Uploaded March 2025 | Updated November 2026, 3 hours ago
This video should tell you everything you need to know (and more) about AM32 firmware ESCs and how to use them in your combat robot or other awesome projects. This video focuses on tuning AM32 settings for your particular brushless motor and use case, as well as showing how to wire motors to ESCs and the ESCs to the rest of your power system and receiver. I explain what all the different settings do, which are best to use for drive systems or to power spinning weapons.
Support Just 'Cuz Robotics!
Patreon: patreon.com/user?u=63305349
Buy Just 'Cuz ESCs shown: justcuzrobotics.com/search?q=am32&options%5Bprefix%5D=last
Buy on Amazon using my affiliate links: amzn.to/4hxceuE
IMPORTANT LINKS
AM32 confusingly has several github repos, and several config tools. Fortunately, for most people you really only need to worry about the first ones linked here.
AM32 Latest Stable Firmware Github: github.com/am32-firmware/AM32/releases
AM32 Web Config Tool: am32.ca
If you cannot get the USB programmer to work or show up as a COM device you probably need CH340 drivers.
CH340 Driver Install: learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all
Chris Rosser has a fantastic video going into more detail on all AM32 settings here: youtube.com/watch?v=VCIpMOESqmw
The desktop client Config Tool V1.82 (or any version older than 2.0) works for AM32 Version 1.xx and 2.xx but NOT experimental 3.xx. The am32.ca site should also work for V1.xx and V2.xx but sadly NOT V3.xx. The experimental firmware is required for CRSF communication support.
Desktop/Offline Config Tool - under Tools here am32.ca/downloads
^ Windows and Linux compatible
If you want to mess with newer V3.xx at time of writing (3/11/2025) you must use the Experimental AM32 and download the Windows Config Tool V2.01 or later. Web client doesn't work.
AM32 Experimental Github: github.com/AlkaMotors/Am32-Experimental
For older versions than 2.0:
AM32 V1.99 and older Github github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware
HEX firmware files for Just 'Cuz Robotics ESCs are typically linked on the store pages. Web client should grab the latest for you when you select 'flash'.
How To Flash BlHeli32 ESC with AM32: oscarliang.com/flash-am32-blheli32-esc
Requires additional hardware such as an STLink V2: amzn.to/3FpfxXH
Rock Crawler video from Valley Crawlers: youtube.com/watch?v=9NbK8U_XMW4
_____________________________
Just 'Cuz Robotics Website: justcuzrobotics.com
Just 'Cuz Store: justcuzrobotics.com/shop
Support on Patreon! bit.ly/JCRPatreon
Try PCBWay's CNC Machining or PCB Fab using this link for a $5 new user credit: bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
Bloodsport Youtube Channel
youtube.com/c/bnsrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
Bloodsport/BnS Facebook Page:
facebook.com/bnsrobotics
#combatrobotics #am32 #fpvdrone
Timestamps/Chapters
00:00 - What is AM32
00:54 - Advantages of AM32
02:52 - Check the Date!
03:44 - BlHeli No More
04:50 - Support More Content
05:39 - AM32 ESCs Out of the Box
08:36 - Wiring your Bot with Brushless ESCs
11:05 - Diagnosing Issues / Beep Codes
12:19 - Calibration Throttle
12:55 - Arming
14:20 - Programming - USB A Programmer
17:06 - Programming - RevvitRC USB-C Programmer
18:47 - Programming - All Settings!
19:20 - 3D Mode
20:56 - Reversed (Reverse Rotation)
21:37 - Servo Settings/Inputs
22:23 - Complimentary PWM = Braking override
22:52 - Variable PWM
23:18 - Stall and Stuck Rotor
24:24 - Temp Limit
24:55 - Current Limit
26:27 - Low Voltage Cutoff
27:12 - Motor Sliders
29:08 - Disable Sinusoidal for Robots
29:33 - Braking
31:23 - Flashing/Update Firmware
33:07 - Download/Save and Apply
33:56 - Tunes
34:19 - Desktop Client
34:56 - Experimental
35:47 - Wrap Up
This video should tell you everything you need to know (and more) about AM32 firmware ESCs and how to use them in your combat robot or other awesome projects. This video focuses on tuning AM32 settings for your particular brushless motor and use case, as well as showing how to wire motors to ESCs and the ESCs to the rest of your power system and receiver. I explain what all the different settings do, which are best to use for drive systems or to power spinning weapons.
Support Just 'Cuz Robotics!
