The Next Layer | An Open Letter to the 3D Printing Community @thenextlayer | Uploaded July 2024 | Updated October 2024, 3 hours ago.
I'm pretty sure this video is going to bomb, but I just can't keep silent anymore. I've been stewing on this for a couple weeks at this point, and I honestly just need to get it off of my chest. (There is no sponsor for this video... go support your favorite open source project!)
One of the most incredible things about the 3D printing community, without a doubt, is the collaborative, open source nature. It's mind-blowing, actually, that in our little corner of the internet, people contribute so much of their hard work and talent towards creating things that all of us can use and enjoy. I absolutely love it.
But with that said, as I've gone deeper into this community, I've come to notice what I believe to be a major issue that is holding back our beloved little community. The people at the forefront - the ones moving us forward with true innovations that the rest of the industry later adopts (i.e. klipper, mainsail, fluidd, orcaslicer, the ercf / enraged rabbit carrot feeder v2, freecad, stealthchanger, the voron tool changer, tradrack, type things) - are not being compensated for their work.
I wrote this from the heart, and know that I was just as guilty as any of us. But, the more I thought about it, the more I realized we need to change it. So, to be the change I wish to see, I made donations to Voron Design, Nadir, OrcaSlicer, Klipper, and Mainsail before requesting that you guys do the same.
I hope you'll take the time to listen to the argument I have to make, and whether or not you agree, I'd love to hear your thoughts in the comments below. I read them all, and try to respond to as many as I can.
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
💰 SUPPORT THESE PROJECTS: 💰
👉 OrcaSlicer: ko-fi.com/SoftFever or paypal.me/softfever3d
👉 Klipper: ko-fi.com/koconnor or patreon.com/koconnor
👉 Mainsail: https://docs.mainsail.xyz/#support-mainsail
👉 Fluidd: github.com/fluidd-core/fluidd
👉 Octoprint: octoprint.org/support-octoprint
👉 Voron Design: vorondesign.com
👉 FreeCAD: freecad.org/sponsor.php
👉 @nadir3D (Xenomorph, Spartacus): paypal.me/NDRNADIR @UC5lzueDDE7wtiaKgIaUr_Iw
👉 Stealthchanger: github.com/DraftShift/StealthChanger
👉 Tapchanger: No donation link found! github.com/viesturz/tapchanger
👉 Enraged Rabbit Carrot Feeder (ERCF v2): No donation link found! github.com/Enraged-Rabbit-Community/ERCF_v2
👉 Happy Hare: github.com/moggieuk/Happy-Hare
👉 Tradrack: No donation link found! github.com/Annex-Engineering/TradRack
👉 8-Track MMU: No donation link found! github.com/ArmoredTurtle/8-Track-Raven-Alpha
👉 DAKSH Voron toolchanger: No donation link found! github.com/ankurv2k6/daksh-toolchanger-v2
👉 YMIR/FENRIR 3D Printers by @MakerViking : patreon.com/makerviking
👉 VzBot by @Vez3D: github.com/VzBoT3D/VzBoT-Vz330
👉 Positron 3D Printer: paypal.com/donate/?hosted_button_id=YGPRVTSHN4FQG
👉 Hedgehog Makes 3D Printing Support: patreon.com/hedgehogmakes
👉 Am I missing your project? Message me on Discord: @jonathanalevi
🔗 OTHER LINKS MENTIONED IN THE VIDEO: 🔗
👉 Get the Sovol SV08 (and help support the Voron project!): jle.vi/sovol
👉 Get Voron from LDO (and help contribute to the Voron project!): jle.vi/voron
👉 Buy from BigTreeTech (who supports Klipper!): jle.vi/bigtreetech
👉 Buy from Obico (who supports Klipper!): jle.vi/obico
👉 My Voron build livestreams: youtube.com/playlist?list=PLNAIMkOXd_V-w8ZswanKWks2KKJz9DipJ
👉 My Enraged Rabbit Carrot Feeder (ERCF V2) build livestreams: youtube.com/playlist?list=PLNAIMkOXd_V8UITY13F497-lr_v0yXx3x
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
Business inquiries: thenextlayer@influint.co
#3dprinting #3dprinted #3dprinter
I'm pretty sure this video is going to bomb, but I just can't keep silent anymore. I've been stewing on this for a couple weeks at this point, and I honestly just need to get it off of my chest. (There is no sponsor for this video... go support your favorite open source project!)
