Joe Pie | Anniversary Video -- Easy and STRESS FREE Single Point Threading. @joepie221 | Uploaded June 2024 | Updated October 2024, 13 hours ago.
This is a re-load of my very first machining video ever, released on June 9, 2016.
SAFETY WARNING.......Please exercise caution and use good judgement when running a machine with a true screw on chuck in reverse. Excessive spindle load with the machine in reverse could potentially unscrew your chuck causing damage and personal injury. Refer to your operator or machine manual for safety suggestions. Cam lock or keyed and collared chucks are the safest to run in reverse. This demonstration is for reference only and should be used at your own discretion. A short demonstration of a different way to run a single point thread on an engine lathe. This technique allows for the use of a positive stop without the worry of shearing off the lead screw shear pin. You can increase your rpm and avoid the stress of the split second half nut disengagement. You will never do threads the old way again! This was my first ever machining video, so please excuse the shaky nature of the material. Thanks.
A huge thanks to everyone that has subscribed, commented and joined my Patreon group since then. Stay well.
Patreon Support: patreon.com/joepie
Website: advancedinnovationsllc.com
Web Store: advancedinnovationsllc.com/shop
Amazon Affiliate Links: NOTE, as an amazon affiliate I do earn a small royalty from sales linked here.
Micrometers
Mitutoyo Uni-Mic -- amzn.to/3Qqgr8N
SHARS Blade Mic -- amzn.to/3JH1VWG
Metal Polish
Blue Magic metal polish: amzn.to/3ENEj0T
Eye Loupe
B&L Eye Loupe: amzn.to/3TU89Vw
Spindle mount indicator holders
Indicol 178: amzn.to/3NycM4s
Generic: amzn.to/3QZ6xK3
Scales
Postage Scale: amzn.to/3oCxeY0
This is a re-load of my very first machining video ever, released on June 9, 2016.
SAFETY WARNING.......Please exercise caution and use good judgement when running a machine with a true screw on chuck in reverse. Excessive spindle load with the machine in reverse could potentially unscrew your chuck causing damage and personal injury. Refer to your operator or machine manual for safety suggestions. Cam lock or keyed and collared chucks are the safest to run in reverse. This demonstration is for reference only and should be used at your own discretion. A short demonstration of a different way to run a single point thread on an engine lathe. This technique allows for the use of a positive stop without the worry of shearing off the lead screw shear pin. You can increase your rpm and avoid the stress of the split second half nut disengagement. You will never do threads the old way again! This was my first ever machining video, so please excuse the shaky nature of the material. Thanks.
A huge thanks to everyone that has subscribed, commented and joined my Patreon group since then. Stay well.
Patreon Support: patreon.com/joepie
Website: advancedinnovationsllc.com
Web Store: advancedinnovationsllc.com/shop
Amazon Affiliate Links: NOTE, as an amazon affiliate I do earn a small royalty from sales linked here.
Micrometers
Mitutoyo Uni-Mic -- amzn.to/3Qqgr8N
SHARS Blade Mic -- amzn.to/3JH1VWG
Metal Polish
Blue Magic metal polish: amzn.to/3ENEj0T
Eye Loupe
B&L Eye Loupe: amzn.to/3TU89Vw
Spindle mount indicator holders
Indicol 178: amzn.to/3NycM4s
Generic: amzn.to/3QZ6xK3
Scales
Postage Scale: amzn.to/3oCxeY0
