Uploaded January 2023 | Updated September 2026, 1 day ago
The other way to modify the airbox on a Honda CRF300L / Rally
LINKS:
Buy a shirt!: endless-money-pits.myspreadshop.com
Air box mod kit: crfsonly.com/catalog/product_info.php/products_id/7503
Deburring tool: amzn.to/3WK5wYI
Impact driver: amzn.to/3tC97vN
1 inch hole saw: amzn.to/3i9v0Qp
Hex wrench set: amzn.to/32U647P
Phillips #2 screwdriver: amzn.to/34wLzhH
Dikes: amzn.to/3GprWFV
Needle nose pliers: amzn.to/3L7jvCv
Small flathead screwdriver: amzn.to/3sbUm0L
Shop towels: amzn.to/3ftBozY
Gasket maker: amzn.to/3GoKENG
Razor blade tool: amzn.to/3L9raAo
Magnetic bowl: amzn.to/3HsWtnA
Lag screws: amzn.to/3GoXVIm
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: subscribestar.com/endless-money-pits
Support me on Patreon: patreon.com/EndlessMoneyPits
Check out my merch!: endless-money-pits.myspreadshop.com
Or make a one-time donation: paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Impact driver
• 1 inch hole saw
• 5mm hex bit
• 6mm hex bit
• Phillips #2 bit
• A pair of dikes
• Needle nose pliers
• Small flathead screwdriver
• Paper towels
• RTV sealant
• A razor blade
• A couple screws
• Magnetic bowl
• A scrap piece of wood
• Air box mod kit
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
The other way to modify the airbox on a Honda CRF300L / Rally
LINKS:
Buy a shirt!: endless-money-pits.myspreadshop.com
Air box mod kit: crfsonly.com/catalog/product_info.php/products_id/7503
Deburring tool: amzn.to/3WK5wYI
Impact driver: amzn.to/3tC97vN
1 inch hole saw: amzn.to/3i9v0Qp
Hex wrench set: amzn.to/32U647P
Phillips #2 screwdriver: amzn.to/34wLzhH
Dikes: amzn.to/3GprWFV
Needle nose pliers: amzn.to/3L7jvCv
Small flathead screwdriver: amzn.to/3sbUm0L
Shop towels: amzn.to/3ftBozY
Gasket maker: amzn.to/3GoKENG
Razor blade tool: amzn.to/3L9raAo
Magnetic bowl: amzn.to/3HsWtnA
Lag screws: amzn.to/3GoXVIm
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: subscribestar.com/endless-money-pits
Support me on Patreon: patreon.com/EndlessMoneyPits
Check out my merch!: endless-money-pits.myspreadshop.com
Or make a one-time donation: paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Impact driver
• 1 inch hole saw
• 5mm hex bit
• 6mm hex bit
• Phillips #2 bit
• A pair of dikes
• Needle nose pliers
• Small flathead screwdriver
• Paper towels
• RTV sealant
• A razor blade
• A couple screws
• Magnetic bowl
• A scrap piece of wood
• Air box mod kit
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
