Uploaded October 2025 | Updated November 2026, 5 days ago
Apple Macintosh "Installing SIMMs" HOW TO GUIDE 1990, opening and installing computer motherboard memory on various early Macintosh systems, SE SE/30 Plus. This rescued vhs training film MacConnection is an entertaining look back at how to install SIMMs in various Mac computers. Color, 18 mins.
History: The SIMM ("Single In-Line Memory Module")
Before 1983, installing or upgrading computer memory (RAM) was a delicate and tedious process. Memory came in individual chips called DIPs (Dual In-line Package) chips. A computer motherboard would have rows of empty sockets, and to add memory, a technician had to carefully press 8, 16, or even 32 of these individual chips into the board one by one.
This method had three major flaws:
1. It was difficult: The chips had two rows of delicate pins that could easily bend or break.
2. It was error-prone: It was easy to insert a chip backward or damage it with static electricity.
3. It used a lot of space: All those individual sockets took up a huge amount of valuable real estate on the motherboard.
The SIMM --
In 1983, James E. Clayton of Wang Laboratories developed a simple but brilliant solution. Instead of putting sockets on the motherboard, he took a small, separate printed circuit board (PCB) and soldered the memory chips directly onto it. This self-contained "module" was then inserted into a single, simple slot on the motherboard.
SIMMs made memory installation faster and easier.
Ultimately, the SIMM became the undisputed standard for computer memory for over a decade before being succeeded by the DIMM (Dual In-line Memory Module) format still in use today.
Apple Macintosh "Installing SIMMs" HOW TO GUIDE 1990, opening and installing computer motherboard memory on various early Macintosh systems, SE SE/30 Plus. This rescued vhs training film MacConnection is an entertaining look back at how to install SIMMs in various Mac computers. Color, 18 mins.
History: The SIMM ("Single In-Line Memory Module")
Before 1983, installing or upgrading computer memory (RAM) was a delicate and tedious process. Memory came in individual chips called DIPs (Dual In-line Package) chips. A computer motherboard would have rows of empty sockets, and to add memory, a technician had to carefully press 8, 16, or even 32 of these individual chips into the board one by one.
This method had three major flaws:
1. It was difficult: The chips had two rows of delicate pins that could easily bend or break.
2. It was error-prone: It was easy to insert a chip backward or damage it with static electricity.
3. It used a lot of space: All those individual sockets took up a huge amount of valuable real estate on the motherboard.
The SIMM --
In 1983, James E. Clayton of Wang Laboratories developed a simple but brilliant solution. Instead of putting sockets on the motherboard, he took a small, separate printed circuit board (PCB) and soldered the memory chips directly onto it. This self-contained "module" was then inserted into a single, simple slot on the motherboard.
SIMMs made memory installation faster and easier.
Ultimately, the SIMM became the undisputed standard for computer memory for over a decade before being succeeded by the DIMM (Dual In-line Memory Module) format still in use today.










