Uploaded February 2020 | Updated November 2026, 3 hours ago
In this video, we'll go over the budget offering from AKG, the professional recording microphone AKG P120.
If you’re interested in purchasing AKG P120, you can do so here with a great price: imp.i114863.net/DoOkq
This AKG studio microphone comes at around $100 (or around £70/€80). Being a rather cheap recording microphone it doesn't cut too many corners.
The build quality is solid as the body of the AKG mic is solid metal with a nice modern finish, coming in black with a minimal and simple design. On the microphone body itself, you will also find the only two physical switches: one for low cutoff filter and one for -20dB.
At the bottom of the AKG Perception 120 microphone, you will find the XLR output and when it comes to the physical aspects of the microphone, that is pretty much it.
AKG has focused on what's important in an affordable self-recording microphone, and that is the audio quality.
The P120 self recording microphone is advertised to be an all-around recording microphone and it delivers. It can be used for a professional recording setting, podcasts, voiceover and anything you might need from an all-around microphone.
It might not be the best condenser microphone for any specific task in hand, but what it has going for it is the versatility it can deliver.
Being a cheap condenser microphone it shines in its ability to deliver clear audio that most entry-level to intermediate level users will be satisfied with.
Combined with a pop filter and some post-processing treatment it delivers a professional quality that no one would blink an eye to. But how so?
AKG achieves this by combining an impressive set of specifications.
The P120 has an audio frequency bandwidth of 20Hz to 20000Hz, the equivalent noise level of 19dB-A, the sensitivity of 24mV/Pa and signal noise of 75dB-A just to mention a few.
Also, coming at around 44 to 52 V voltage and a current of less than or equal to 3mA, the P120 is a microphone you can run on USB-based audio interfaces, not worrying about losing performance and minimising the amount of equipment needed for a clean and professional sounding recording.
This leads to a competent condenser microphone. To optimise the performance of the P120 the microphone placement and some sound dampening equipment can greatly aid in achieving the best audio quality.
As mentioned previously, the AKG P120 is marketed as an all-around microphone and when it comes to commercial recording, with the proper setup it can easily achieve usable recordings and when it comes to more technical types of recording, such as foley the added features of the microphone can greatly aid:
The -20 dB pre-attenuation pad and the 300Hz - 6dB/octave bass-cut filter can cut down on time and difficulty when it comes to capturing the essence of a sound and makes the process of designing that much easier.
The dimensions coming at around - length: 165mm, diameter 54mm and the net weight at around 455g makes the AKG P120 condenser microphone a nice fit for a travelling microphone, as the microphone, the required XLR cables and even an audio interface can easily fit in a backpack making it easy to travel from studio to studio if that's the workflow you prefer.
The AKG condenser mics are known for their quality and availability, as AKG produces both mid and high-end microphones, you can trust that the product quality will be up to par.
The AKG 120 stands at the start of the lineup, followed by 220 and 420 series, all under the Perception lineup.
So if you're in the market for microphone recording or looking for a decent condenser recording microphone for the right price, the AKG Perception P120 is a choice like no other, covering most basis with the correct condenser microphone placement, delivering quality that most user will need and will be satisfied by.
Overall, the P120 is a very forgiving microphone with an amazing build quality making it an amazing choice for anyone looking into getting an intermediate-level microphone or a sturdy option for a travel microphone that can still achieve professional-quality recordings as the metal build makes it durable and it should last for years.
We hope you enjoy this AKG P120 review. If you have any thoughts or suggestions, please leave them in the comment section below, like and subscribe.
#consordini #akg #microphone
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
In this video, we'll go over the budget offering from AKG, the professional recording microphone AKG P120.
If you’re interested in purchasing AKG P120, you can do so here with a great price: imp.i114863.net/DoOkq
This AKG studio microphone comes at around $100 (or around £70/€80). Being a rather cheap recording microphone it doesn't cut too many corners.
The build quality is solid as the body of the AKG mic is solid metal with a nice modern finish, coming in black with a minimal and simple design. On the microphone body itself, you will also find the only two physical switches: one for low cutoff filter and one for -20dB.
At the bottom of the AKG Perception 120 microphone, you will find the XLR output and when it comes to the physical aspects of the microphone, that is pretty much it.
