Uploaded January 2017 | Updated November 2026, 15 hours ago
Project images: pinterest.com/ericreinholdt
In the second video in our multi-part series on architectural model making we review my favorite model making materials and reasons you might choose one material over another. Stick around at the end for 12 quick material tips.
Material selection will be dependent – for the most part - on the model’s purpose as we discussed in part 1 and it’s the one factor that will most directly impact the finished cost of your model – in both real dollars and in time. More luxurious materials require more care to work with and are often less forgiving than inexpensive ones. For this reason, you’ll typically want to save the expensive materials for the more finished, presentation quality models or you may choose to use them strategically to highlight one particular portion of your model you want a client (or jury) to focus on.
I review in detail the following materials:
1) Cardstock (paper)
2) Kraft paper
3) Trace
4) Mylar
5) Corrugated cardboard
6) Chipboard
7) Foam
8) Foam core (and why I dislike it so!)
9) Clay
10) Museum board
11) Wood
12) Cork
13) Sheet plastics
I list a few unconventional materials too, things like: matchsticks, florist wire, guitar strings, sandpaper, zip ties, plaster, concrete, and wire screening.
At the end of the video I leave you with 12 quick material-based pro tips to motivate and inspire you.
What are your favorite materials? Have I left any out?
In the next video we'll take a tour of my studio and look at my model making toolkit. Please share if you found this information helpful...I invest a lot of time making each video and want to help as many as possible! Cheers...
// GEAR I USE //
DSLR CAMERA:
* Canon 70D: amzn.to/29klz7k
LENSES:
* Canon 24mm f2.8 Lens: amzn.to/29l7ac5
* Canon 40mm f2.8 Lens: amzn.to/29x2QcI
AUDIO:
* Rode VideoMic Pro (hotshoe mtd.): amzn.to/29qlNM3
* ATR-2100 USB (dynamic mic): amzn.to/2dFDaKp
ARCHITECTURE GEAR:
* Prismacolor Markers: thirtybyforty.com/markers
* Timelapse Camera: thirtybyforty.com/brinno
* AutoCAD LT: amzn.to/2dxjMDH
* SketchUp PRO: amzn.to/2cRcojz
* HP T120 Plotter: amzn.to/2dBGf1O
* Adobe CC Photography (Photoshop/Lightroom) Plan: amzn.to/2dhq5ap
STARTUP TOOLKIT:
* Architect + Entrepreneur Startup Toolkit: thirtybyforty.com/SPL
-~-~~-~~~-~~-~-
Please watch: "Making a Site Model - The Outpost Project"
youtube.com/watch?v=VsJrDScS5ZI
-~-~~-~~~-~~-~-
Project images: pinterest.com/ericreinholdt
In the second video in our multi-part series on architectural model making we review my favorite model making materials and reasons you might choose one material over another. Stick around at the end for 12 quick material tips.
Material selection will be dependent – for the most part - on the model’s purpose as we discussed in part 1 and it’s the one factor that will most directly impact the finished cost of your model – in both real dollars and in time. More luxurious materials require more care to work with and are often less forgiving than inexpensive ones. For this reason, you’ll typically want to save the expensive materials for the more finished, presentation quality models or you may choose to use them strategically to highlight one particular portion of your model you want a client (or jury) to focus on.
I review in detail the following materials:
1) Cardstock (paper)
2) Kraft paper
3) Trace
4) Mylar
5) Corrugated cardboard
6) Chipboard
7) Foam
8) Foam core (and why I dislike it so!)
9) Clay
10) Museum board
11) Wood
12) Cork
13) Sheet plastics
I list a few unconventional materials too, things like: matchsticks, florist wire, guitar strings, sandpaper, zip ties, plaster, concrete, and wire screening.
At the end of the video I leave you with 12 quick material-based pro tips to motivate and inspire you.
What are your favorite materials? Have I left any out?
In the next video we'll take a tour of my studio and look at my model making toolkit. Please share if you found this information helpful...I invest a lot of time making each video and want to help as many as possible! Cheers...
