Uploaded July 2024 | Updated September 2026, 2 weeks ago
Iot Clothes Hanger uses rain sensor to move the motor. There are 2 limit switches that has been used and place on the 3D printed motor bracket. These limit switches will be used to determine where the motor should stop. This project uses durian uno eps8266 and Blynk apps. When use automanual button, rain sensor detected water motor will slide the roof to the right and cover the clothes and when rain sensor not detecting any water motor will slide the roof to the left and expose the clothes to the sunlight. If you want to use the roof manually, you can press the roof_control button. The motor bracket was designed by using Solidworks Software. it also printed using Artillery Genius Pro.
For more information, kindly visit our website:
https://mybotic.com.my/durian-uno-series/arduino-stem-rbt-project-iot-smart-blynk-automatic-clothes-drying-system-with-durian-uno
Iot Clothes Hanger uses rain sensor to move the motor. There are 2 limit switches that has been used and place on the 3D printed motor bracket. These limit switches will be used to determine where the motor should stop. This project uses durian uno eps8266 and Blynk apps. When use automanual button, rain sensor detected water motor will slide the roof to the right and cover the clothes and when rain sensor not detecting any water motor will slide the roof to the left and expose the clothes to the sunlight. If you want to use the roof manually, you can press the roof_control button. The motor bracket was designed by using Solidworks Software. it also printed using Artillery Genius Pro.
For more information, kindly visit our website:
https://mybotic.com.my/durian-uno-series/arduino-stem-rbt-project-iot-smart-blynk-automatic-clothes-drying-system-with-durian-uno
