Uploaded July 2018 | Updated September 2026, 26 minutes ago
This skill video will show you how to perform a daily operational check on an ARFF apparatus.
NOTE: This skill video provides general guidelines for inspections. Ensure the apparatus is in a proper location and all safety precautions are followed before beginning this skill. Always follow manufacturer’s recommendations and local SOP/Gs.
1. Proceed to daily operational check site.
2. Engage the pump.
3. Make sure all gauges and valves on the in-cab pump panel are in working order.
4. Operate turrets to flow water. Check all turret functions in accordance with manufacturers’ instructions.
a. Test roof/HRET and bumper turrets (if applicable) for proper operation and full range of motion.
b. Test to ensure that the length and pattern of discharge conform to the specifications in the operator’s manual.
5. Test windshield coolant system.
6. Deploy and operate handlines.
7. Reservice the vehicle. If water was used from the onboard water tank, refill the tank.
8. If required by local SOP/Gs, completely drain water from fire pump, discharges, and all booster lines to prevent unnecessary damage caused from water freezing in cold climate conditions.
9. Document the inspection and any maintenance actions and report any deficiencies per local policy.
a. List any damage, discrepancies, or missing items.
b. Report damage, discrepancies, or missing items to appropriate personnel.
This skill video will show you how to perform a daily operational check on an ARFF apparatus.
NOTE: This skill video provides general guidelines for inspections. Ensure the apparatus is in a proper location and all safety precautions are followed before beginning this skill. Always follow manufacturer’s recommendations and local SOP/Gs.
1. Proceed to daily operational check site.
2. Engage the pump.
3. Make sure all gauges and valves on the in-cab pump panel are in working order.
4. Operate turrets to flow water. Check all turret functions in accordance with manufacturers’ instructions.
a. Test roof/HRET and bumper turrets (if applicable) for proper operation and full range of motion.
b. Test to ensure that the length and pattern of discharge conform to the specifications in the operator’s manual.
5. Test windshield coolant system.
6. Deploy and operate handlines.
7. Reservice the vehicle. If water was used from the onboard water tank, refill the tank.
8. If required by local SOP/Gs, completely drain water from fire pump, discharges, and all booster lines to prevent unnecessary damage caused from water freezing in cold climate conditions.
9. Document the inspection and any maintenance actions and report any deficiencies per local policy.
a. List any damage, discrepancies, or missing items.
b. Report damage, discrepancies, or missing items to appropriate personnel.
