Wolf Ridge WoodworkingToday's project is a quick and simple miter crosscut sled. I used a couple of pieces of scrap 3/4" plywood to make it. This will simplify the mitered corners that I need for building boxes. I can align the length mark on the wood with the top of the cut in the sled for precise cuts. I can't wait to make the next box using this. Make sure you're subscribed to watch it in use!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Romans 8:15 (NIV) The Spirit you received does not make you slaves, so that you live in fear again; rather, the Spirit you received brought about your adoption to sonship. And by him we cry, “Abba, Father.”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
Shop Project: Crosscut Miter SledWolf Ridge Woodworking2021-10-29 | Today's project is a quick and simple miter crosscut sled. I used a couple of pieces of scrap 3/4" plywood to make it. This will simplify the mitered corners that I need for building boxes. I can align the length mark on the wood with the top of the cut in the sled for precise cuts. I can't wait to make the next box using this. Make sure you're subscribed to watch it in use!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Romans 8:15 (NIV) The Spirit you received does not make you slaves, so that you live in fear again; rather, the Spirit you received brought about your adoption to sonship. And by him we cry, “Abba, Father.”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #crosscutsled #mitersledWoodworking: The Record Stand that Reacts to Album Covers!Wolf Ridge Woodworking2024-01-20 | In today's video, I will show how I built a "Now Playing" record stand. It has a builtin switch that turns on the LED lights when you set a album cover on top. It's a quick weekend project for the beginner or experienced woodworker.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 119:114 (NIV) You are my refuge and my shield; I have put my hope in your word.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#DIYVinyl #RecordStandPlans #WoodworkingMagicSimple Tips to Get Better Results When Making Hybrid Pen BlanksWolf Ridge Woodworking2023-09-03 | In today's video, I show you how I make my hybrid pen blanks. If you follow the 10 steps below, you should have better results turning your hybrid pen blanks. You may wonder why you need to stabilize the material prior to casting in resin. The material such as wood or pinecones, are going to be much softer than the resin. When you go to sand the pen blank after turning, you will notice that you can feel the difference between the two materials. You will also likely feel a dip on the softer wood or pinecone. The reason is that resin is harder than wood or pinecones. When you stabilize prior to casting in resin, you make the material as hard as the resin.
1. Dry the material in a toaster oven at 200F for an hour if you feel like there is any dampness to the material. Make sure that you remove any loose material such as bark. 2. Submerge the material in Cactus Juice. Make sure that the material is completely submerged and is not above the surface of the Cactus Juice. 3. Run the vacuum pump until there are no more bubbles. 4. Turn off the vacuum pump and leave the material soaking in the Cactus Juice for the same amount of time it took to be bubble free. 5. Preheat the oven to 200F and verify the temperature with an external temperature gauge. I use a couple of old toaster ovens I got at yard sales. Don't use the oven in your kitchen unless you want your spouse mad at you. 6. Remove as much of the Cactus Juice as you can before putting it into the oven. Do not place the material directly on aluminum foil. If you do, the Cactus Juice will stick to the aluminum foil and it will be a nightmare to get off. 7. Leave the materials in the toaster oven for at least 2 hours. For thicker pieces of wood, you will need to keep it in the oven for more than two hours. The goal is to get the internal temperature of the material up to 200F to allow the Cactus Juice to cure. 8. After the Cactus Juice has cured, be sure to remain any of the cured Cactus Juice from the out side of the material. Some will come off easily and others may need to be removed with an old chisel. 9. Drain the Cactus Juice back into the original container. The Cactus Juice will have changed color, but it is still good. Store the Cactus Juice in your refrigerator and it will last longer. 10. Clean up you supplies with soapy water and dry.
