Uploaded March 2022 | Updated November 2026, 3 days ago
An Atari ST with a VGA2SCART and an OSSC used together
With some help, I do finally get a good image from the ST in Hi mode.
Link from @VideogameBucko to VGP forums. (Thanks goes to both Bucko and Marlin Followell!)
videogameperfection.com/forums/topic/need-some-help-adjusting-atari-st-high-resolution-image
"I finally figured out the proper resolution to make adjustments to was 640×384. I’m setup with Line2x and Upsample2x. From there, I have the following settings to finally get the image to center properly and get the vertical height correct.
H.Samplerate: 800
H.Synclength 96
H.backporch 110
H.Active 640
V.Synclength 2
V.backporch 34
V.Active 420"
Then my extra little bit...
Video in proc | Video LPF | 9MHz (SDTV)
While using a TV/Monitor that has a 4:3 mode.
All company names mentioned, are theirs, I'm just mentioning them in passing!
An Atari ST with a VGA2SCART and an OSSC used together
With some help, I do finally get a good image from the ST in Hi mode.
Link from @VideogameBucko to VGP forums. (Thanks goes to both Bucko and Marlin Followell!)
videogameperfection.com/forums/topic/need-some-help-adjusting-atari-st-high-resolution-image
"I finally figured out the proper resolution to make adjustments to was 640×384. I’m setup with Line2x and Upsample2x. From there, I have the following settings to finally get the image to center properly and get the vertical height correct.
H.Samplerate: 800
H.Synclength 96
H.backporch 110
H.Active 640
V.Synclength 2
V.backporch 34
V.Active 420"
Then my extra little bit...
Video in proc | Video LPF | 9MHz (SDTV)
While using a TV/Monitor that has a 4:3 mode.
All company names mentioned, are theirs, I'm just mentioning them in passing!










