcschim | Uploaded 7 months ago | Updated 1 minute ago
Got the Artillery X3plus late december, was excited for the large print bed but couldnt share my review - since it wasn't clear if Geekbuying will sell them again (doesn't look like they do). Other speculations online tell us about support being dropped worldwide - and only available thru china. I opened a ticke when I broke my hotend (during an attempt to change the nozzle). Never got a reply...
📋 Specs, NOTES and findings:
- Large: 300x300x400mm
- fast (up to 300mm/sek)
- 300°C hotend 0.4mm Nozzle (found replacement for 0.6 or 0.8 as an upgrade!)
- fast 49pt. Auto Bedlevelling (but still oldschool manual leveling necc)
it has 6 wheels to adjust the bed!
the Auto bedlevel isnt 100% effective on the first layer
- Z offset -2.10
- PEI bed, large ;)
- dual z axis / dual motor
- Product Size(L x W x H): 500*410*850mm
- Linear advance, input shaper marlin 2.1.2
- Artillery X2 and X3 are DIFFERENT! (if you shop for replacement parts)
Many parts are cloned from var. sources ;)
- Hotend: like Bambu! (but different holes on the heatsink!! at least the thermistor and heating element fit!
- Printhead cover looks like ANKER ;)
- Removeable Screen idea from Elegoo?
💡 Replacement Thermistor and heating element:
https://www.amazon.de/dp/B0BW3WXVNR?psc=1&ref=ppx_yo2ov_dt_b_product_details
Nozzle: Bambu CHTs don't work! (too short)
✅ The longer Volcanoe are the right ones here: and cost only 2€ ;)
Advanc3D DaVolcano Nozzle aus Messing CuZn37
https://www.druckzeug.de/davolcano-nozzle-aus-messing-cuzn37-in-06mm-fuer-175mm-filament_1
💡 Artillery setup for Start/End GCode (from their Cura version)
Start GCode:
G12 C2
G92 E0 ; reset extruder
G28 Z
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position
G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line
G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little
G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line
G92 E0 ;
G1 Z1.0 F3000;
End GCode:
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
I stand for HONEST reviews and opinions! If you wanna support this idea please check my PATREON: bit.ly/2ESMtIO
Teaching Tech Flowtest: teachingtechyt.github.io/calibration.html#speed
my ArtyX3 yi homecamera mount: urlc.net/vWCi
Great test: https://www.3dheaven.de/artillery-x3-plus-im-test
💡 Replacement Thermistor and heating element:
https://www.amazon.de/dp/B0BW3WXVNR?psc=1&ref=ppx_yo2ov_dt_b_product_details
Advanc3D DaVolcano Nozzle aus Messing CuZn37 in 0.8mm
https://www.druckzeug.de/davolcano-nozzle-aus-messing-cuzn37-in-06mm-fuer-175mm-filament_1
DO YOU WANT TO SEE MORE???
►TOP Videos: http://goo.gl/MHfr1D
►Mountain DIVES: http://goo.gl/FfXPHa
►Product REVIEWS: http://goo.gl/mZkwHr
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Slam Dunk - FLYIN
I use EPIDEMIC SOUND, get your account here (affiliate): bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
► Discord Server: discord.gg/9fPs8cpxBS
► RCSchim@gmx.at
► https://www.FACEBOOK.com/RcSchim
► https://www.PATREON.com/RCSchim
► https://www.INSTAgram.com/rcschim
► https://rcschim.BLOGspot.com
●▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬▬●
00:00 Intro
00:25 Unboxing
05:01 Bed levelling
06:18 1st Print
09:40 Print Quality
12:19 Test: Large Print
13:36 Tips
14:01 BIGGER NOZZLE!
14:38 how to repair the hotend
16:25 FLOW Test with 0.8mm nozzle
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#RCSchim #artillery #3dprinting
Got the Artillery X3plus late december, was excited for the large print bed but couldnt share my review - since it wasn't clear if Geekbuying will sell them again (doesn't look like they do). Other speculations online tell us about support being dropped worldwide - and only available thru china. I opened a ticke when I broke my hotend (during an attempt to change the nozzle). Never got a reply...
📋 Specs, NOTES and findings:
- Large: 300x300x400mm
- fast (up to 300mm/sek)
- 300°C hotend 0.4mm Nozzle (found replacement for 0.6 or 0.8 as an upgrade!)
- fast 49pt. Auto Bedlevelling (but still oldschool manual leveling necc)
it has 6 wheels to adjust the bed!
the Auto bedlevel isnt 100% effective on the first layer
- Z offset -2.10
- PEI bed, large ;)
- dual z axis / dual motor
- Product Size(L x W x H): 500*410*850mm
- Linear advance, input shaper marlin 2.1.2
- Artillery X2 and X3 are DIFFERENT! (if you shop for replacement parts)
Many parts are cloned from var. sources ;)
- Hotend: like Bambu! (but different holes on the heatsink!! at least the thermistor and heating element fit!
- Printhead cover looks like ANKER ;)
- Removeable Screen idea from Elegoo?
💡 Replacement Thermistor and heating element:
https://www.amazon.de/dp/B0BW3WXVNR?psc=1&ref=ppx_yo2ov_dt_b_product_details
Nozzle: Bambu CHTs don't work! (too short)
✅ The longer Volcanoe are the right ones here: and cost only 2€ ;)
Advanc3D DaVolcano Nozzle aus Messing CuZn37
https://www.druckzeug.de/davolcano-nozzle-aus-messing-cuzn37-in-06mm-fuer-175mm-filament_1
💡 Artillery setup for Start/End GCode (from their Cura version)
Start GCode:
G12 C2
G92 E0 ; reset extruder
G28 Z
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position
G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line
G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little
G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line
G92 E0 ;
G1 Z1.0 F3000;
End GCode:
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
●▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
I stand for HONEST reviews and opinions! If you wanna support this idea please check my PATREON: bit.ly/2ESMtIO
Teaching Tech Flowtest: teachingtechyt.github.io/calibration.html#speed
my ArtyX3 yi homecamera mount: urlc.net/vWCi
Great test: https://www.3dheaven.de/artillery-x3-plus-im-test
💡 Replacement Thermistor and heating element:
https://www.amazon.de/dp/B0BW3WXVNR?psc=1&ref=ppx_yo2ov_dt_b_product_details
Advanc3D DaVolcano Nozzle aus Messing CuZn37 in 0.8mm
https://www.druckzeug.de/davolcano-nozzle-aus-messing-cuzn37-in-06mm-fuer-175mm-filament_1
DO YOU WANT TO SEE MORE???
►TOP Videos: http://goo.gl/MHfr1D
►Mountain DIVES: http://goo.gl/FfXPHa
►Product REVIEWS: http://goo.gl/mZkwHr
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro
●▬▬▬♫MUSIC▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Slam Dunk - FLYIN
I use EPIDEMIC SOUND, get your account here (affiliate): bit.ly/3p6OGE0
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
► Discord Server: discord.gg/9fPs8cpxBS
► RCSchim@gmx.at
► https://www.FACEBOOK.com/RcSchim
► https://www.PATREON.com/RCSchim
► https://www.INSTAgram.com/rcschim
► https://rcschim.BLOGspot.com
●▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬▬●
00:00 Intro
00:25 Unboxing
05:01 Bed levelling
06:18 1st Print
09:40 Print Quality
12:19 Test: Large Print
13:36 Tips
14:01 BIGGER NOZZLE!
14:38 how to repair the hotend
16:25 FLOW Test with 0.8mm nozzle
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#RCSchim #artillery #3dprinting