One of the most incredible things about the 3D printing community, without a doubt, is the collaborative, open source nature. It's mind-blowing, actually, that in our little corner of the internet, people contribute so much of their hard work and talent towards creating things that all of us can use and enjoy. I absolutely love it.
But with that said, as I've gone deeper into this community, I've come to notice what I believe to be a major issue that is holding back our beloved little community. The people at the forefront - the ones moving us forward with true innovations that the rest of the industry later adopts (i.e. klipper, mainsail, fluidd, orcaslicer, the ercf / enraged rabbit carrot feeder v2, freecad, stealthchanger, the voron tool changer, tradrack, type things) - are not being compensated for their work.
I wrote this from the heart, and know that I was just as guilty as any of us. But, the more I thought about it, the more I realized we need to change it. So, to be the change I wish to see, I made donations to Voron Design, Nadir, OrcaSlicer, Klipper, and Mainsail before requesting that you guys do the same.
I hope you'll take the time to listen to the argument I have to make, and whether or not you agree, I'd love to hear your thoughts in the comments below. I read them all, and try to respond to as many as I can.
🤫 Get my custom filament and printer profiles, buyers guides, and much, much more on Patreon: patreon.com/thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
💰 SUPPORT THESE PROJECTS: 💰
👉 OrcaSlicer: ko-fi.com/SoftFever or paypal.me/softfever3d
👉 Klipper: ko-fi.com/koconnor or patreon.com/koconnor
👉 Mainsail: https://docs.mainsail.xyz/#support-mainsail
👉 Fluidd: github.com/fluidd-core/fluidd
👉 Octoprint: octoprint.org/support-octoprint
👉 Voron Design: vorondesign.com
👉 FreeCAD: freecad.org/sponsor.php
👉 @nadir3D (Xenomorph, Spartacus): paypal.me/NDRNADIR @UC5lzueDDE7wtiaKgIaUr_Iw
👉 Stealthchanger: github.com/DraftShift/StealthChanger
👉 Tapchanger: No donation link found! github.com/viesturz/tapchanger
👉 Enraged Rabbit Carrot Feeder (ERCF v2): No donation link found! github.com/Enraged-Rabbit-Community/ERCF_v2
👉 Happy Hare: github.com/moggieuk/Happy-Hare
👉 Tradrack: No donation link found! github.com/Annex-Engineering/TradRack
👉 8-Track MMU: No donation link found! github.com/ArmoredTurtle/8-Track-Raven-Alpha
👉 DAKSH Voron toolchanger: No donation link found! github.com/ankurv2k6/daksh-toolchanger-v2
👉 YMIR/FENRIR 3D Printers by @MakerViking : patreon.com/makerviking
👉 VzBot by @Vez3D: github.com/VzBoT3D/VzBoT-Vz330
👉 Positron 3D Printer: paypal.com/donate/?hosted_button_id=YGPRVTSHN4FQG
👉 Hedgehog Makes 3D Printing Support: patreon.com/hedgehogmakes
👉 Am I missing your project? Message me on Discord: @jonathanalevi
🔗 OTHER LINKS MENTIONED IN THE VIDEO: 🔗
👉 Get the Sovol SV08 (and help support the Voron project!): jle.vi/sovol
👉 Get Voron from LDO (and help contribute to the Voron project!): jle.vi/voron
👉 Buy from BigTreeTech (who supports Klipper!): jle.vi/bigtreetech
👉 Buy from Obico (who supports Klipper!): jle.vi/obico
👉 My Voron build livestreams: youtube.com/playlist?list=PLNAIMkOXd_V-w8ZswanKWks2KKJz9DipJ
👉 My Enraged Rabbit Carrot Feeder (ERCF V2) build livestreams: youtube.com/playlist?list=PLNAIMkOXd_V8UITY13F497-lr_v0yXx3x
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
Business inquiries: thenextlayer@influint.co
#3dprinting #3dprinted #3dprinter
