Uploaded January 2020 | Updated November 2026, 15 hours ago
Building an AE2 controlled Obsidian production line with Thermal Expansion and Ender Tanks.
You can support me and the channel! Read more here: patreon.com/tkh
This video is something in between a tutorial video and a part in the Enigmatica series. I decided to make it a tutorial as it's quite generic and isn't really that important for the series because it's only a way to get material. Adding it to the playlist though!
By installing an augment to the Igneous Extruder you can remove the need for water and therefore get rid of one pipe. The augment you need is the Pyroclastic Injection:
teamcofh.com/docs/1.12/thermal-expansion/augment-pyroclastic-injection
Ender Tanks is only required if you need to take lava from some other place, you could use a portable tank or create Lava from Stone or Netherrack and just pipe it to the Igneous Extruder. So the transfer of Lava could be solved in many ways!
The Ender Tank responds to a redstone signal as mentioned, and it's of course possible to use the Level Emitter to just stop the tank from outputting Lava to the Extruder. I didn't think of it at the time of recording until I looked at the Redstone behavior later.
The Import Bus could be reduced by piping the Obsidian to some other place (another import place or Interface), but it depends on how your network looks.
This is a simple solution but works well and could be adapted to use other mods as well. The pump could of course be from some other mod as long as it can run on local power and gather lava in the same way. This pump will replace Lava with Cobblestone, which I guess is to reduce lag.
This entire Enigmatica 2 video series playlist here:
youtube.com/playlist?list=PLPCqiTnvx2GulZON0F-KViNkpCAuRrxJY
AE2 tutorial series here:
youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Read more about me and what I do here:
http://tkh.one/
Links to me on other places:
twitter.com/therealtkh
facebook.com/therealtkh
twitch.tv/therealtkh
Game details and key mods for this video:
Twitch Launcher
Enigmatica 2 version 1.70
Music:
None in this video.
Tags:
#thermal #applied #energistics
Building an AE2 controlled Obsidian production line with Thermal Expansion and Ender Tanks.
You can support me and the channel! Read more here: patreon.com/tkh
This video is something in between a tutorial video and a part in the Enigmatica series. I decided to make it a tutorial as it's quite generic and isn't really that important for the series because it's only a way to get material. Adding it to the playlist though!
By installing an augment to the Igneous Extruder you can remove the need for water and therefore get rid of one pipe. The augment you need is the Pyroclastic Injection:
teamcofh.com/docs/1.12/thermal-expansion/augment-pyroclastic-injection
Ender Tanks is only required if you need to take lava from some other place, you could use a portable tank or create Lava from Stone or Netherrack and just pipe it to the Igneous Extruder. So the transfer of Lava could be solved in many ways!
The Ender Tank responds to a redstone signal as mentioned, and it's of course possible to use the Level Emitter to just stop the tank from outputting Lava to the Extruder. I didn't think of it at the time of recording until I looked at the Redstone behavior later.
The Import Bus could be reduced by piping the Obsidian to some other place (another import place or Interface), but it depends on how your network looks.
This is a simple solution but works well and could be adapted to use other mods as well. The pump could of course be from some other mod as long as it can run on local power and gather lava in the same way. This pump will replace Lava with Cobblestone, which I guess is to reduce lag.
This entire Enigmatica 2 video series playlist here:
youtube.com/playlist?list=PLPCqiTnvx2GulZON0F-KViNkpCAuRrxJY
AE2 tutorial series here:
youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Read more about me and what I do here:
http://tkh.one/
Links to me on other places:
twitter.com/therealtkh
facebook.com/therealtkh
twitch.tv/therealtkh
Game details and key mods for this video:
Twitch Launcher
Enigmatica 2 version 1.70
Music:
None in this video.
Tags:
#thermal #applied #energistics
![Thermal Mods #24 - Fluxomagnet, Alchemical Quiver and Hypoinfuser - Innovation Tools Part 2/2
Going through the remaining tools from Thermal Innovation, read more below!
You can support me and the channel! Read more here: https://www.patreon.com/tkh
Three tools in one video, each useful in its own way! All have two function modes, each one unique for the tool. More details about each one below:
The Fluxomagnet requires RF to function, and I guess the most common use is to blacklist the common material and only pick up the rest automatically with the magnet. However, things you step on will of course be picked up regardless. There are other mods to solve that. The aim-attract function will work up to 64 blocks away, and the radius of pickup is equal to the tier you used (4-8 blocks). But this function would not be used as often if you put the magnet in a Baubles slot.
