Uploaded August 2026 | Updated November 2026, 21 hours ago
Is your Bambu Lab AMS 2 Pro not feeding filament, throwing feed errors, or stuck with a piece of broken filament inside the internal hub? In this step-by-step tutorial, we'll show you how to diagnose, disassemble, and repair a filament jam in the AMS 2 Pro Internal Hub so you can get back to printing.
Whether your filament snapped during unloading or became lodged inside the AMS 2 Pro, this guide walks through the process of identifying the jam, safely opening the internal hub, removing the broken filament, and reassembling everything correctly.
This tutorial focuses specifically on clearing a filament jam in the AMS 2 Pro Internal Hub. If your issue is caused by a failed sensor or another hardware problem, additional troubleshooting may be required.
Official Bambu Lab Wiki: AMS 2 Pro Broken Filament Removal Internal Hub wiki.bambulab.com/en/ams-2-pro/remove-broken-stuck-material
► SHOP 3D PRINTING CANADA: https://2.ht/c
► SHOP USA STORE: https://2.ht/u
► OUR PRINTING SERVICES: https://2.ht/p
► DISCUSS ON OUR COMMUNITY FORUM: https://2.ht/s
CHAPTERS
━━━━━━━━━━━━━━━━━━━━━━━━━━━
0:00 Intro
0:39 Required Tools
0:45 Disassembly
2:43 Identify Filament Jam
2:58 Open Hub Idler Lever
3:14 Remove Broken Filament
3:52 Assembly
5:15 Bonus Tip: Rubber PTFE Button
5:48 Assembly
6:08 Finish Testing
FOLLOW US
Facebook: facebook.com/3dprintingcanada
Instagram: instagram.com/3d.printing.canada
TikTok: tiktok.com/@3dprinting.canada
Twitter: twitter.com/3dprintingcan
CREDITS
Host & Production: Matt
Production & Camera: Spencer
Editing: Martin - rast.media
MUSIC
Summer Breeze - Mizlo epidemicsound.com/music/tracks/a7830ee4-2ca5-4490-b49e-0bd1e9ee7ce2
Is your Bambu Lab AMS 2 Pro not feeding filament, throwing feed errors, or stuck with a piece of broken filament inside the internal hub? In this step-by-step tutorial, we'll show you how to diagnose, disassemble, and repair a filament jam in the AMS 2 Pro Internal Hub so you can get back to printing.
Whether your filament snapped during unloading or became lodged inside the AMS 2 Pro, this guide walks through the process of identifying the jam, safely opening the internal hub, removing the broken filament, and reassembling everything correctly.
This tutorial focuses specifically on clearing a filament jam in the AMS 2 Pro Internal Hub. If your issue is caused by a failed sensor or another hardware problem, additional troubleshooting may be required.
Official Bambu Lab Wiki: AMS 2 Pro Broken Filament Removal Internal Hub wiki.bambulab.com/en/ams-2-pro/remove-broken-stuck-material
► SHOP 3D PRINTING CANADA: https://2.ht/c
► SHOP USA STORE: https://2.ht/u
► OUR PRINTING SERVICES: https://2.ht/p
► DISCUSS ON OUR COMMUNITY FORUM: https://2.ht/s
CHAPTERS
━━━━━━━━━━━━━━━━━━━━━━━━━━━
0:00 Intro
0:39 Required Tools
0:45 Disassembly
2:43 Identify Filament Jam
2:58 Open Hub Idler Lever
3:14 Remove Broken Filament
3:52 Assembly
5:15 Bonus Tip: Rubber PTFE Button
5:48 Assembly
6:08 Finish Testing
FOLLOW US
Facebook: facebook.com/3dprintingcanada
Instagram: instagram.com/3d.printing.canada
TikTok: tiktok.com/@3dprinting.canada
Twitter: twitter.com/3dprintingcan
CREDITS
Host & Production: Matt
Production & Camera: Spencer
Editing: Martin - rast.media
MUSIC
Summer Breeze - Mizlo epidemicsound.com/music/tracks/a7830ee4-2ca5-4490-b49e-0bd1e9ee7ce2