AKG has focused on what's important in an affordable self-recording microphone, and that is the audio quality.
The P120 self recording microphone is advertised to be an all-around recording microphone and it delivers. It can be used for a professional recording setting, podcasts, voiceover and anything you might need from an all-around microphone.
It might not be the best condenser microphone for any specific task in hand, but what it has going for it is the versatility it can deliver.
Being a cheap condenser microphone it shines in its ability to deliver clear audio that most entry-level to intermediate level users will be satisfied with.
Combined with a pop filter and some post-processing treatment it delivers a professional quality that no one would blink an eye to. But how so?
AKG achieves this by combining an impressive set of specifications.
The P120 has an audio frequency bandwidth of 20Hz to 20000Hz, the equivalent noise level of 19dB-A, the sensitivity of 24mV/Pa and signal noise of 75dB-A just to mention a few.
Also, coming at around 44 to 52 V voltage and a current of less than or equal to 3mA, the P120 is a microphone you can run on USB-based audio interfaces, not worrying about losing performance and minimising the amount of equipment needed for a clean and professional sounding recording.
This leads to a competent condenser microphone. To optimise the performance of the P120 the microphone placement and some sound dampening equipment can greatly aid in achieving the best audio quality.
As mentioned previously, the AKG P120 is marketed as an all-around microphone and when it comes to commercial recording, with the proper setup it can easily achieve usable recordings and when it comes to more technical types of recording, such as foley the added features of the microphone can greatly aid:
The -20 dB pre-attenuation pad and the 300Hz - 6dB/octave bass-cut filter can cut down on time and difficulty when it comes to capturing the essence of a sound and makes the process of designing that much easier.
The dimensions coming at around - length: 165mm, diameter 54mm and the net weight at around 455g makes the AKG P120 condenser microphone a nice fit for a travelling microphone, as the microphone, the required XLR cables and even an audio interface can easily fit in a backpack making it easy to travel from studio to studio if that's the workflow you prefer.
The AKG condenser mics are known for their quality and availability, as AKG produces both mid and high-end microphones, you can trust that the product quality will be up to par.
The AKG 120 stands at the start of the lineup, followed by 220 and 420 series, all under the Perception lineup.
So if you're in the market for microphone recording or looking for a decent condenser recording microphone for the right price, the AKG Perception P120 is a choice like no other, covering most basis with the correct condenser microphone placement, delivering quality that most user will need and will be satisfied by.
Overall, the P120 is a very forgiving microphone with an amazing build quality making it an amazing choice for anyone looking into getting an intermediate-level microphone or a sturdy option for a travel microphone that can still achieve professional-quality recordings as the metal build makes it durable and it should last for years.
We hope you enjoy this AKG P120 review. If you have any thoughts or suggestions, please leave them in the comment section below, like and subscribe.
#consordini #akg #microphone
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
![Trap Beat Mixing Tutorial [Extended Version]
This tutorial will teach you how to mix a trap beat and how to mix a rap beat!
This mixing tutorial will help you have the foundation that you need and which you can expand on to create your own mixes.
First thing you should remember when mixing trap music is that everyone got their start somewhere, No one started out as a master of mixing technology.
This audio mastering tutorial is poised to help you get your start so that some day you can be a master mixer and move with confidence.
To get the most out of this tutorial you should have at least a basic understanding of music production. This is a music engineering tutorial for beginners but you will need to know some of the basics to get the most out of this tutorial.
Mixing Technology.
Having the right mixing technology is a must when it comes to mixing rap music. Beat making is one part skill and one part the right technology.
No matter how skilled you are if you do not have the right sound engineering equipment you will not get the professional sound that you desire.
When you are in the recording studio you want to be able to focus on making trap beats not on faulty equipment or sub-par capabilities.
Presonus Studio One is the ticket for professional mixing and mastering.
It is a great DAW that gives you the tools that you need to really stoke that creativity and develop a great sound you feel good about.
The Studio One Mastering.
To get the most out of this tutorial it is strongly suggested that you get organized.
It takes a few extra minutes to do but frankly it is imperative that you are organized at the start to help you stay focused through out the Studio One practice session.
