Uploaded February 2014 | Updated November 2026, 1 hour ago
I had some larger surplus old caps this time. Again the safety vent plugs were removed and replaced with epoxy to seal the capacitors. A small vise was used to hold the capacitors firmly in place. They both burst loudly, spewing their insides all over the bench and floor. Slow motion recorded at 240 and 480 frames/sec.
I had some larger surplus old caps this time. Again the safety vent plugs were removed and replaced with epoxy to seal the capacitors. A small vise was used to hold the capacitors firmly in place. They both burst loudly, spewing their insides all over the bench and floor. Slow motion recorded at 240 and 480 frames/sec.