For the quiver, you can chose to simply use it as a quiver and store all arrows you need. But combining it with the function to tip arrows (into Tipped Arrows). I guess they are best combined with the harming, poison or negative debuff potions. Tipped arrows have shorter effect than normal potions though, 1/8th I think. You can enable or disable this function, and wear the quiver in any slot you like if you have Baubles installed. Right clicking will fill the quiver and you can empty it with a shift right click, I dont think I mentioned that part.
Finally, the hypoinfuser: use it with care! If you fill it with poision, make sure to only right click on targets so you dont shift right click it to inject the posion into yourself. Also, the auto-inject function should be turned off before you fill the infuser with negative or harmful potions, or you will directly be damaged with you put it into your inventory! Duration of negative effects is much lower and instant effects have less strength.
In the video I said that that infuser have limited use for some potions, such as healing or regeneration, as they are consumed continuously. But if you enter a fight in which you really want to stay alive I guess you can accept the waste as long as you plan for how long the fight will last. Injecting a potion consumes 250mB and the auto-inject has five uses (50mB each), do the math what is most worth it for you!
Read more about me and what I do here:
http://tkh.one/
All my Thermal Mods videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2GtCj0y1og3w0MFXxHCt9x7t
Key items and blocks in this video:
- Fluxomagnet
- Alchemical Quiver
- Hypoinfuser
- Fluid Transposer
- Enchant: Holding
Links to me on other places:
http://twitter.com/therealtkh
https://www.facebook.com/therealtkh
http://www.twitch.tv/therealtkh/
Game details and key mods for this video:
Twitch App
Minecraft 1.12.2
Forge 14.23.4.2739
Absolute Thermal 1.3 (Modpack)
Redstone Flux [1.12.2-2.0.2.3]
Thermal Cultivation [1.12.2-0.3.0.7]
Thermal Dynamics [1.12.2-2.5.1.14]
Thermal Expansion [1.12.2-5.5.0.29]
Thermal Foundation [1.12.2-2.5.0.19]
Thermal Innovation [1.12.2-0.3.0.7]
Read more about the Team CoFH mods here:
https://teamcofh.com/
Tags:
#minecraft #tutorial #modded Thermal Mods #24 - Fluxomagnet, Alchemical Quiver and Hypoinfuser - Innovation Tools Part 2/2](https://i.ytimg.com/vi/FHjAOpK5ZQI/mqdefault.jpg)

![Automated Potion Brewing with AE2 - Modded Minecraft Tutorial
Auto-crafting potions with AE2 is fun to set up and saves a lot of manual work!
You can support me and the channel! Read more here: https://www.patreon.com/tkh
Well, everything except for the Water Bottles, I dont think its possible to do with vanilla AE2 but if I find out I will make sure to tell you here and in a follow-up video. Its straight-forward with various other mods but as this is an AE2 video I left that part open.
Note that this build depends on existing infrastructure, storage, crafting CPUs and main controller. However, I wanted this video to only focus on the brewing setup. And I did it in a detailed approach with a demonstration build - as I get many requests to not only show an already existing build.
Read more about me and what I do here:
http://tkh.one/
All my Applied Energistics 2 videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Links to me on other places:
https://twitter.com/therealtkh
https://www.facebook.com/therealtkh
https://www.twitch.tv/therealtkh
Game details and key mods for this video:
CurseForge App
Minecraft [1.19.2]
Forge [43.1.55]
Applied Energistics 2 [12.8.6]
The One Probe [6.2.2]
Tags related to this video:
#ModdedMinecraft #MinecraftTutorials #AE2
Chapters:
00:00 Introduction
03:45 Detailed Demonstration
05:25 Building Instruction
08:59 Potion Patterns
17:00 Building It!
21:00 Final Demonstration Automated Potion Brewing with AE2 - Modded Minecraft Tutorial](https://i.ytimg.com/vi/GgPVgJmH9q4/mqdefault.jpg)
![Growing Certus Quartz in AE2 - Part 2 - Modded Minecraft 1.19.2
A follow-up video to Certus Quartz automation. More info below!