Now if you have a great deal of experience using a compressor bus, you may want to keep it engaged, but if you don’t, then just follow the steps above to get rid of it.
Next up, use the Session Markers, it is a great way to stay organized. Use the Sequencer Organizer, it may seem like a pain in the neck at first because it is a multi step process but in the end it is well-worth taking the time to do it.
Once you have the playlist organized, it is time to organize the mixer. I know this is taking away some of your time in the studio to color code and organize but in the end you will be glad that you did.
By investing time in getting organized you will save time in the future searching for your music.
Set Up Your Levels.
Okay so you have gotten a lot done now, but there is still a few more things to do before you start mixing. We are going to go over level settings because it is that important to your end sound.
The Secret Ingredient is Balance.
If you can get to the expert level when it comes to balancing you will get the professional sound that you want for your beat making and mixing.
We demonstrate how you can train your ear to hear where that sweet spot is located to help you get the balance just right and create one of a kind trap mixes that will highlight your talent.
The Mixing.
We go through the process of mixing and using different plugins to get different sounds and the entire process is explained including the why’s and how’s.
This video tutorial will give you the hands on experience that you need to create the signature trap mixes that you can be proud of.
What Next?
Stop what you are doing, watch the video, learn the tips and tricks that you need to and enjoy some studio time and try them out.
Leave your questions or comments in the section below! We would love to hear about your experience and a sample of your trap mix, share it here!
#consordini #mixing #trap #beats
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Trap Beat Mixing Tutorial [Extended Version]](https://i.ytimg.com/vi/Vu239R8cOHo/mqdefault.jpg)
![Valhalla Supermassive Review [All Features Revealed]
In this video, we will take a look at a wonderful free delay reverb from Valhalla, the Valhalla Supermassive!
Valhalla are known for their amazing delay, reverb, shimmer and many more great plugins. And Supermassive is one of their few free plugins, with the quality staying on the premium end.
But there is a catch, as Valhalla Supermassive presets are themed around celestial objects - and the results arent far off! The presets include Gemini, Hydra, Centaurus, Sagittarius, Andromeda, Lyra, Capricorn and Great Annihilator.
And that is a powerful sounding list. But what do these do? Well, Hydra, for example, is a decently fast attack reverb with shorter decay and low to high echo density, which you can control.
The Valhalla Supermassive reverb includes 8 presets in total, all of which are meant to inspire and bring some fun. The name says it all - Supermassive.
And that really is the point, of creating wonderful, massive space-odyssey like spaces with massive delays and reverb. Valhalla Supermassive plugin is made from the heart, it seems, from a company that has a history with great and wonderful products.
And like mentioned before, the quality is just a high as their paid products, for example, the plugin also allows for tempo synced delay, that goes as much as up to 2 seconds.
It offers delay modulation in multiphase, density control, which allows you to tap in pointillistic echoes, amazing lush revers, echo clusters and much much more and a cross-platform preset browser, which is a very similar list to their premium products.
And that is not to downplay their pay to use plugins but to highlight the quality of their free to use products. This Valhalla Supermassive delay is just as much of a reverb.
Once you boot up the Supermassive you will see a very similar GUI if you have used other Valhalla Room products. On the left-hand side, you will find the mix and width knobs, which like the rest of the knobs are very accurate and deep.
The two biggest knobs around the centre are the delay and warp dials, as it is a delay, with reverb like capabilities. The warp is an amazing feature, allowing you to create wonderful and eerie warping sounds.
Moving towards the right-hand side, youll see the feedback and density knobs, two modulation knobs for rate and depth and two EQ knobs for high and low frequencies.
Once again, this Valhalla supermassive vst is not meant to be your goto reverb or delay, but more so a creative tool to explore different sounds and spaces, create something ambient.
And let us be real, the Valhalla Supermassive price cant be beaten. Because its free.
Different use cases will lead to very interesting results because if you use it for a melody, it sounds somewhat like an arpeggiator, which might lead to fantasy-like effects, but if you drop this reverb vst onto a snare, you are now able to create powerful snare hits, rolls and transitions.
Utilising the delay and warp while recording or by modulating it, you are able to achieve some really interesting stuff. It opens many doors for creative, glitchy feeling raisers, down filters and anything you can think of and because it is free, its a tool worth trying.