If you would like to purchase pens or pen blanks, please follow the links below.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 5:12 (NIV) Surely, LORD, you bless the righteous; you surround them with your favor as with a shield.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#penblanks #hybridpenblanks #alumilite #cactusjuiceCreality Falcon2 How to easily engrave glass and powder coated tumblersWolf Ridge Woodworking2023-08-12 | In today's video, we are going to have some fun engraving on round things! This is one of the easiest rotary attachments I've used. I should not be surprised as the Creatlity Falcon2 has been one of the easiest engravers I've had the pleasure of working with.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 103:12 (NIV) as far as the east is from the west, so far has he removed our transgressions from us.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#laserengraver #crealityfaclcon2Woodworking: Making a Shoji and Kumiko Lamp Part 3 (Assembly)Wolf Ridge Woodworking2023-07-30 | In today's video, I wrap up this three part series on making a Shoji lamp. This has been a very time consuming project. The lamp turned out really well. I ended up no putting on the Shoji paper because I liked the shadows the lamp gives off without the paper. Make sure you are subscribed as I will be making a pair of smaller lamps with a different pattern and with the Shoji paper.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Isaiah 53:4-5 (NIV) Surely he took up our pain and bore our suffering, yet we considered him punished by God, stricken by him, and afflicted. But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.
➤ Shoji and Kumiko Books Shoji and Kumiko Design: Book 1 The Basics: amzn.to/3qhJbX6 Shoji and Kumiko Design: Book 2 Beyond the Basics: amzn.to/3MK3QL4 Shoji and Kumiko Design: Book 3 Hexagonal Patterns: amzn.to/3IRj5Rq Shoji and Kumiko Design: Book 4 Diamond Patterns: amzn.to/3IUg0zX The Art of Kumiko: Learn to Make Beautiful Panels by Hand: amzn.to/3Nd0Icb
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#shoji #kumiko #japanesewoodworkingCreality Falcon2: Painting Steel with a Laser Beam!Wolf Ridge Woodworking2023-06-17 | In today's video, I'm going to try out painting a steel plate. There were a lot of challenges in doing this. The main issue was that I could not find any information on the end to end process. I try to demistify the process by walking you step-by-step how you can do this too!
Download the material test settings and the Koi fish Lightburn project tinyurl.com/bdhtv5ay
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 77:11 (NIV) I will remember the deeds of the LORD; yes, I will remember your miracles of long ago.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#laserengraver #crealityfaclcon2Woodworking: Making a Shoji and Kumiko Lamp Part 2 (Making the panels)Wolf Ridge Woodworking2023-06-05 | In today's video, I'm making the Kumiko panels for the Shoji lamp. While there are many different Kumiko designs, I'm going with the Asa-No-Ha pattern. From what I've seen, it seems to be one of the more popular patterns.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
2 Corinthians 4:17 (NIV) For our light and momentary troubles are achieving for us an eternal glory that far outweighs them all.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
➤ Shoji and Kumiko Books Shoji and Kumiko Design: Book 1 The Basics: amzn.to/3qhJbX6 Shoji and Kumiko Design: Book 2 Beyond the Basics: amzn.to/3MK3QL4 Shoji and Kumiko Design: Book 3 Hexagonal Patterns: amzn.to/3IRj5Rq Shoji and Kumiko Design: Book 4 Diamond Patterns: amzn.to/3IUg0zX The Art of Kumiko: Learn to Make Beautiful Panels by Hand: amzn.to/3Nd0Icb
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#shoji #kumiko #japanesewoodworkingWoodworking: Making a Shoji and Kumiko Lamp Part 1 (Making the jigs)Wolf Ridge Woodworking2023-05-22 | In today's video, I'm building the jigs that are required to make kumiko panels. This will be a three part series where at the end, I will have made a Shoji lamp with kumko panels.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
John 3:5 (NIV) Jesus answered, “Very truly I tell you, no one can enter the kingdom of God unless they are born of water and the Spirit.
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
➤ Shoji and Kumiko Books Shoji and Kumiko Design: Book 1 The Basics: amzn.to/3qhJbX6 Shoji and Kumiko Design: Book 2 Beyond the Basics: amzn.to/3MK3QL4 Shoji and Kumiko Design: Book 3 Hexagonal Patterns: amzn.to/3IRj5Rq Shoji and Kumiko Design: Book 4 Diamond Patterns: amzn.to/3IUg0zX The Art of Kumiko: Learn to Make Beautiful Panels by Hand: amzn.to/3Nd0Icb
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#shoji #kumiko #japanesewoodworkingCreality Falcon2: 22 Watts of Power and 10 Minutes From Unboxing to Cutting!Wolf Ridge Woodworking2023-05-06 | In today's video, I'm going to review the new Creality Falcon2 22 watt laser engraver. This has to be one of the easiest laser engravers to put together. Why is it so easy? I comes pre-assembled and all you have to do is attach the laser module and screw on the feet. That's it!
