Uploaded October 2026 | Updated November 2026, 5 days ago
This is part 4 of the DIY go-kart belt grinder build. Today, I’m welding out the top frame and mounting the switch box. Here’s a quick tip to know when welding: don't ground to the table or the leg. Any weird contact points can arc and leave a burn, so clamp your ground to the part or the clamp instead. Weld sequencing is what keeps the frame square. Start with the outside corners, work the inside corners out, and leave the fillet welds for last. The motor I got from Amazon: the starter's mounting holes aren't perfect, so I skipped the measurements and marked the holes right off the box before drilling and tapping. Tomorrow I'm building the back half of the frame, where the motor and shifter lifter mount.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #sanding #metal #gokart
This is part 4 of the DIY go-kart belt grinder build. Today, I’m welding out the top frame and mounting the switch box. Here’s a quick tip to know when welding: don't ground to the table or the leg. Any weird contact points can arc and leave a burn, so clamp your ground to the part or the clamp instead. Weld sequencing is what keeps the frame square. Start with the outside corners, work the inside corners out, and leave the fillet welds for last. The motor I got from Amazon: the starter's mounting holes aren't perfect, so I skipped the measurements and marked the holes right off the box before drilling and tapping. Tomorrow I'm building the back half of the frame, where the motor and shifter lifter mount.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #sanding #metal #gokart