For a different example, if you plug your guitar in and pass it through the Supermassive in a similar fashion as a pad, you get a very nice, distant and spacey reverb, that turns every chord into a droning, amazing sound, filling the space wonderfully.
Overall, it is a great expressive tool, that you might find to be a great delay/reverb or just a nice tool to play around with and design some nice sounds.
If you have a melody you have given up on, try putting the Supermassive on top of it and playing around, you might be surprised by what this little thing can do.
Did you enjoy our Valhalla Supermassive review? Will you introduce it into your creative workflow? Let us know!
If you have liked the video, make sure to leave a like and subscribe to our channel for more great audio software and hardware reviews and if you have any thoughts, questions or suggestions, feel free to leave them in the comment section below!
#consordini #audioplugin #valhalla #valhallasupermassvie
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Valhalla Supermassive Review [All Features Revealed]](https://i.ytimg.com/vi/WallsOwtbsk/mqdefault.jpg)

![Mixing Bass Guitar [Special Tutorial]
Hey there, and thanks so much for checking out our quick beginner tutorial video on how to start mixing great sounding bass guitar tracks!
Whether you’re mixing rock, country, blues, hiphop or any other style of music, this easy lesson is guaranteed to provide tips and tricks for getting your bass track to a great starting point.
This video is perfect for producers and mixing engineers of any level, from beginner to pro. We will be working in Presonus Studio One 4, and using plugins from Softube, including the revolutionary Softube Console 1 mixing plugin control surface.
Even if you’re not using Studio One or Softube Console 1, you can follow along with these simple steps in any DAW and using any plugins of your choice.
If you’re not familiar with the Console 1, you can check out our review of this game-changing piece of gear here: https://youtu.be/HyxRmUegj0A
And if you’d like to know more about this amazing DAW, we will soon have a full review of Studio One 4 as well as a beginner tutorial here on the channel, so be sure to subscribe.
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
Bass can be a very difficult intrument to sit just right in a mix. And since it’s so critically important to getting your track sounding polished and radio ready, you want to take your time and make sure that the mix sounds as tight as possible.
Great sounding bass can make or break any project, and getting it just right takes time, patience and practice. But in this tutorial, we break the process down into simple, easy steps to get your bass part sounding great.
As with any other topic in music mixing and production, everything comes down to personal taste. When considering using effects like chorus, modulation, phasing, flanging or anything else, it’s all up to your own creativity and preferences for tone.
But there are some critical fundamental steps to getting your bass track to sound clean and professional before you start adding on these types of mixing effects. In this video, we will show you how to use gating, EQ, compression and filtering to prep your bass to sit perfectly in you mix no matter what creative effects you plan to use.
Many less experienced mixing engineers will jump straight into using too many dramatic effects right off the bat without considering some simple steps that need to be taken in order to ensure the mix comes out balanced, clear and sounding pro.
In our fast and simple video tutorial, we show you how to achieve a great starting sound for your bass track every time, no matter what style of rock you’re working on.
If you’re not working with Studio One or Softube Console 1, that’s OK - these steps can be followed in any major DAW, including Pro Tools, Logic Pro X, Cubase, Nuendo, Reaper, Garage Band, Audacity, FL Studio, or Ableton.
You can use plugins from any manufacturer, including Waves, Slate Digital, McDSP, or anything else. The important thing is understanding the fundamentals of how to use EQ, compression, gating, and other basic audio tools to get your bass sounding great.
Whether you’re a beginner, intermediate or expert engineer or producer, this mixing lesson is guaranteed to get your mixes sounding more polished, consistent and professional, every time.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado. I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini. Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music. Thanks for watching!
#consordini #bassguitar #mixing
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Mixing Bass Guitar [Special Tutorial]](https://i.ytimg.com/vi/Wtms7yXq42k/mqdefault.jpg)
![TAL Vocoder Review [Professional Version]
Hey there, and thanks so much for checking out our full video review of the TAL Vocoder plugin.
You can get it here - https://www.pluginboutique.com/products/430/?a_aid=5e0ed9ae72504
This plugin is super cool and useful if you do any kind of modern vocal production or if you use old-school 80’s style big synth sounds. Best part? IT’S FREE!