To test it out, I put together a layered mountain forest wall art piece. I was blown away on how fine the detail that the laser was able to cut. This is a great little project to keep for yourself or give away!
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Revelation 4:8 (NIV) Each of the four living creatures had six wings and was covered with eyes all around, even under its wings. Day and night they never stop saying: “ ‘Holy, holy, holy is the Lord God Almighty,’who was, and is, and is to come.”
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#laserengraver #crealityfaclcon2Workshop Project: How to Make a Storage Space for Your CNC Tools and MoreWolf Ridge Woodworking2023-04-23 | In today's video, I show you how I built a cabinet to fit into my CNC stand, but it can be used on any shop cabinet. Follow the same geometry and just adjust the sizes. Check out Fix This Build That plans. To get started, I purchased Brad's lathe stand plans which you can find here: (tinyurl.com/5bk4kwsh).
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 103:2 (NIV) Praise the LORD, my soul, and forget not all his benefits
➤ Please go checkout these partners RZ Mask: tinyurl.com/5n888zzb (Use WOLFRIDGE15 for 15% Off) Ack's Abrasive & Polishing Paste: tinyurl.com/b6k5rww8 (Use WOLF15 for 15% Off) Starbond: tinyurl.com/9tnk38u7 (Use WOLF15 for 15% Off) Taytools: https://lddy.no/191nm
* Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#shopcabinet #diycabinetGreat Way To Upcycle Leftover Resin - You Have to See This DIY Carving Mallet!Wolf Ridge Woodworking2023-03-10 | In today's video, I show you a way to use leftover resin and a piece of scrap wood to make a carving mallet.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Are you looking to protect your lungs? Check out RZ Mask (rzmask.com) and don't trust your lung's safety to cheap imitation masks. Use WOLFRIDGE15 to get 15% off your next order.
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#epoxy #mallet #epoxymalletThis DIY CNC can cut wood and aluminum and it cost less than you might thinkWolf Ridge Woodworking2023-02-24 | Is it possible to get into CNC woodworking without spending over $5,000? The answer is absolutely YES! Below are a couple of links to some options that I've used. Today's video focuses on the PrintNC. It has a working area of 23" x 33" and costs around $1,000. It still uses 3d printed parts, but not at critical junctions like the MPCNC. You can also upgrade the printed parts with aluminum to produce even more rigidity.
MPCNC Information (old cnc): v1e.com PrintNC Information (new cnc): https://threedesign.store/
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#cnc #cncprojects #diycncWoodturning: Overflowing Hearts BowlWolf Ridge Woodworking2023-02-11 | In today's video I'm going to transform this log I found on the side of the road in Colorado into what I think is a pretty cool bowl. This project was inspired by Dan Preece. If you've never watched any of his videos, you should check them out. You will not be disappointed!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#resin #resinandwood #alumiliteWoodturning: Mesquite Bowl with a Hint of ResinWolf Ridge Woodworking2023-01-27 | In today's video I'm going to turn this half of a mesquite log that I got from a friend's backyard. I added a little resin to make up for the flat area of the log.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Joshua 10:25 (NIV) Joshua said to them, “Do not be afraid; do not be discouraged. Be strong and courageous. This is what the LORD will do to all the enemies you are going to fight.”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF15 at checkout to get 15% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#resin #mesquite #resinandwood #alumilite #eyecandypigmentsLaser Enclosure & Shielding Thats Safe to Use in a Closed Shop - AND a quick bonus projectWolf Ridge Woodworking2022-12-19 | One of the challenges with a laser engraver is the smoke! In today's video, I show you how I deal with that with a custom built laser enclosure built into a drawer. I also make a bonus project that you can make as a great Christmas gift.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Isaiah 49:13 (NIV) Shout for joy, you heavens; rejoice, you earth; burst into song, you mountains! For the LORD comforts his people and will have compassion on his afflicted ones.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF15 at checkout to get 15% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.How to Build a Router Sled - The Easiest Way to Flatten your slabWolf Ridge Woodworking2022-12-12 | In today's video, I show you how I built a router sled or you may call it a slab flattening sled/jig out of 80/20 aluminum extrusion. I love work with 80/20 extrusion because it goes together so easily. In my opinion, this is much better than a sled built out of wood due to wood movement. The cost to build this was less than $400. $84 of that was for the shipping. It may be cheaper for you depending on where you live. You may also be able to find the parts somewhere else for less money. I found that tnutz.com (not sponsored) was the cheapest for me.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.Ortur Laser Master 3: Great laser engraver for beginnersWolf Ridge Woodworking2022-12-06 | In today's video, I test the Ortur Laser Master 3! I also give a great tip to get better cuts and engraving.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
