Uploaded July 2017 | Updated November 2026, 3 days ago
Okay, half the title's an empty promise since it's not semi-auto yet- in fact, it doesn't even fire since the firing pin isn't mounted yet. But it does cycle, successfully feeding from a top-mounted Saiga 12 magazine and ejecting through the bottom.
Since it's open-bolt, no additional trigger or hammer mechanism will be needed to make it shoot. A fixed firing pin will impact the shell's valve/primer at the end of the forward stroke. Once that's mounted, all further non-cosmetic work will be just to set up the gas system and valve disconnect (based on the design of a Maruzen M1100).
The electrical tape holding the receiver to the stock is strictly temporary.
Okay, half the title's an empty promise since it's not semi-auto yet- in fact, it doesn't even fire since the firing pin isn't mounted yet. But it does cycle, successfully feeding from a top-mounted Saiga 12 magazine and ejecting through the bottom.
Since it's open-bolt, no additional trigger or hammer mechanism will be needed to make it shoot. A fixed firing pin will impact the shell's valve/primer at the end of the forward stroke. Once that's mounted, all further non-cosmetic work will be just to set up the gas system and valve disconnect (based on the design of a Maruzen M1100).
The electrical tape holding the receiver to the stock is strictly temporary.










