Uploaded August 2026 | Updated November 2026, 1 day ago
In this episode of the Fisher 30A Analysis Series, we take a deep dive into one of the most important sections of the amplifier—the EL84 push-pull output stage.
We'll follow the audio signal from the cathodyne phase inverter into the two EL84 output tubes and examine how they work together to produce clean, efficient power. Along the way, we'll explore why Fisher chose cathode bias, how the shared cathode resistor establishes the operating point, and how Class AB operation allows each tube to amplify opposite halves of the waveform.
Topics covered include:
• How the cathodyne phase inverter drives the EL84 output tubes
• Why one grid stopper is 2.2kΩ while the other is 33kΩ
• Shared cathode bias and automatic tube current balancing
• The function of the 140Ω cathode resistor and bypass capacitor
• Plate current vs. cathode current explained
• Screen grid operation and screen current
• How the output transformer combines two out-of-phase signals into one amplified waveform
• Open-loop vs. closed-loop gain
• Why push-pull amplifiers cancel even-order harmonics
===
Video Breakdown:
0:00:00 - Introduction
0:01:29 – The Output Stage
0:02:51 – Single Ended vs. Push Pull
0:07:18 – C5 & C6 Coupling Capacitors
0:10:40 – Upper & Lower Grid Stopper Resistors
0:17:11 – Upper & Lower Grid Leak Resistors
0:18:16 – V2 & V3 EL84 Output Tubes
0:25:56 – Common Cathode Resistor
0:29:17 – Cathode Bypass Capacitor
0:32:52 – T2 Output Transformer
In this episode of the Fisher 30A Analysis Series, we take a deep dive into one of the most important sections of the amplifier—the EL84 push-pull output stage.
We'll follow the audio signal from the cathodyne phase inverter into the two EL84 output tubes and examine how they work together to produce clean, efficient power. Along the way, we'll explore why Fisher chose cathode bias, how the shared cathode resistor establishes the operating point, and how Class AB operation allows each tube to amplify opposite halves of the waveform.
Topics covered include:
• How the cathodyne phase inverter drives the EL84 output tubes
• Why one grid stopper is 2.2kΩ while the other is 33kΩ
• Shared cathode bias and automatic tube current balancing
• The function of the 140Ω cathode resistor and bypass capacitor
• Plate current vs. cathode current explained
• Screen grid operation and screen current
• How the output transformer combines two out-of-phase signals into one amplified waveform
• Open-loop vs. closed-loop gain
• Why push-pull amplifiers cancel even-order harmonics
===
Video Breakdown:
0:00:00 - Introduction
0:01:29 – The Output Stage
0:02:51 – Single Ended vs. Push Pull
0:07:18 – C5 & C6 Coupling Capacitors
0:10:40 – Upper & Lower Grid Stopper Resistors
0:17:11 – Upper & Lower Grid Leak Resistors
0:18:16 – V2 & V3 EL84 Output Tubes
0:25:56 – Common Cathode Resistor
0:29:17 – Cathode Bypass Capacitor
0:32:52 – T2 Output Transformer