2 Peter 3:10 (NIV) But the day of the Lord will come like a thief. The heavens will disappear with a roar; the elements will be destroyed by fire, and the earth and everything done in it will be laid bare.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF15 at checkout to get 15% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.How to Prepare a slab for a Project: The Secret to a Smooth FinishWolf Ridge Woodworking2022-11-27 | In this video, I take you through my process of preparing a slab for a project. This consists of taking care of cracks, voids, and bark inclusions and how to flatten the slab.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #slab #liveedge #woodfurnitureHow to Make an Awesome Halloween Project with the Xtool D1!Wolf Ridge Woodworking2022-10-27 | I've been looking to upgrade my old 5 watt laser to something that can cut through some thin pieces of wood. I've been seeing a few videos pop up talking about it. I saw some ads for them on Instagram. After all that, I still didn't believe that it could cut through wood like they claimed. I thought you needed a CO2 laser to do that. Well I was wrong.....very wrong! I could not believe it cut a coaster, in the shape of my logo, out of 1/2" baltic birch. The detail was amazing! I decided to make a few of them and give two of them away. If you are interested in one of these, please leave a comment and include "Coaster". That will get you entered. I will randomly pick 2 comments on November 4th 2022. I'll make a comment and pin it to announce the winner. Please email me at eparker@wolfridgewoodworking.com and send me your address.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Romans 5:17 (NIV) For if, by the trespass of the one man, death reigned through that one man, how much more will those who receive God’s abundant provision of grace and of the gift of righteousness reign in life through the one man, Jesus Christ!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.HOW TO MAKE A MOXON VISE - The ultimate beginners guide!Wolf Ridge Woodworking2022-10-07 | In this video, I will take you through the steps I used to create my moxon vise. This is a great beginner project that uses basic woodworking concepts. I used wood that I had in my shop and you can use what you have lying around. This includes dimensional pine lumber (2"x6", 2"x8", etc) that you can get from the big box stores. I decided to make a table attached to mine, but that is optional. For the size, you can make it any size you want to fit your needs. Basically you need the width between the screws to be as wide as any project you intend to make. For the jaw thickness, I made the rear jaw just under 2" and the front jaw just under 1.5". The wider the distance bewteen the screws, the thicker the jaws need to be is the rule of thumb.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
2 Thessalonians 1:11-12 (NIV) With this in mind, we constantly pray for you, that our God may make you worthy of his calling, and that by his power he may bring to fruition your every desire for goodness and your every deed prompted by faith. We pray this so that the name of our Lord Jesus may be glorified in you, and you in him, according to the grace of our God and the Lord Jesus Christ.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #moxonvise #workbench #benchviseWoodturning: Broken Pieces & Resin BowlWolf Ridge Woodworking2022-09-22 | How could this not be fun? You get to break off chunks of wood with a hammer! I’m rally happy with how this turned out. The resin is crystal clear and you can see all the jagged edges of wood. They are mixed in with random pieces of solid wood.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodturning #resinWoodturning: Lidded Cherry Bowl with an Ebony FinialWolf Ridge Woodworking2022-07-12 | I recently received my August issue of Fine Woodworking. I typically don't see woodturning projects in there, but this month, there was a unique bowl featured. I really liked the shape and it was lidded with a finial. I've made lidded boxes before, but not too many lidded bowls. Plus it had a stunning little finial. I had this 4" cube piece of cherry that would be perfect for this project.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Hebrews 12:2 (NIV) fixing our eyes on Jesus, the pioneer and perfecter of faith. For the joy set before him he endured the cross, scorning its shame, and sat down at the right hand of the throne of God.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #liddedbowl #woodturning #bowlsWoodturning: Figured Maple Fruit BowlWolf Ridge Woodworking2022-06-25 | I've had this 12" x 12" x 2" piece of figured maple for a couple of years. I bought it green and it developed a pretty mean bow. It looked pretty plain with the wax sealer, but it turned out to have some stunning figure.