There is no reason to not download it and try it out for yourself. The TAL Vocoder provides a ton of character to your tracks.
In this music tutorial video, we explore the TAL Vocoder and see what it can do and how you can use it to help you produce like a pro.
What are your opinions on the TAL Vocoder plugin? Do you have any tips on how to use it? Do you prefer a different vocoder plugin? Please feel free to post in the comments below. We’d love to hear your thoughts!
You should have no problem finding the TAL Vocoder plugin by searching in any of the VST (Virtual Studio Technology) libraries.
We also have tons of other great tutorials and gear reviews on our channel. Visit our channel page and subscribe to check them out!
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
First of all, what even IS a vocoder? A vocoder is, essentially, a VOice-enCODER. It a synthesizer that relies on sound wave inputs to process the sound rather than an oscillator that most traditional synthesizers use.
Traditionally used with vocals, anything that produces sound can be sent through a vocoder. Get creative! A famous modern example of a vocoder used in a song would be “Hide and Seek” by Imogean Heap.
The TAL Vocoder will have to be set up a bit differently than most plugins.
It needs both audio and MIDI tracks. The MIDI is required to alter the sound, so you will also need a separate MIDI controller. We have the original vocal track going from the DAW through the MIDI controller (where it gets converted).
Then we send it through the TAL Vocoder and back to the DAW as a second track on the same channel so we can sculpt the wave. As a beginner audio engineer, this can sound complicated, but it’s not, promise.
This is typical with most vocoder plugins. As long as everything is connected properly, you should have no issues.
The TAL Vocoder can help you add more dimension to your tracks. Crunchy, but lush, it sounds almost like back-up vocalists accompening the lead. It is an interesting approach to layering sounds.
The TAL Vocoder plugin interface has wave form adjustments to help you get the effect you want (pulse, saw, sub, and noise). There is also frequency band controls to fine tune the shape of the wave form.
It also has some great sounding presets built in for those who like to plug and play. It can be as simple or complicated as you want it to be.
If you are looking for a vocoder that is easy to set up, use, and produces great results check out the TAL Vocoder plugin. All for the cool cool price of free.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado.
I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
I’m also an educator with extensive content on guitar instructional site JamPlay as well as here on Consordini.
Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music.
Thanks for watching!
#consordini #tal #talvocoder
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ TAL Vocoder Review [Professional Version]](https://i.ytimg.com/vi/XO1GWuJWfKg/mqdefault.jpg)


![TAL-Chorus-LX Review [Tutorial + Demo]
In this video, well take a look at a very simple but effective plugin from TAL - the Chorus LX, a plugin version of the Chorus, from the Roland Juno.
To start off - Its Free! TAL are known for many of their great plugins. The best part? A bunch of their plugins are free and are great choices even in comparison to paid plugins. TAL has definitely carved a place for themselves in the industry and you dont even need to commit to a license to experience their greatness.
TAL is a small and wonderful company in Switzerland, that creates high-quality effects and instruments and keeps the price in check. Around two-thirds of their plugins library is free and available for you to download right now and the plugins that do have a price tag are more than reasonably priced, barely reaching $50.
TAL software has been widely adopted in the industry and is known for its authentic and high quality vintage sound. So if youre looking for an analogue sound in your digital production process, theres no better place to look.
So why should you check out this free chorus VST? Well, its very simple and effective. Setting one widens the sound as in a great imaging tool to widen the sound of your instruments and recording.
The second, and only other option on the plugin, is a more chorus like preset, which emulates the original Roland Juno chorus - but it doesnt end there, select both of those bad boys and youre creating wonderful vintage-sounding progressions and licks without the mess, as the TAL Chorus LX is not emulating the noise that the original synth produced, which might sound as a possible negative to some, it allows you the freedom to add the noise after the fact (unfortunately not with the TAL Chorus LX itself, but its definitely better than having to deal with the noise if you didnt want to).
And its pretty much it! The TAL Chorus is really just that simple. Its a simple chorus VST, that delivers one of the most iconic chorus effects youll hear in classic records and as mentioned its a free chorus VST, which you cant really complain about, even if the effect is not what you expected, its Free. Chorus software is widely varied in quality when it comes to what it delivers and we love this one. Is it the best free chorus VST? Well, its definitely lxfree.
