byte sized engineering | All That Work Just For This? - CO2 Laser Cutter Part 5 @bytesizedengineering | Uploaded July 2022 | Updated October 2024, 5 hours ago.
The video series continues where I'm building my own DIY CO2 laser cutter. I started out by replacing the V wheel assemblies with some more substantial linear rail. Then I installed some drag chain and routing the wires and air assist tube. With that done I started wiring up all the motor drivers and laser controller. With everything wired up I installed the mirror mounts and lens and spent quite a bit of time aligning everything. Finally with all that work done I was able to actually cut something out on my laser cutter!
New videos are uploaded whenever I finish the project!
For 15% off your Send Cut Send purchase visit bit.ly/SendCutSendByteSized
Use these free spool rack design files if you need something to try out the Send Cut Send service. bytesizedengineering.com/store/spoolrack
If you're like me you have creative ideas that are trapped inside your mind. Byte Sized Engineering videos will give you the knowledge, inspiration, and confidence to make your creative ideas a reality. You are more capable than you think, and I want to help you unleash your inner maker!
You shouldn’t need an engineering degree to make your ideas a reality. I suffered through years of engineering school so you don’t have to. I know how it feels to want to make something I’m excited and passionate about, but also feel overwhelmed by not knowing where to start. I’ve unlocked the secret to getting past this feeling of being stuck. In my videos I show you how to take complex problems and break them down into smaller, more manageable “byte sized” pieces.
If you want my recommendation on what you should watch, I put together this playlist for you. youtube.com/playlist?list=PL8Udln1nmXVBEdorJ2xU5VnXn1nfmMM--
You should also subscribe to byte sized, and consider become a supporting member through Patreon or YouTube memberships. Supporting members get access to behind the scenes content, free project build guides, discord community server, early release videos, and monthly hangouts. Thanks for taking the time to watch this video, I look forward to seeing you next time!
Subscribe: youtube.com/bytesized?sub_confirmation=1
Instagram: instagram.com/bytesizedzach
YouTube Memberships: youtube.com/channel/UCtVgFluK-MmGpQoE7VCxa6w/join
Patreon: patreon.com/bytesized
Byte sized merchandise: teespring.com/stores/byte-sized
If you're interested in what tools I use for byte sized projects, please visit:
bytesizedengineering.com/tools
The video series continues where I'm building my own DIY CO2 laser cutter. I started out by replacing the V wheel assemblies with some more substantial linear rail. Then I installed some drag chain and routing the wires and air assist tube. With that done I started wiring up all the motor drivers and laser controller. With everything wired up I installed the mirror mounts and lens and spent quite a bit of time aligning everything. Finally with all that work done I was able to actually cut something out on my laser cutter!
New videos are uploaded whenever I finish the project!
For 15% off your Send Cut Send purchase visit bit.ly/SendCutSendByteSized
Use these free spool rack design files if you need something to try out the Send Cut Send service. bytesizedengineering.com/store/spoolrack
If you're like me you have creative ideas that are trapped inside your mind. Byte Sized Engineering videos will give you the knowledge, inspiration, and confidence to make your creative ideas a reality. You are more capable than you think, and I want to help you unleash your inner maker!
You shouldn’t need an engineering degree to make your ideas a reality. I suffered through years of engineering school so you don’t have to. I know how it feels to want to make something I’m excited and passionate about, but also feel overwhelmed by not knowing where to start. I’ve unlocked the secret to getting past this feeling of being stuck. In my videos I show you how to take complex problems and break them down into smaller, more manageable “byte sized” pieces.
If you want my recommendation on what you should watch, I put together this playlist for you. youtube.com/playlist?list=PL8Udln1nmXVBEdorJ2xU5VnXn1nfmMM--
You should also subscribe to byte sized, and consider become a supporting member through Patreon or YouTube memberships. Supporting members get access to behind the scenes content, free project build guides, discord community server, early release videos, and monthly hangouts. Thanks for taking the time to watch this video, I look forward to seeing you next time!
Subscribe: youtube.com/bytesized?sub_confirmation=1
Instagram: instagram.com/bytesizedzach
YouTube Memberships: youtube.com/channel/UCtVgFluK-MmGpQoE7VCxa6w/join
Patreon: patreon.com/bytesized
Byte sized merchandise: teespring.com/stores/byte-sized
If you're interested in what tools I use for byte sized projects, please visit:
bytesizedengineering.com/tools