You can support me and the channel! Read more here: https://www.patreon.com/tkh
After I released the first video for this build I kept messing around with it, and after getting a few questions about the build I decided to make a part 2. Hopefully these two videos can give you all the information and inspiration required to make a build of your own :)
Part 1 of this build:
https://www.youtube.com/watch?v=8xBNwD4UVpw
How to move the Flawless block with Spatial Containment System? The procedure is identical to moving a mob spawner, check this video:
https://www.youtube.com/watch?v=0b-GBKG0ZbI
Read more about me and what I do here:
http://tkh.one/
All my Applied Energistics 2 videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Links to me on other places:
https://twitter.com/therealtkh
https://www.facebook.com/therealtkh
https://www.twitch.tv/therealtkh
Game details and key mods for this video:
CurseForge App
Minecraft [1.19.2]
Forge [43.1.55]
Applied Energistics 2 [12.8.6]
The One Probe [6.2.2]
Tags related to this video:
#ModdedMinecraft #MinecraftTutorials #AE2
Chapters:
00:00 Introduction
00:56 Water Auto-Crafting
03:45 Updated Certus Block Handling
05:52 First Demonstration
07:58 New: Dust Automation
10:40 Second Demonstration
12:48 Wrapping Up First Part
14:58 Flawless Block Build
18:10 Final Words Growing Certus Quartz in AE2 - Part 2 - Modded Minecraft 1.19.2](https://i.ytimg.com/vi/GkehoLeJf50/mqdefault.jpg)
![Pams HarvestCraft and Binnies Food Autocrafting with Applied Energistics 2
Auto-crafting food can be tricky, especially those with fluids. Read more below!
You can support me and the channel! Read more here: https://www.patreon.com/tkh
After getting this question a few times I decided to make a video on the subject. Only crafting items from food stuff is rather easy, but when combined with fluids such as water or milk you need one extra step to automate the process. But there are no perfect solutions, and different mods handle fluids in different ways!
AE2 supports fluids but not using fluids from storage in recipes. This mostly means that we use buckets in recipes and we need to fill those buckets outside of the ME system. Pams Harvestcraft are not using fluids in the recipes, but we need to make the fluid items from buckets with fluid.
Its easier to work with Binnies drinks, but it comes with a cost of complexity.
There might be other mods making food with liquids in other ways, feel free to come with requests!
Read more about me and what I do here:
http://tkh.one/
All my Applied Energistics 2 videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Links to me on other places:
https://twitter.com/therealtkh
https://www.facebook.com/therealtkh
https://www.twitch.tv/therealtkh
Game details and key mods for this video:
Twitch App
Minecraft 1.12.2
Forge 14.23.5.2854
Applied Energistics [rv6-stable-7]
Thermal Dynamics [2.5.6.1]
Thermal Foundation [2.6.7.1]
Pams HarvestCraft [1.12.2zg]
Binnies Mods [2.5.1.203]
Tags related to this video:
#pamsharvestcraft #ae2 #tutorial Pams HarvestCraft and Binnies Food Autocrafting with Applied Energistics 2](https://i.ytimg.com/vi/GoPXmunP20o/mqdefault.jpg)
![AE2 Controlled and Automated Thermal Treefarm Power Plant Tutorial
AE2 automated Thermal Expansion treefarm power plant, more info below!
You can support me and the channel! Read more here: https://www.patreon.com/tkh
This build is a follow-up from my previous Thermal video, if you havent seen it I kind of recommend to do it first. But if you know how the Phytogenic Insolator works and all steps related to that you should be prepared for this video.
The previous video can be found here:
https://www.youtube.com/watch?v=V-xB_HQyLDw
At around 20:52 I got confused because the system was not behaving as I expected. I kept that part with the text though, and after video was finished I got an explanation to the behavior: It is only possible to output 16 items into an itemduct, and the operation produces 18 (plus sapling, but thats a separate transfer). The machine can output everything into a chest for example, but doing it like in this build 2 will be left behind!
Once the machine fills up to 48 (which means completely full because 18 will not fit in next operation), the machine will output 16 again because its not busy, making space for 18 more and continue to loop in that region. The servo is therefore not required unless youre bothered by the extra wood in the output slot, nothing will be lost!
