Uploaded April 2021 | Updated November 2026, 2 days ago
The Artillery Hornet is finally a printer that doesn't try to copy the popular Ender-3 in every detail. It features a nice injection-molded enclosure and a really clean-looking wiring solution. It uses a 32bit mainboard with silent stepper drivers, nice and clean stock Marlin firmware, and even though not totally quiet, one of the least noisy printers I used for a while!
This is not a full review but from the results of the test part printed during the stream, the Artillery Hornet is a printer really worth taking a closer look at!
Website article: cnckitchen.com/blog/artillery-hornet-3d-printer-first-look
More on the Artillery Hornet currently starting at ~$240 (Affiliate Links):
AliExpress: https://s.click.aliexpress.com/e/_9HJ4sS
Banggood: banggood.com/custlink/vv3yIqBner
Amazon: geni.us/PY1ff
Check out my merch: teespring.com/stores/cnckitchen
โ My gear (Affiliate Links):
๐ฅ CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: geni.us/ZTBH
30mm f2.8 macro - Great Macro Lens: geni.us/vEwqD
12-35mm f2.6 - Great all-round lense: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
๐AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
๐ด LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Chapters:
00:00 Welcome!
01:45 Unboxing
19:45 Close Look at the Electronics
26:05 Assembly
44:40 Screen Peel
50:25 Bed leveling
54:45 Slicer Configuration (PrusaSlicer)
01:02:45 Test Print Start
02:02:00 Print results
02:05:35 Verdict
The Artillery Hornet is finally a printer that doesn't try to copy the popular Ender-3 in every detail. It features a nice injection-molded enclosure and a really clean-looking wiring solution. It uses a 32bit mainboard with silent stepper drivers, nice and clean stock Marlin firmware, and even though not totally quiet, one of the least noisy printers I used for a while!
This is not a full review but from the results of the test part printed during the stream, the Artillery Hornet is a printer really worth taking a closer look at!
Website article: cnckitchen.com/blog/artillery-hornet-3d-printer-first-look
More on the Artillery Hornet currently starting at ~$240 (Affiliate Links):
AliExpress: https://s.click.aliexpress.com/e/_9HJ4sS
Banggood: banggood.com/custlink/vv3yIqBner
Amazon: geni.us/PY1ff
Check out my merch: teespring.com/stores/cnckitchen
โ My gear (Affiliate Links):
๐ฅ CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: geni.us/ZTBH
30mm f2.8 macro - Great Macro Lens: geni.us/vEwqD
12-35mm f2.6 - Great all-round lense: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
๐AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
๐ด LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Chapters:
00:00 Welcome!
01:45 Unboxing
19:45 Close Look at the Electronics
26:05 Assembly
44:40 Screen Peel
50:25 Bed leveling
54:45 Slicer Configuration (PrusaSlicer)
01:02:45 Test Print Start
02:02:00 Print results
02:05:35 Verdict