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodturning #woodworkingWoodworking: Bread Cutting BoardWolf Ridge Woodworking2022-05-23 | Are you tired of cutting bread and having the crumbs go everywhere? Today's video shows how to make a bread cutting board that has a removable grate that captures the crumbs so you can throw them away.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Malachi 4:2 (NIV)Romans 5:5 (NIV) And hope does not put us to shame, because God’s love has been poured out into our hearts through the Holy Spirit, who has been given to us.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #homedecor #cuttingboardWoodworking: Maple & Resin Inlay CoastersWolf Ridge Woodworking2022-04-24 | These coasters are really quick and easy to make. They are great ways to use up scraps I know you have in your shop. You don't have to use a CNC if you have steady hands. I do not so I use my DIY CNC (MPCNC: shop.v1engineering.com/collections/parts). I'm not sponsored, but this little CNC has been great to learn on.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Chapters: 0:00 - Intro 0:10 - Milling Process 1:11 - Cutting inlay # 1 3:42 - Fill inlay with resin 5:07 - Cutting inlay # 2 6:35 - Cutting out the coasters 9:32 - Sanding & finishing 11:30 - Applying a finish 12:04 - Cork backing 12:28 - Wrap up
Ecclesiastes 3:14 (NIV) I know that everything God does will endure forever; nothing can be added to it and nothing taken from it. God does it so that people will fear him.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #homedecor #coastersWoodworking: Hexagon BoxWolf Ridge Woodworking2022-04-10 | I recently saw a video by Winston Moy (youtube.com/watch?v=zZBznQibt6o&t=202s) where he made a hexagon box with an aluminum bottom and aluminum honeycomb. I thought it was such an amazing idea. My lathe is still down so I can't turn a box. I might as well try making a hexagon box!
If you want to pick up some aluminum honeycomb, reach out to Zac at Resin Werks Studio (bit.ly/3jpVtG8).
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #homedecor #aluminumhoneycombWoodworking: Woodoworking MalletWolf Ridge Woodworking2022-03-27 | Today's project shows how I made two joiners mallets or some people call them woodworking mallet. Either way you call them, they are super simple to make!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Rules for winning one of these mallets: - Make sure you are are subscribed - Leave a comment with the words "Hammer Time" and which one you want (padauk/maple or walnut/maple) - I will randomly pick from the comments and reach out to you for you shipping details (shipping paid by me) - The winner will be picked on 04/08/2022 - If the winner does not respond within a week, I will choose another random winner
Hosea 6:1-2 (NIV) Come, let us return to the LORD. He has torn us to pieces but he will heal us; he has injured us but he will bind up our wounds. After two days he will revive us; on the third day he will restore us, that we may live in his presence.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #mallet #hammerWoodworking: Ash End Grain Cutting BoardWolf Ridge Woodworking2022-03-13 | Making an end grain is no more challenging than a regular one. It just takes a little longer due to the double glue up. One of the advantages of this kind of cutting board is that it's easier on your knives.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Malachi 4:2 (NIV) But for you who revere my name, the sun of righteousness will rise with healing in its rays. And you will go out and frolic like well-fed calves.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #homedecor #cuttingboardWoodworking: A Wenge Mountain ShelfWolf Ridge Woodworking2022-02-25 | Today's video shows how to make a mountain shelf. Mountain shelves can be used to hold essential oils, knickknacks, or just about anything. I made this one out of Wenge and it is 30" wide, 18" tall, and 3" deep. While I made this one out of Wenge, you can you just about any wood including pine from the big box stores.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
CHAPTERS: 0:00 - Intro 0:21 - Breaking down the stock 2:38 - Cutting the components 5:18 - Sanding before assembly 5:36 - Glue up 7:59 - Applying the finish 10:13 - The finished project
Hebrews 11:1 (NIV) Now faith is confidence in what we hope for and assurance about what we do not see.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #homedecor #mountainshelfWoodturning: A Basket Illusion VaseWolf Ridge Woodworking2022-02-05 | It's been a while since I've done a turning video and I figured it was time to dust off the lathe. I was trying to figure out what to make and I kept seeing posts by Soco Joco on Instagram of his amazing basket illusion hollow forms and platters. I have been admiring his work for a long time now. If you haven't seen them, you should really check them out. Well I thought it was time to finally stop saying that I was going make a basket illusion and just do it. So that's what I did.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodturning #basketillusionWoodworking: Curly Maple & Lacewood Tea BoxWolf Ridge Woodworking2022-01-21 | I have a mess in my pantry! I have so many different teas and they are all over the place. It's time to get some organization going. To start, let's make a tea box to store the tea bags.
