The Real Sam Prentice | AnkerMake M5: Your 3D Printing Powerhouse? @TheRealSamPrentice | Uploaded October 2023 | Updated October 2024, 6 days ago.
AnkerMake M5: Your 3D Printing Powerhouse? The AnkerMake M5 is a lot of things, but is it better or worse than the M5C? Was I just wanting something because the other thing had it? and was it worth it?
Thanks as always to my video sponsor pcbway.com for supporting me and this video, make sure you check them out for all of the good reasons, to make and inspire not only pcb's but also 3d printing.
Where to buy? Here: https://shorturl.at/erQS7 and get $100 off with code "AnkerMakeM520" You are welcome!
My review on the M5C as promised can be found here youtube.com/watch?v=lOnn-dsboRg
The AnkerMake M5 offers a fresh take on a familiar design, building upon the foundation of a standard V-slot wheel-tracked 3D printer with a blend of striking aesthetics, dynamic pulsating LED lighting, a top-tier camera, and the promise of intelligent print failure detection.
While it excels in delivering high-quality prints swiftly, the integration of its additional features exhibits occasional inconsistencies. The AI print failure detection system can be somewhat inconsistent in its performance, and the camera's live feed is exclusively accessible through the smartphone app. While each feature individually showcases promising ideas, they have yet to seamlessly harmonize into a unified experience.
Key Specs at a Glance:
Build Volume: 235 x 235 x 250 mm
Maximum Hot End/Heated Bed Temperatures: 260 °C / 100 °C
Its fast and online!
AnkerMake M5: Your 3D Printing Powerhouse? The AnkerMake M5 is a lot of things, but is it better or worse than the M5C? Was I just wanting something because the other thing had it? and was it worth it?
Thanks as always to my video sponsor pcbway.com for supporting me and this video, make sure you check them out for all of the good reasons, to make and inspire not only pcb's but also 3d printing.
Where to buy? Here: https://shorturl.at/erQS7 and get $100 off with code "AnkerMakeM520" You are welcome!
My review on the M5C as promised can be found here youtube.com/watch?v=lOnn-dsboRg
The AnkerMake M5 offers a fresh take on a familiar design, building upon the foundation of a standard V-slot wheel-tracked 3D printer with a blend of striking aesthetics, dynamic pulsating LED lighting, a top-tier camera, and the promise of intelligent print failure detection.
While it excels in delivering high-quality prints swiftly, the integration of its additional features exhibits occasional inconsistencies. The AI print failure detection system can be somewhat inconsistent in its performance, and the camera's live feed is exclusively accessible through the smartphone app. While each feature individually showcases promising ideas, they have yet to seamlessly harmonize into a unified experience.
Key Specs at a Glance:
Build Volume: 235 x 235 x 250 mm
Maximum Hot End/Heated Bed Temperatures: 260 °C / 100 °C
Its fast and online!