Uploaded July 2026 | Updated September 2026, 1 week ago
Sunlu have kindly sent me their new, soon to be released, AMS Lite Heater Filament Dryer.
Can be bought here : geni.us/TL7BU
It's essentially a heated chamber that attaches to your existing AMS Lite and you can dry your filament at the temp and at the time you want.
Here are some stats for you :
Product Name - 3D Printing-Mate
Model - AMS Lite Heater
Product Dimentsions - 510 mm X270 mm x265mm(LWH)
Net Weight - 3.4kg
Operating Environment - Temperature: 10°C-35°C, Relative Humidity: ≤95%
Work Temperature Range - 35°C-70°C
Humidity Display Range - 10%-90%
Time Setting Range - 0-99H
Power Input Specifications(Ensure the voltage matches your local supply before use.) - AC 110V 60Hz or AC 220V 50Hz
Maximum Operating Current - 2.2A@230V 4.15A @120V
Rated Power 370W
Pre-orders open on 20th July
Super Early Bird Price: USD $99.99 for the first 200 units.
Available during the first month of the pre-sale period.
Early Bird Price: USD $109.99 for units 201–1,000.
Pre-Sale Price: USD $119.99 for units 1,001 and above.
Regular Price: USD $129.99 after the first month of the pre-sale period.
store.sunlu.com/products/sunlu-ams-lite-heater-upgraded-your-bambu-lab-ams-lite
SUNLU is celebrating their 13th anniversary this year, so im hoping for a decent deal here and there.
They're also planning to build a US factory which *should* lead to quicker delivery times.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
From Sunlu :
“Before launch, the SUNLU AMS Lite Heater underwent extensive internal validation, including:
●Thermal distribution testing to verify that the dual-channel airflow design heats the filament area evenly while keeping the temperature around the AMS Lite's electronics (motors, sensors, and control board) within safe operating limits.
●Long-term reliability testing, including continuous operation at elevated temperatures, to validate temperature control stability and the durability of the heating system.
●Long-duration printing tests with simultaneous heating and printing to ensure stable filament feeding and normal AMS Lite operation.
●Safety protection verification, including independent over-temperature monitoring, thermal cutoff, and hardware fuse protection, to ensure the system responds safely under abnormal conditions.
●Compatibility testing to confirm that the heater is a non-invasive upgrade that does not modify the AMS Lite's internal circuitry or original structure.
Throughout our long-term testing, we did not observe abnormal behavior, overheating of the AMS Lite electronics, or hardware damage related to the heater. The product is also designed to meet relevant safety standards, including CE, RoHS, and ETL requirements.
The AMS Lite Heater is designed as a plug-and-play replacement top cover, with no modifications to the AMS Lite itself. Under normal use, SUNLU provides a one-year warranty for the heater. If any issue is believed to be related to the heater, our support team will work with the customer to investigate and provide appropriate assistance.”
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My Tubs setup : youtu.be/eNmzb1khBYs
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#sunlu #amslite #bambu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Where to buy all my kit :
AMS Lite Cable Extension : amzn.to/4aA6YGh
4L Cereal Tub : geni.us/eCBOFcA
Glue :
KraftProtz : geni.us/TAwXM
Shelving : amzn.to/40rWVxu
Snippers : amzn.to/4r0NVtQ
Hygrometer : geni.us/VlKofB
Desiccant : amzn.to/3OF4vC7
USB Stick : amzn.to/4tYENIR
Build Plates :
Yoopai : amzn.to/4kYfORO
Glacier Pro : amzn.to/4tUkexv
Fanttik Rotary Tool : amzn.to/4r2ExGh
Fanttik V10 Duster : amzn.to/3NKiHd2
Fanttik Measure : amzn.to/4sMPNIg
Magnets : amzn.to/4dvo0WC
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
**** USEFUL LINKS ****
Subscribe here : youtube.com/c/maincave?sub_confirmation=1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
**** CONTACT INFO ****
Email : MainCaveContact@gmail.com
Twitter : twitter.com/MainCave
Instagram : instagram.com/MainCaveInsta
Subscribe here :
youtube.com/c/maincave?sub_confirmation=1
All enquiries to : MainCaveContact@gmail.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For all the latest prices on the product shown, please visit the links at the top.
** All prices stated are correct on the date of recording and may change over time**
Some of the links above I may earn commission from due to being affiliate links with no extra cost to you. I really appreciate the support.
Sunlu sent me this item but no money has exchanged hands and they have not told me anything to say nor have they seen this video before publishing.