I was recently in the big box store and came across this piece of maple. I don't typically get hard wood from them, but this particular piece caught my eye. Even without finish this piece had so much visible curl that I couldn't pass it up. I bought the whole piece.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #teabox #curlymapleWoodworking: Custom River Headboard Part 2 of 2Wolf Ridge Woodworking2022-01-07 | In this video I show how I finished the river headboard for my son's bed. I used India Ink to add some contrast to the natural finish of the slab. Each side of the slab has three tenons. Two of the tenons are wood and one is resin. To account for wood movement, I only used epoxy on the resin tenon. The headboard is attached to the bed frame with two bolts in each post.
Ezekiel 11:19 (NIV) I will give them an undivided heart and put a new spirit in them; I will remove from them their heart of stone and give them a heart of flesh.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #resinandwoodWoodworking: Wood and Resin Christmas TreeWolf Ridge Woodworking2021-12-17 | Are you like me and have a bunch of small scraps? Well today's project is a good one for you! Recently I came across a blog post where they take shims and resin to make the trees. You can find it here (bit.ly/3qmvjaH). I had all these scraps laying around so I figure I'd use them instead.
In the video, I make two different size trees. The larger one is 8.5" tall and 4" wide. The small one is 7" tall and 4" wide.
Isaiah 9:6 (NIV) For to us a child is born, to us a son is given, and the government will be on his shoulders. And he will be called Wonderful Counselor, Mighty God, Everlasting Father, Prince of Peace.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #resinandwood #christmastreeWoodworking: Custom River Headboard Part 1 of 2Wolf Ridge Woodworking2021-11-26 | Today's project shows how a take a slab of unknown wood (maybe olive) and start to turn it into a headboard.
This project has been a long time coming if you ask my son. I purchased this slab a couple of years ago and it's just been sitting there while other projects have came and went. Jokes started coming that he will get his bed when he goes off to college. Well, I thought it was time to finally build this headboard.
Due to the amount of time if is taking to make the bed, I'm going to split it into two parts. This part will show making the river part of the headboard. In the next part, I will finish the headboard by making the posts and attaching the metal rails.
If you're in the Phoenix area and need lumber or a place to flatten larger projects, go check out Timber Hardwoods. They are located at 935 E Southern Ave, Mesa. I'm not sponsored by them, but I do recommend them. I get all my wood from them.
Isaiah 12:4 (NIV) In that day you will say: “Give praise to the LORD, proclaim his name; make known among the nations what he has done, and proclaim that his name is exalted.”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #resinandwoodWoodworking: Burl & Resin Candle Holder (For Sale)Wolf Ridge Woodworking2021-11-06 | Today's project is inspired by a recent Google search and a bunch of scrap burl cutoffs. I'm always looking for something new and exciting to make. I ran across these burl and resin tea light candle holders. I thought they looked amazing and would make great gifts. They are super easy to make!
John 16:33 (NIV) “I have told you these things, so that in me you may have peace. In this world you will have trouble. But take heart! I have overcome the world.”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #resinandwood #tealightWoodturning: Fall Themed Resin & Maple Burl PlatterWolf Ridge Woodworking2021-10-22 | Today's project is a 10" resin and maple burl platter. I have a love/hate relationship with resin turning, but you can't argue with how amazing they look. This one is no exception! It will definitely become part of my wife's annual fall decor. I'll still be cleaning up the resin ribbons next fall too. Seriously....this stuff goes everywhere.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodturning #resin #woodandresinplatterShop Project: Wire Burning ToolWolf Ridge Woodworking2021-10-15 | My current wire burning tool was well past its lifetime so it was time to replace it. This is such a quick and easy project. It literally took me less than an hour to make. The great thing about this is you can easily change out the wire when it's used up or if you want a larger or smaller burn line.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 8:3-4 (NIV) When I consider your heavens, the work of your fingers, the moon and the stars, which you have set in place, what is mankind that you are mindful of them, human beings that you care for them?