Patreon: patreon.com/user?u=63305349
Buy Just 'Cuz ESCs shown: justcuzrobotics.com/search?q=am32&options%5Bprefix%5D=last
Buy on Amazon using my affiliate links: amzn.to/4hxceuE
IMPORTANT LINKS
AM32 confusingly has several github repos, and several config tools. Fortunately, for most people you really only need to worry about the first ones linked here.
AM32 Latest Stable Firmware Github: github.com/am32-firmware/AM32/releases
AM32 Web Config Tool: am32.ca
If you cannot get the USB programmer to work or show up as a COM device you probably need CH340 drivers.
CH340 Driver Install: learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all
Chris Rosser has a fantastic video going into more detail on all AM32 settings here: youtube.com/watch?v=VCIpMOESqmw
The desktop client Config Tool V1.82 (or any version older than 2.0) works for AM32 Version 1.xx and 2.xx but NOT experimental 3.xx. The am32.ca site should also work for V1.xx and V2.xx but sadly NOT V3.xx. The experimental firmware is required for CRSF communication support.
Desktop/Offline Config Tool - under Tools here am32.ca/downloads
^ Windows and Linux compatible
If you want to mess with newer V3.xx at time of writing (3/11/2025) you must use the Experimental AM32 and download the Windows Config Tool V2.01 or later. Web client doesn't work.
AM32 Experimental Github: github.com/AlkaMotors/Am32-Experimental
For older versions than 2.0:
AM32 V1.99 and older Github github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware
HEX firmware files for Just 'Cuz Robotics ESCs are typically linked on the store pages. Web client should grab the latest for you when you select 'flash'.
How To Flash BlHeli32 ESC with AM32: oscarliang.com/flash-am32-blheli32-esc
Requires additional hardware such as an STLink V2: amzn.to/3FpfxXH
Rock Crawler video from Valley Crawlers: youtube.com/watch?v=9NbK8U_XMW4
_____________________________
Just 'Cuz Robotics Website: justcuzrobotics.com
Just 'Cuz Store: justcuzrobotics.com/shop
Support on Patreon! bit.ly/JCRPatreon
Try PCBWay's CNC Machining or PCB Fab using this link for a $5 new user credit: bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
Bloodsport Youtube Channel
youtube.com/c/bnsrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
Bloodsport/BnS Facebook Page:
facebook.com/bnsrobotics
#combatrobotics #am32 #fpvdrone
Timestamps/Chapters
00:00 - What is AM32
00:54 - Advantages of AM32
02:52 - Check the Date!
03:44 - BlHeli No More
04:50 - Support More Content
05:39 - AM32 ESCs Out of the Box
08:36 - Wiring your Bot with Brushless ESCs
11:05 - Diagnosing Issues / Beep Codes
12:19 - Calibration Throttle
12:55 - Arming
14:20 - Programming - USB A Programmer
17:06 - Programming - RevvitRC USB-C Programmer
18:47 - Programming - All Settings!
19:20 - 3D Mode
20:56 - Reversed (Reverse Rotation)
21:37 - Servo Settings/Inputs
22:23 - Complimentary PWM = Braking override
22:52 - Variable PWM
23:18 - Stall and Stuck Rotor
24:24 - Temp Limit
24:55 - Current Limit
26:27 - Low Voltage Cutoff
27:12 - Motor Sliders
29:08 - Disable Sinusoidal for Robots
29:33 - Braking
31:23 - Flashing/Update Firmware
33:07 - Download/Save and Apply
33:56 - Tunes
34:19 - Desktop Client
34:56 - Experimental
35:47 - Wrap Up
![Division Destroys the Arena at MassDestruction! [Recap Jan 25th 2025]
Division takes on friends and foes at the MassDestruction event, held on January 25th 2025! With a lot to prove after a disappointing outing in October of 24, will Division get some redemption at MassD?
Thanks to PCBWay for their ongoing support! Check them out: https://bit.ly/PCBWayJustCuz
See all Just Cuz fights NOW on Patreon: https://www.patreon.com/user?u=63305349
Papasian Interview: https://youtu.be/pm8bkP6EJNg
MassDestruction 4 Saturday, August 23, 2025 https://www.robotcombatevents.com/events/4983
Signups open July 12th - August 20th but will fill fast!
Thumbnail photo credit to JCRB Photography
Just Cuz Robotics Website: https://justcuzrobotics.com/
Just Cuz Store: https://justcuzrobotics.com/shop
Support on Patreon! https://bit.ly/JCRPatreon
Try PCBWays CNC Machining or PCB Fab using this link for a $5 new user credit: https://bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
https://www.instagram.com/justcuzrobotics/
Bloodsport Youtube Channel
https://www.youtube.com/c/bnsrobotics/
@bloodsport_battlebot
https://www.instagram.com/bloodsport_battlebot
Bloodsport/BnS Facebook Page:
https://www.facebook.com/bnsrobotics/
#combatrobotics #beetleweight
00:00 - Lets Go!