While mentioning the Roland Juno, you cant miss that TAL TAL is also known for its VST version of the famous synth the Togu Audio Line TAL U NO LX. Which is a wonderful VST if youre looking for what the Roland Juno had to offer in the form of a VST.
Its a completely rewritten emulation of the Juno 60, zero feedback delay filters, controls carefully calibrated to make the synth the best replacement for the analogue classic - and whats even better - we have a video on it, so make sure to check it out!
If you want a free version, you can always take a look at the TAL-U-No-62, which is the free predecessor to TAL-U-No-LX. Its a polyphonic virtual analogue synth that used the Juno 60 as a reference for its oscillators and filters.
And its just the start to the impressive list of 6 paid and 11 free plugins you can find on the TAL website. Including such plugins as the TAL Filter 2, which we also made a video on, Tal Elek7ro, a free virtual analogue synth with oscillator hard sync and frequency modulation, TAL BassLine, a free virtual analogue bass synthesizer, TAL Dub (which we also made a video about), a free vintage style delay effect and much much more.
Do you know any other great free chorus plugins? Any other LX free plugins? Well, we think the Chorus LX is definitely the best chorus plugin for achieving the effect of the Roland Juno chorus settings.
Have something on your mind? Let us know! Make sure to leave a like, subscribe to the channel for more videos and leave any thoughts or questions you have down in the comment section below!
You can get it here - https://www.pluginboutique.com/product/2-Effects/11-Chorus/428-TAL-Chorus-LX/?a_aid=5e0ed9ae72504
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/
#consordini #tal #audioplugin TAL-Chorus-LX Review [Tutorial + Demo]](https://i.ytimg.com/vi/ZQ456UUkapA/mqdefault.jpg)

![Noiz-Lab LE Mastering Bundle Review [Professional Opinion]
In this video, we will take a look at a great free mastering plugin bundle from Home Studio Mastering, the Noiz-Lab LE Mastering Bundle.
The bundle includes five different plugins alongside a master program in mixing.
The five plugins go in-hand with the 5-step workflow. The five plugins are designed in a very specific way, to work with each other and the entire mixing process.
The five plugins include a monomizer, an equalizer, a compressor, a convolver and a limiter. These five make the full Noiz-Lab LE bundle.
The Noiz-Lab LE Mastering Bundle by Home Studio Mastering was released as an educational tool, to help people really tackle mastering. It is built as a one-hour mastering workshop, going over the listed plugins to teach the workflow and reason behind the plugins.
The workflow starts with the Monomizer and ends with the Limiter. Understanding the Monomizer helps home studio users to optimize the low end, which is one of the bigger struggles during home studio sessions.
Moving on to the Equalizer, the course covers the tonal balance of the mix, so it can actually transfer over to different audio systems with the least amount of variety and in general, keep the mix consistent and tight.
Following on to the midpoint and the third step of the course, you encounter the compressor, this makes the mix predictable and consistent, the dynamics are stable and nicely there for you to work the final steps with it.
The LE Noiz-Lab continues on with the Convolver, having a compressed and cleaned up the mix, we can finally start adjusting the tonal dynamics ourselves.
And once we have a nice and dynamically assorted mix, you get to move on to the Limiter, which is the final step in the mixing process. Using the limiter, you try to maximize the volume of the track and retain transients.
So going over the entire mix and what the plugins do once more, the Monomizer is there to remove DC offset and make the low-end stereo image tighter and cleaner.
The Equalizer optimizes the tonal balance and improves the stereo image. The Compressor allows you to further control the dynamics and add character to the mix.
The Convolver creates depth and further adds character to the mix.
The Limiter, as already mentioned, optimizes loudness and preservers the transients of the mix.
And this rounds up the basics of mixing and the overview of the five mixing tools included in the bundle.
The Free Noiz-Lab LE Mastering Bundle stands as an educational tool in educating and introducing new producers and engineers on how to mix and properly treat the final mix of their or their clients, friends songs.
It is a wonderful resource like nothing else in the market, coming in a very wonderful, free package, with plugins that do not disappoint.
