Agentic Parasitic-Aware Design Closure with Calibre and Solido @SiemensSoftware
Agentic Parasitic-Aware Design Closure with Calibre and Solido  @SiemensSoftware
Uploaded October 2026 | Updated November 2026, 5 days ago
This video shows an autonomous workflow for parasitic-aware design closure using Calibre and Solido tools, automating a multi-step sequence — from critical net identification, parasitic extraction, and flagging crosstalk violations to waveform analysis and PVTMC simulation for signoff — ensuring robust design closure and the identification of worst-case corners through intelligent agent skills.

To kick off the workflow, the user asked:

"Identify critical nets on my design using Calibre Insight Analyzer, ensure the design is LVS clean using Calibre LVS, extract the parasitic effects of the critical nets using Calibre xACT, flag the crosstalk violations on Calibre DRV and report them, do a transient analysis using Solido SPICE, eventually plot the waveform of net OUT using Solido Waveform Analyzer, and execute Solido PVTMC Verifier to get worst-case corners."

Here's the workflow in action:
1. Use victim and aggressor checks to obtain critical nets
2. Perform LVS and floating gate checks on critical nets
3. Perform layout parasitic extraction
4. Identify parasitic violations like crosstalk
5. Run SPICE simulation for transient analysis
6. Identify the worst-case corners by running PVTMC simulations
7. Visualize parasitic violations in your design

▶️ Connect with us:
» LinkedIn: https://sie.ag/6Pq8iB
» EDA blogs: https://sie.ag/4TGEMF
» IC Design Community Discussion Board: https://sie.ag/5LAT82
» X: https://sie.ag/6bbqJy
#EDA #Semiconductor #ElectronicsEngineering
Agentic Parasitic-Aware Design Closure with Calibre and SolidoCharacteristics management for complex productsThree key takeaways from Realize LIVEOpcenter MES Semiconductor MapSuiteThe future of aerospace: Digital twins, AI & innovation at Farnborough Airshow 2026Building the Digital Foundation for the Next Generation of Manufacturing at Zimmer BiometStop building tech. Start building clarity.Can digital twin technology accelerate the path to commercial fusion? | CFS + Siemens + AWSWhats new in Simcenter 3D 2606 | Rotor Dynamics #WhatsNewSimcenterPlant Simulation Virtual User Group: Whats new in Plant Simulation 2606How can you turn technology experimentation into operational advantage?AI in PLM: How it enhances the user experience
Siemens Software |

Agentic Parasitic-Aware Design Closure with Calibre and Solido

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER