Airsoft Shell-Ejecting Gas SPAS-12 @CatgutViolin
Airsoft Shell-Ejecting Gas SPAS-12  @CatgutViolin
Uploaded August 2012 | Updated November 2026, 4 days ago
As briefly stated in the video, this is the internal mechanism of a Maruzen M1100 fitted to the external body of a Tokyo Marui SPAS-12, using a KTW folding stock, rigged up to a Palmer's Pursuit airsoft regulator to draw power from an external CO2 tank, and using custom lifter and extractor pieces designed and machined by Schaap.

Just a few notes, in no particular order.

-As usual, everything goes wrong on video. In tests the particular jam that you see a couple of times in the video only usually occurred about once in ten shots or so. It is usable as it is currently, just not perfect.

-This is NOT the same ejection issue every M1100 faces eventually, which is caused by the extractor wearing down. The shells eject fine, the problem is that the bolt is getting stuck, because the shell door is worn and thus allowing the next shell in the tube to get too close, letting the one on the lifter scrape it and getting stuck.

-Yes, picking up all the shells is annoying and impractical. I have a shell catcher built for an M1100, which is too small since the SPAS is so chunky. I'm designing a replacement of my own.

-If you're not familiar with the Maruzen system, each shell holds up to 10 BBs and they are all fired at once. The gun seems to be working fine at 120-140PSI (green gas is usually 95-105PSI), giving a very nice spread easily able to hit a man-sized target at 150ft thanks to the fixed hop-up.

-I'd like to point out that these shells were empty and this is a dry fire test, in the interest of safety.

-The Maruzen M1100 is probably the most realistic airsoft gun I've ever handled. It's surprisingly loud, close to a .22, and the heavy bolt flying back and forth gives it some semblance of recoil. The shells are just a nice bonus. Definitely scores points for intimidation, I think.

-Contrary to Hollywood, the real SPAS-12 is in fact a semi-automatic shotgun, with a secondary pump-action mode specifically for cycling low-power rounds (like beanbags) for riot control. Movies just use the pump-action because it's tricky enough to get a real SPAS-12 to cycle reliably with live rounds, let alone blanks.

-Unlike the real SPAS-12, this gun has the pump always available instead of needing to hit a button to switch between pump and semi modes, and there is no way to disable the blowback and thus have actual pump-action. It also holds 7+1 shells, as opposed to the real gun's 8+1, does not have a working magazine cutoff, and does not require you to press a button on the side to unlock the lifter for loading. People love the SPAS-12 because it's a cool-looking gun, not because it's practical at all nor because it performs well, so my goal here was just to replicate the look of the SPAS and having the functionality similar is a nice bonus.

All comments are welcome. If you should find yourself under attack by time-traveling cyborgs or cloned velociraptors, give me a shout and I'll see what I can do.
Airsoft Shell-Ejecting Gas SPAS-12Airsoft Exoskeleton WIP #4 (Build Complete)Airsoft Shell-Ejecting Gas M1014 / Benelli M4 Live FireAirsoft XE-11 Venom (CA M132 Microgun) DemoRange Day- CAI PW87 (1887 clone), Baikal MP220, Savage Model 720Airsoft Martini-Henry Live FireAirsoft Shell-Ejecting Gas M1014 / Benelli M4Tactical Airsoft Arena (TAA) 10/09/15Range Day- Mosin-Nagant 91/30, M44, Marlin .30-30, Baikal SxS, Win. 1887How To Deal With Airsoft Super ZombiesViper Tech Airsoft Snow TestNeed 4 Speed - Canandaigua Drift
CatgutViolin |

Airsoft Shell-Ejecting Gas SPAS-12

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER