Adelaide Robot Combat | Antweight Robot Construction - Shrapnel! @AdelaideRobotCombat | Uploaded 8 years ago | Updated 2 minutes ago
This is the construction and assembly of my 3D printed Antweight bot, Shrapnel. (150 gram weight class)
Shrapnel is a slow moving spinner robot. He spins a 25 gram stainless steel bar at around 10,000 RPM!
I've put his design up on Thingiverse. Check it out for more details on how to assemble your own Shrapnel!
http://www.thingiverse.com/thing:1692075
Please check out our Facebook group or Robowars.org forum thread for more details about our bot fighting group or to come and check us out next month:
facebook.com/groups/AdelaideRobotCombat
http://robowars.org/forum/viewtopic.php?t=2111&start=120
Parts list:
- 2x 50:1 microgear motors. http://botbitz.com.au/index.php?route=product/product&path=64&product_id=55
- 2x Pololu 40x7mm wheels. https://www.robotgear.com.au/Product.aspx/Details/3699-Pololu-Wheel-40-7mm-Pair-Black
- 2x brushed ESC's. http://www.ebay.com.au/itm/131645159656?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
- Orange micro aircraft receiver. I use a Spectrum DX6 aircraft transmitter to control Shrapnel. I used this receiver because it was compatible with Spectrum and gained me a lot of spare weight and free space for this bot. http://www.hobbyking.com/hobbyking/store/__47012__OrangeRx_R415X_DSMX_DSM2_Compatible_4Ch_Micro_2_4Ghz_Receiver.html
- 260mAh battery (this higher capacity is required to maintain a high discharge current but 180mAh could be used too). http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=37342
- Turnigy brushless ESC. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=30734
- 2300kV brushless motor. http://www.ebay.com.au/itm/Genuine-DYS-BE1806-2300KV-Brushless-Motor-2-3S-for-Mini-Multicopter-QAV250-/251939269040?hash=item3aa8c029b0&_uhb=1
Audio Credits:
Inspired, Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0
This is the construction and assembly of my 3D printed Antweight bot, Shrapnel. (150 gram weight class)
Shrapnel is a slow moving spinner robot. He spins a 25 gram stainless steel bar at around 10,000 RPM!
I've put his design up on Thingiverse. Check it out for more details on how to assemble your own Shrapnel!
http://www.thingiverse.com/thing:1692075
Please check out our Facebook group or Robowars.org forum thread for more details about our bot fighting group or to come and check us out next month:
facebook.com/groups/AdelaideRobotCombat
http://robowars.org/forum/viewtopic.php?t=2111&start=120
Parts list:
- 2x 50:1 microgear motors. http://botbitz.com.au/index.php?route=product/product&path=64&product_id=55
- 2x Pololu 40x7mm wheels. https://www.robotgear.com.au/Product.aspx/Details/3699-Pololu-Wheel-40-7mm-Pair-Black
- 2x brushed ESC's. http://www.ebay.com.au/itm/131645159656?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
- Orange micro aircraft receiver. I use a Spectrum DX6 aircraft transmitter to control Shrapnel. I used this receiver because it was compatible with Spectrum and gained me a lot of spare weight and free space for this bot. http://www.hobbyking.com/hobbyking/store/__47012__OrangeRx_R415X_DSMX_DSM2_Compatible_4Ch_Micro_2_4Ghz_Receiver.html
- 260mAh battery (this higher capacity is required to maintain a high discharge current but 180mAh could be used too). http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=37342
- Turnigy brushless ESC. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=30734
- 2300kV brushless motor. http://www.ebay.com.au/itm/Genuine-DYS-BE1806-2300KV-Brushless-Motor-2-3S-for-Mini-Multicopter-QAV250-/251939269040?hash=item3aa8c029b0&_uhb=1
Audio Credits:
Inspired, Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0