// GEAR I USE //
DSLR CAMERA:
* Canon 70D: amzn.to/29klz7k
LENSES:
* Canon 24mm f2.8 Lens: amzn.to/29l7ac5
* Canon 40mm f2.8 Lens: amzn.to/29x2QcI
AUDIO:
* Rode VideoMic Pro (hotshoe mtd.): amzn.to/29qlNM3
* ATR-2100 USB (dynamic mic): amzn.to/2dFDaKp
ARCHITECTURE GEAR:
* Prismacolor Markers: thirtybyforty.com/markers
* Timelapse Camera: thirtybyforty.com/brinno
* AutoCAD LT: amzn.to/2dxjMDH
* SketchUp PRO: amzn.to/2cRcojz
* HP T120 Plotter: amzn.to/2dBGf1O
* Adobe CC Photography (Photoshop/Lightroom) Plan: amzn.to/2dhq5ap
STARTUP TOOLKIT:
* Architect + Entrepreneur Startup Toolkit: thirtybyforty.com/SPL
-~-~~-~~~-~~-~-
Please watch: "Making a Site Model - The Outpost Project"
youtube.com/watch?v=VsJrDScS5ZI
-~-~~-~~~-~~-~-






![One Skill (+ item) Every Aspiring Architect Needs
Whats the most important skill to cultivate if you’re interested in becoming an architect? Learning to sketch. Sketching is an important part of the design process and a daily sketching habit will teach you to see the world as it is, to divine why buildings look the way they do and to understand proportion and scale. Sketching is invaluable for communicating your ideas in meetings to clients, to your colleagues and to tradespeople in the field during construction. For most designers, the sketch is where ideas are born.
Digital tools have their place in the design process too, but they serve a different purpose. The analog sketchbook is a place to think and to move more slowly. Its in digital space that we transform the thoughts and ideas into the documents well use to construct our architecture and to make them real. There’s room for both in the design process and each informs the other.
To celebrate the release of the first run of BLANK sketchbooks, I’m opening mine up so you can see how I use it in practice. I hope it shows you that ideation and exploration doesn’t require perfect technique or polished renderings. In fact, the imperfect nature of an open-ended sketch leads to novel ideas and better design resolutions. Follow along as I develop a few less than perfect sketches, share my thought process, a few drawing conventions and personal musings about the importance of building a sketching habit.
Special thanks to Mike Schiano and his company Airship Notebooks for helping make the BLANK notebook a reality. This sketchbook was designed with creatives in mind. It has everything I look for in a quality sketchbook.
Specs:
+ A5 size (5.8” x 8.3”) - portable, but not too small.
+ Cover: 650g chip, debossed (front + back) Heavy stock protects your work.
+ 50 pgs [ 70# - 100g ] White-cream stock. Works for pen + pencil.
+ 5mm dot grid. Helps with layout + proportion.
+ Red elastic closure keeps things tidy in your bag + serves as a placeholder
+ Double ring spiral binding lays flat on the page and works for both right and left-handed sketchers.
Get yours here: http://thirtybyforty.com/blank
JOIN MY ONLINE COURSE:
Enjoy my teaching style? Enroll here: https://thirtybyforty.com/a-e-course
DIGITAL DRAWING TEMPLATES:
* AutoCAD: http://thirtybyforty.com/autocad-template
* REVIT: http://thirtybyforty.com/revit-template
ARCHITECTS TOOLKIT:
* *NEW for 2020 ** Architect + Entrepreneur Startup Toolkit (includes lessons from the A+E Course): http://thirtybyforty.com/spl
ARCHITECTURE ESSENTIAL TOOLS:
* http://thirtybyforty.com/archi-gear
MODEL MAKING TOOLS + MATERIALS:
* https://thirtybyforty.com/blog/architectural-model-making-tips
PHOTOGRAPHY GEAR:
* http://thirtybyforty.com/my-photo-gear
ALL MY GEAR (UPDATED LIST):
*http://thirtybyforty.com/kit
#sketching #architect #blanksketchbook One Skill (+ item) Every Aspiring Architect Needs](https://i.ytimg.com/vi/YYW7exK_mI8/mqdefault.jpg)