These effect plugins are there for educational porpuses, but even putting that aside they stand as very effective and great looking plugins that will stand as a very wonderful stand-in before moving on to plugins that people will individually choose at their own time, but this is a very great start. J. D. Young has created a wonderful resource for beginners to break the taboos of the world of mixing and gracefully introducing growing talent into the world of music.
It being free, even if you have some knowledge about mixing, it is worth a refresher and trying out a nice set of plugins with a nice program alongside it.
This program is great and the plugins even better, this is not only a great program to dip your feet into mixing, it is also a great set freeware plugins that will do all of the work you need in a mixing setting and will be a great addition if you want to find some nice and minimalistic mixing plugins to work with.
Have you enjoyed our video on the Noiz-Lab LE Mastering Bundle? Are you interested in trying it out yourself? Let us know!
If you liked the video, please leave a like and subscribe to our channel for more great software and hardware reviews and if you have any thoughts, questions or suggestions, feel free to leave them in the comment section below.
#consordini #audioplugin #noizlab
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Noiz-Lab LE Mastering Bundle Review [Professional Opinion]](https://i.ytimg.com/vi/aDNEI8FVy5k/mqdefault.jpg)
![How to Record Vocals at Home - Full Tutorial [Special Edition]
This tutorial is going to share the basics of audio recording in the home studio.
Learning how to record vocals the right way will change how you lay down tracks and the level of success you reach. Vocal recording techniques are the backbone to how to process pop vocals.
Everything you do in the studio starts with the recording, getting vocal recording right is the foundation that helps you to produce like a pro.
This tutorial will cover vocal recording tips and tricks, the basics of sound recording, voices recording tips and tricks and more.
First Things First.
A lot of music engineers and producers are focused more on the mechanics of how to make vocals sound good after the fact, the reality is if you start out with great tracks from the beginning there will be less editing in the end and less to do in the studio. ‘
A great vocal recording will always need some tweaks and some attention, but it will need a lot less attention if it is done right from the beginning.
Your Primary Objective.
As a producer your primary objective is to let the singer shine. That means you must make things comfortable in the studio for the vocalist and spend some time explaining what is going to happen.
The more comfortable a singer is with the process the more their talent will shine.
Even when you hear things that just not pleasant, keep it moving. Remember you will be recording multiple tracks that you can pick apart after the fact.
Some suggestions here and there are welcome but if you get in the critical audiophile mode you are likely to mess up the entire session.
Dispelling the Myths.
There are a lot of myths about vocal recording but none bigger than there is perfect equipment to use for a vocal recording.
People tend to get stuck on a certain mic or other equipment and it really can cloud your judgement.
It can be tempting to use the same equipment over and over because you like the results that you got the last time. While it is true there are some instances when using the same equipment is going to give you like results it is not true all the time.
Be flexible in the equipment that you are using. Have a few different mics on hand. One vocalist may sound great on one mic but may sound terrible on another.
Don’t get bogged down in the equipment that you love, be flexible and have the tools on hand that are going to help the vocalist deliver the best they got.
Choose the mic that is going to enhance the talent. Some mics are dark while others are bright, know which is what and don’t be afraid to switch things out even mid recording if you do not like what you hear.
You cannot fix technique! You can fix a lot of things after the fact, but the singer must bring their own technique to the studio.
As a producer it is not your job to coach vocalists in a few sessions as a matter of fact it is impossible to get the job done. Vocal techniques are developed over years of practice.
Do This.
Don’t let your vocalist eat the mic. Some vocalists get so close to the mic that it is literally almost in their mouth. You may have to fight a little but be sure they step back a bit.
Smaller spaces produce better results, vocal booths are small for a reason. Keep your vocalist in a small space to get the best results.
If you do not have a dedicated space in your home studio for recording than build a baffle around the singer to “catch” the bounce. You can buy an acoustic deflection shield and use that but use something.
Use a shock mount on your mic to keep it from rumbling around or it will show through in your recording.
Use closed back headphones during the session and make sure the vocalists voice is being returned to their ears.
We share other tips and tricks through out this tutorial. Watch the video and leave your comments below!
#consordini #recording #vocal
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ How to Record Vocals at Home - Full Tutorial [Special Edition]](https://i.ytimg.com/vi/aF8LTLQTy0w/mqdefault.jpg)