Uploaded June 2022 | Updated November 2026, 36 minutes ago
We developed a self-contained end-effector for layouting on construction sites with aerial robots! The end-effector achieves high accuracy through the use of multiple contact points, compliance, and actuation. Find out more about the system design in our paper: roboticsproceedings.org/rss18/p073.pdf
Contact:
Christian Lanegger: christian.lanegger@mavt.ethz.ch
Abstract:
Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel ``smart'' end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment.
In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.
We developed a self-contained end-effector for layouting on construction sites with aerial robots! The end-effector achieves high accuracy through the use of multiple contact points, compliance, and actuation. Find out more about the system design in our paper: roboticsproceedings.org/rss18/p073.pdf
Contact:
Christian Lanegger: christian.lanegger@mavt.ethz.ch
Abstract:
Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel ``smart'' end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment.
In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.






![[T-RO 2026] Allocation for Omnidirectional Aerial Robots: Incorporating Power Dynamics
This is the accompanying video of our T-RO 2026 paper Allocation for Omnidirectional Aerial Robots: Incorporating Power Dynamics.
Paper: https://arxiv.org/abs/2412.16107
Abstract:
Tilt-rotor aerial robots are more dynamic and versatile than fixed-rotor platforms, since the thrust vector and body orientation are decoupled. However, the coordination of servos and propellers (the allocation problem) is not trivial, especially accounting for overactuation and actuator dynamics. We incrementally build and present three novel allocation methods for tilt-rotor aerial robots, comparing them to state-of-the-art methods on a real system performing dynamic maneuvers. We extend the state-of-the-art geometric allocation into a differential allocation, which uses the platform’s redundancy and does not suffer from singularities. We expand it by incorporating actuator dynamics and propeller power dynamics. These allow us to model dynamic propeller acceleration limits, bringing two main advantages: balancing propeller speed without the need for nullspace goals and allowing the platform to selectively turn off propellers during flight, opening the door to new manipulation possibilities. We also use actuator dynamics and limits to normalize the allocation problem, making it easier to tune and allowing it to track 70% faster trajectories than a geometric allocation. [T-RO 2026] Allocation for Omnidirectional Aerial Robots: Incorporating Power Dynamics](https://i.ytimg.com/vi/ybT80MyB9_Y/mqdefault.jpg)

![[ICRA22] Collaborative Robot Mapping using Spectral Graph Analysis
ArXiv: https://arxiv.org/abs/2203.00308
Github: https://github.com/ethz-asl/fgsp
Contact: Lukas Bernreiter berlukas@ethz.ch
Abstract:
In this paper, we deal with the problem of creating globally consistent pose graphs in a centralized multi-robot SLAM framework.
For each robot to act autonomously, individual onboard pose estimates and maps are maintained, which are then communicated to a central server to build an optimized global map.
However, inconsistencies between onboard and server estimates can occur due to onboard odometry drift or failure.
Furthermore, robots do not benefit from the collaborative map if the server provides no feedback in a computationally tractable and bandwidth-efficient manner.
Motivated by this challenge, this paper proposes a novel collaborative mapping framework to enable accurate global mapping among robots and server.
In particular, structural differences between robot and server graphs are exploited at different spatial scales using graph spectral analysis to generate necessary constraints for the individual robot pose graphs.
The proposed approach is thoroughly analyzed and validated using several real-world multi-robot field deployments where we show improvements in the onboard system up to 90%. [ICRA22] Collaborative Robot Mapping using Spectral Graph Analysis](https://i.ytimg.com/vi/ykSa2_J0clw/mqdefault.jpg)