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #slidinglidbox #sapeleWoodworking: How to make a sliding lid boxWolf Ridge Woodworking2021-10-08 | This quick and simple wood box is great for the beginner and pro. They make great pencil, wine, and other gift boxes. You can use just about any wood from scrap wood to exotic woods to make this.
I'm wanting to dive into more than just turning bowls and such. I want to make keepsake boxes and maybe even a humidor. Heck, a lot of furniture is just bigger boxes aren't they?
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Romans 14:17-19 (NIV) For the kingdom of God is not a matter of eating and drinking, but of righteousness, peace and joy in the Holy Spirit, because anyone who serves Christ in this way is pleasing to God and receives human approval. Let us therefore make every effort to do what leads to peace and to mutual edification.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#woodworking #slidinglidbox #sapeleWoodturning: Olive & Resin ClockWolf Ridge Woodworking2021-09-24 | This is a quick and easy project that makes a perfect gift! Outside of waiting for the epoxy to cure, it only took me a little over an hour to make this clock.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Lamentations 3:25-26 (NIV) The LORD is good to those whose hope is in him, to the one who seeks him; it is good to wait quietly for the salvation of the LORD.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#resinclock #resin #resinandwood #alumiliteWoodturning: Maple and Fake Recycled Skateboard BowlWolf Ridge Woodworking2021-09-10 | I've seen a few people upcycle skateboards and make some amazing projects. I had the idea to sandwich a colorful skateboard between two pieces of maple. The only problem is.....I didn't have any skateboards. I always like to experiment so I accepted the challenge. Instead of upcycling a skateboard, I wanted to recreate the look by pouring thin layers of colored resin. Some of the layers got a little thick, but I'm still very happy with how they turned out.
It took me a minute to decide on the shape of the bowl because I wanted the colors to be the start of the show!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 127:1 (NIV) Unless the LORD builds the house, the builders labor in vain. Unless the LORD watches over the city, the guards stand watch in vain.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#recycledskateboard #resin #resinandwoodShop Project: Dust Collector Upgrade to Boost PerformanceWolf Ridge Woodworking2021-08-27 | This one upgrade can make one of the biggest impact in the performance of your dust collector. Adding a separator to your dust collector with help, but it robs suction at the same time. By removing the filter bag and adding a canister filter, you get back the suction.
You might be asking how can a canister filter be that much better than the filter bag. It's all about surface area. The surface of the bag has these tiny holes that allows air to escape. The filter bag only has a small surface area which means a smaller number of holes for the air to escape. The canister filter is made up of a pleated filter. If you were to take apart the filter, you would see just how long the filter material is. This means you can have a lot more holes for the air to escape. So to summarize, the more air that escapes, leaving behind dust and debris, the more suction you will have.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Zechariah 2:11 (NIV) Many nations will be joined with the LORD in that day and will become my people. I will live among you and you will know that the LORD Almighty has sent me to you.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
#DustCollector #Upgrade #CanisterFilterWoodturning: Using Milk Paint to Make a Lidded Walnut Bowl Pop!Wolf Ridge Woodworking2021-08-13 | Over the last 3 years, I've made bowls, lidded boxes, and hollow forms, but never a lidded bowl. I like experimenting in my shop so I wanted to try making a lidded bowl. If that wasn't experimentation enough, I wanted to paint perfectly good wood. Now I know that's going to upset some people, but I really like the contrast between the rich dark walnut and the blue paint. I think it turned out pretty well, but I'm biased. Please let me know down in the comments what you think.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Habakkuk 3:17-18 (NIV) Though the fig tree does not bud and there are no grapes on the vines, though the olive crop fails and the fields produce no food, though there are no sheep in the pen and no cattle in the stalls, yet I will rejoice in the LORD, I will be joyful in God my Savior.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
#woodturning #woodworkingWoodworking: Steady Rest version 2.0Wolf Ridge Woodworking2021-07-30 | After using the original version of this steady rest, there were a few things that I needed to change. It is much improved now and I've updated the plans too. You can find them on my website.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Isaiah 53:4-5 (NIV) Surely he took up our pain and bore our suffering, yet we considered him punished by God, stricken by him, and afflicted. But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