01:01 - Intro for Video
01:54 - About Me
03:14 - About the Event
05:04 - Changes?
05:59 - First Opponent- Hat Trick
06:44 - Fight 1 - Hat Trick
08:20 - What Went Wrong?
09:47 - Opponent 2 - Mako
11:02 - Fight 2 - Mako
14:16 - The Damage
16:42 - Closeups
17:13 - Opponent 3: Master Control Bot
18:40 - Fight 3 - MCB
21:59 - Judges Decision
23:43 - SPONSOR - PCBWAY
24:25 - Division got an Award?
24:53 - Final thoughts Division Destroys the Arena at MassDestruction! [Recap Jan 25th 2025]](https://i.ytimg.com/vi/jgMOA903mqU/mqdefault.jpg)




![Subtraction V2: Lets Get Metal [3 Pound Combat Robot]
Time to get metal with Subtraction V2 featuring a solid billet aluminum frame and the same amazingly powerful weapon and drive as before.
Thanks again to PCBWay for making the chassis! Check them out here: https://bit.ly/PCBWayJustCuz
Just Cuz Robotics Website: https://justcuzrobotics.com/
Just Cuz Store: https://justcuzrobotics.com/shop
Support on Patreon! https://bit.ly/JCRPatreon
Try PCBWays CNC Machining or PCB Fab using this link for a $5 new user credit: https://bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
https://www.instagram.com/justcuzrobotics/
Bloodsport Youtube Channel
https://www.youtube.com/c/bnsrobotics/
@bloodsport_battlebot
https://www.instagram.com/bloodsport_battlebot
Bloodsport/BnS Facebook Page:
https://www.facebook.com/bnsrobotics/
#CombatRobotics #beetleweight Subtraction V2: Lets Get Metal [3 Pound Combat Robot]](https://i.ytimg.com/vi/liU7dNvU6Oc/mqdefault.jpg)

![Division V3: Roofshot Time! Norwalk Havoc April 2022 (3lb Beetleweight Combat Bot) [Part 2]
Division went on a tear at the April 2022 Norwalk Havoc Event. Take a look at the last 4 fights at the competition and how Divisions run ended against the eventual tournament winner Lynx!
Division is a 3lb Combat Robot featuring a gigantic vertical spinner capable of delivering hits with the energy of a handgun bullet. For more info on the robot check out my Overview video: https://youtu.be/KC8khRVT2-4
Purchase the CAD and view the Bill of Materials for Division V3.1 here: https://bit.ly/DivV31CAD
APRIL 2022 NHRL RECAP PART 1: https://youtu.be/HaUE3IxY-tc
MARCH 2022 NHRL RECAP: https://youtu.be/27Rf6vWyYYk
Just Cuz Robotics Website: https://justcuzrobotics.com/
Just Cuz Store: https://justcuzrobotics.com/shop
Try PCBWays CNC Machining or PCB Fab using this link for a $5 new user credit: https://bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
https://www.instagram.com/justcuzrobotics/
@bloodsport_battlebot
https://www.instagram.com/bloodsport_battlebot
@retrograde_battlebot
https://www.instagram.com/retrograde_battlebot/
Bloodsport/BnS Facebook Page:
https://www.facebook.com/bnsrobotics/
Music by Karl Casey @ White Bat Audio
#CombatRobotics #Beetleweight
Chapters
00:00 Cold Open
00:43 Intro
00:59 Fight 4
04:11 Fight 4 Commentary
05:46 Fight 4 Interview
06:49 Fight 4 Damage
07:40 Fight 5?
08:06 Opponent 6
08:55 Fight 6
10:16 Fight 6 Slomo
11:04 Fight 7
17:03 Fight 7 Commentary
18:32 Marker 2
19:42 Marker 1
19:42 Marker 1
20:32 Fight 7 Interview
21:49 Opponent 8 - Lynx
22:32 LYNX! Fight 8
23:46 Lynx Fight Replay
24:41 My Interview
26:14 Fight 8 Commentary
27:01 Fight 8 Damage
27:48 Fight 8 Interview
28:44 Trophies!
29:19 Why Wheels Go Bye Bye
30:39 Drive Wheel Mount Breakdown
32:18 Whats Next? Division V3: Roofshot Time! Norwalk Havoc April 2022 (3lb Beetleweight Combat Bot) [Part 2]](https://i.ytimg.com/vi/mPv4VpOCP58/mqdefault.jpg)


