Uploaded March 2013 | Updated November 2026, 3 hours ago
This test is part of a comparison between robotic and CNC machining. The spindle was attached on both an IRB 1600 industrial robot and a Mazak CNC. In both tests, the machining forces were measured using a dynamometric table. In the case of the robot, forces and moments were also measured using an ATI force/torque sensor. In addition, the displacement of the spindle with respect to the workpiece were measured using an optical CMM (Creaform's C-Track).
This test is part of a comparison between robotic and CNC machining. The spindle was attached on both an IRB 1600 industrial robot and a Mazak CNC. In both tests, the machining forces were measured using a dynamometric table. In the case of the robot, forces and moments were also measured using an ATI force/torque sensor. In addition, the displacement of the spindle with respect to the workpiece were measured using an optical CMM (Creaform's C-Track).