Ed Parker P.O Box 1893 Queen Creek, AZ 85142Woodturning: A mesquite bowl with cracks and bug holesWolf Ridge Woodworking2021-07-02 | What do you do when you have a beautiful piece of wood, but it's got cracks and bug holes in it? In today's video, I show you one of the many ways to turn those challenges into features.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Isaiah 61:1 (NIV) The Spirit of the Sovereign LORD is on me, because the LORD has anointed me to proclaim good news to the poor. He has sent me to bind up the brokenhearted, to proclaim freedom for the captives and release from darkness for the prisoners,
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
#mesquite #woodbowlWoodturning: A Plywood & Resin Hollow Form Lidded BoxWolf Ridge Woodworking2021-06-18 | I have been kicking around this idea for a long time now. I recently created a prototype/proof of concept by making a bowl using plywood and resin. That gave me the confidence to actually pull this off. I'm really happy with how it turned out!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
#resinart #resin #resinandwoodWoodworking: How to Make a Steady RestWolf Ridge Woodworking2021-05-28 | I have been wanting to build a steady rest for a while now. I had tried before, but it just never worked out. Now that I have my CNC, I felt it would be easier to design it in VCarve and let the CNC do the hard work. I'm really happy with how it turned out and I look forward to using it.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Ed Parker P.O Box 1893 Queen Creek, AZ 85142Woodturning: Plywood & Resin BowlWolf Ridge Woodworking2021-05-14 | I have an idea for a bigger project, but I wasn't sure it would work or not. I want to make a hollow form box out of plywood and resin. Why plywood? The lines of good Baltic Birch versus the stuff you get at the big box stores is pretty cool. Before I spent the time making that project, I wanted to try something smaller. A bowl was a perfect project. I think this bowl turned out great and was perfect to test out the process.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
#resin #resinandwood #plywoodbowlWoodturning: How to make your own carbide toolsWolf Ridge Woodworking2021-04-30 | In today's video, I will show you all the steps from start to finish to make your own carbide tools. I currently have the Easy Wood Tools Mid Size tools, but I've found that in certain projects, the tool chatters due to the smaller bar size (3/8"). I wanted to see if I could make my own using parts available online. I was able to pickup all the parts from Amazon.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Ed Parker P.O Box 1893 Queen Creek, AZ 85142Woodturning: Painted Cherry BowlWolf Ridge Woodworking2021-04-16 | I wanted to do little expirementing with contrasting colors. I had a large cherry blank that is 4" deep, but not wide enough for a salad bowl. So a fruit bowl it is! I had some Blue Moon milk paint and I wanted to see how the contrasting colors would look. I think it came out great. What do you think?
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Ed Parker P.O Box 1893 Queen Creek, AZ 85142Woodturning: Olive Wood & Resin BowlWolf Ridge Woodworking2021-04-02 | This piece of olive wood came from a neighbor's yard. It was dry when he gave it to me, but wasn't sealed so it contained a lot of significant cracks. It's been sitting on my self for over a year. I felt it was time to do something with it so I broke out the electric chainsaw and cut that baby in half. Wow was I surprised to see how beautiful the grain was inside.
With all of the cracks and how uneven the outside of the log was, I needed some resin to finish the bowl. I went with Alumilite Clear Slow Set and some sapphire blue pigment powder. I thought the blue with the wood grain would go great together. You know what, it totally did!
My wife named it "The Mediterranean Bowl" due to it looking like and ocean and land. Plus most olives come from Europe so it all made sense. I wasn't able to film my ending in the shop due to a swarm of bees looking for a new home. Thankfully, they only stayed a couple of days and moved on.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Matthew 20:18-19 (NIV) “We are going up to Jerusalem, and the Son of Man will be delivered over to the chief priests and the teachers of the law. They will condemn him to death and will hand him over to the Gentiles to be mocked and flogged and crucified. On the third day he will be raised to life!”
Ack's Abrasive & Polishing Paste ackswoodpaste.com Use WOLF10 at checkout to get 10% off your order
* Some links may be affiliate or sponsor links. Purchasing or even clicking through these links will help support me and the content I provide for free. Thank you very much for your support!