0:00 Intro
0:54 Unboxing
2:02 What does it do
3:24 Setup
4:15 Overview
7:37 Results
16:42 Outro
Sunlu have kindly sent me their new, soon to be released, AMS Lite Heater Filament Dryer.
Can be bought here : geni.us/TL7BU
It's essentially a heated chamber that attaches to your existing AMS Lite and you can dry your filament at the temp and at the time you want.
Here are some stats for you :
Product Name - 3D Printing-Mate
Model - AMS Lite Heater
Product Dimentsions - 510 mm X270 mm x265mm(LWH)
Net Weight - 3.4kg
Operating Environment - Temperature: 10°C-35°C, Relative Humidity: ≤95%
Work Temperature Range - 35°C-70°C
Humidity Display Range - 10%-90%
Time Setting Range - 0-99H
Power Input Specifications(Ensure the voltage matches your local supply before use.) - AC 110V 60Hz or AC 220V 50Hz
Maximum Operating Current - 2.2A@230V 4.15A @120V
Rated Power 370W
Pre-orders open on 20th July
Super Early Bird Price: USD $99.99 for the first 200 units.
Available during the first month of the pre-sale period.
Early Bird Price: USD $109.99 for units 201–1,000.
Pre-Sale Price: USD $119.99 for units 1,001 and above.
Regular Price: USD $129.99 after the first month of the pre-sale period.
store.sunlu.com/products/sunlu-ams-lite-heater-upgraded-your-bambu-lab-ams-lite
SUNLU is celebrating their 13th anniversary this year, so im hoping for a decent deal here and there.
They're also planning to build a US factory which *should* lead to quicker delivery times.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
From Sunlu :
“Before launch, the SUNLU AMS Lite Heater underwent extensive internal validation, including:
●Thermal distribution testing to verify that the dual-channel airflow design heats the filament area evenly while keeping the temperature around the AMS Lite's electronics (motors, sensors, and control board) within safe operating limits.
●Long-term reliability testing, including continuous operation at elevated temperatures, to validate temperature control stability and the durability of the heating system.
●Long-duration printing tests with simultaneous heating and printing to ensure stable filament feeding and normal AMS Lite operation.
●Safety protection verification, including independent over-temperature monitoring, thermal cutoff, and hardware fuse protection, to ensure the system responds safely under abnormal conditions.
●Compatibility testing to confirm that the heater is a non-invasive upgrade that does not modify the AMS Lite's internal circuitry or original structure.
Throughout our long-term testing, we did not observe abnormal behavior, overheating of the AMS Lite electronics, or hardware damage related to the heater. The product is also designed to meet relevant safety standards, including CE, RoHS, and ETL requirements.
The AMS Lite Heater is designed as a plug-and-play replacement top cover, with no modifications to the AMS Lite itself. Under normal use, SUNLU provides a one-year warranty for the heater. If any issue is believed to be related to the heater, our support team will work with the customer to investigate and provide appropriate assistance.”
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My Tubs setup : youtu.be/eNmzb1khBYs
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#sunlu #amslite #bambu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Where to buy all my kit :
AMS Lite Cable Extension : amzn.to/4aA6YGh
4L Cereal Tub : geni.us/eCBOFcA
Glue :
KraftProtz : geni.us/TAwXM
Shelving : amzn.to/40rWVxu
Snippers : amzn.to/4r0NVtQ
Hygrometer : geni.us/VlKofB
Desiccant : amzn.to/3OF4vC7
USB Stick : amzn.to/4tYENIR
Build Plates :
Yoopai : amzn.to/4kYfORO
Glacier Pro : amzn.to/4tUkexv
Fanttik Rotary Tool : amzn.to/4r2ExGh
Fanttik V10 Duster : amzn.to/3NKiHd2
Fanttik Measure : amzn.to/4sMPNIg
Magnets : amzn.to/4dvo0WC
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
**** USEFUL LINKS ****
Subscribe here : youtube.com/c/maincave?sub_confirmation=1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
**** CONTACT INFO ****
Email : MainCaveContact@gmail.com
Twitter : twitter.com/MainCave
Instagram : instagram.com/MainCaveInsta
Subscribe here :
youtube.com/c/maincave?sub_confirmation=1
All enquiries to : MainCaveContact@gmail.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For all the latest prices on the product shown, please visit the links at the top.
** All prices stated are correct on the date of recording and may change over time**
Some of the links above I may earn commission from due to being affiliate links with no extra cost to you. I really appreciate the support.
Sunlu sent me this item but no money has exchanged hands and they have not told me anything to say nor have they seen this video before publishing.
0:00 Intro
0:54 Unboxing
2:02 What does it do
3:24 Setup
4:15 Overview
7:37 Results
16:42 Outro