If you place 64 saplings and 64 fluxed phyto-gro in a machine the output slot will slowly fill up with 2 each time and then loop between 48 and 32 until all 64 are used up, and after that send out the remaining wood in chunks of 16 untill its empty. But it will not output those leftover during operation, but a servo can do that! I have seen that the first operation sometimes fails on outputting the first operation like in this video at 20:50 , where the first 18 was still in there for some reason, but next operation would output 16 and leave 2 (to get 20) behind.
Read more about me and what I do here:
http://tkh.one/
All my Thermal Mods videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2GtCj0y1og3w0MFXxHCt9x7t
All my Applied Energistics 2 videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2Gv3rd5fpVPpKtb2oH53eYYa
Links to me on other places:
https://twitter.com/therealtkh
https://www.facebook.com/therealtkh
https://www.twitch.tv/therealtkh
Game details and key mods for this video:
Twitch App
Minecraft 1.12.2
Forge 14.23.5.2854
Applied Energistics 2 [rv6-stable-7]
CoFH Core [1.12.2-4.6.6.1]
CoFH World [1.12.2-1.4.0.1]
Redstone Flux [1.12-2.1.1.1]
Thermal Foundation [1.12.2-2.6.7.1]
Thermal Expansion [1.12.2-5.5.7.1]
Thermal Dynamics [1.12.2-2.5.6.1]
Read more about the Team CoFH mods here:
https://teamcofh.com/
Tags related to this video:
#minecraft #ae2 #tutorial AE2 Controlled and Automated Thermal Treefarm Power Plant Tutorial](https://i.ytimg.com/vi/GtGOXfobLa8/mqdefault.jpg)

![Advanced Rocketry #8 - Microwave Transmitter / Receiver (Minecraft 1.12.2)
How to generate RF in space and send it down to a receiver.
You can support me and the channel! Read more here: https://www.patreon.com/tkh
All different machines and fuel generation consume a lot of power, but how can we generate some? Solar energy can be harvested in space and transmitted as microwaves to a solar panel / microwave receiver down on Earth or another planet.
I did some minor testing and different amounts of solar panels on the satellites will make them produce other amounts of RF. My few tests only made things worse but Ill update here if I find more results. Same thing with the receiver part, but I guess youll figure that part out when playing anyway.
Read more about me and what I do here:
http://tkh.one/
All my Advanced Rocketry videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2GuQts4fmPampFiATBUnNEz_
Key items and blocks in this video:
- Rockets!
- Satellite (Builder, Bay, and satellites of course)
- Microwave Transmitter
- Microwave Receiver
- Solar Panel
Links to me on other places:
http://twitter.com/therealtkh
https://www.facebook.com/therealtkh
http://www.twitch.tv/therealtkh/
Game details and key mods for this video:
Twitch App
Minecraft 1.12.2
Forge 14.23.3.2702
Advanced Rocketry [1.12.2-1.4.0-88]
JEI [1.12.2-4.11.0.202]
The One Probe [1.12-1.4.23]
Thermal Dynamics [1.12.2-2.5.1.14]
Thermal Expansion [1.12.2-5.5.0.29]
Thermal Foundation [1.12.2-2.5.0.19]
Tinkers Construct [1.12.2-2.10.1.87]
Read more about AR here:
https://minecraft.curseforge.com/projects/advanced-rocketry
and here:
http://arwiki.dmodoomsirius.me/AdvancedRocketry/ Advanced Rocketry #8 - Microwave Transmitter / Receiver (Minecraft 1.12.2)](https://i.ytimg.com/vi/HF2uGtd-8Rk/mqdefault.jpg)
![Thermal Mods #11 - Redstone Furnace, Augments & Creosote Oil
Introduction to the Thermal Machines with the Redstone Furnace.
You can support me and the channel! Read more here: https://www.patreon.com/tkh
There will be many videos to cover the machines, and I rather cover them in more detail with only one or two machines per video than just going through them all too briefly in one video.
Also, going through the basic machine functions (all tabs) will only be done in this video as most of the others look quite the same. Same thing with the different tiers and power usage. I wanted to showcase the power usage here but only to demonstrate the difference between tiers and augments. This is also a subject that we dont need to cover in detail again.
This means that covering the machines going forward will be faster, so I can perhaps cover two machines in the same video if I think they are similar. Or perhaps a video will be much shorter, maybe only five minutes.
Did you see the note about the frames with Rotten Flesh and Leather? I forgot to mention that the Redstone Furnace adds a recipe for 4x Rotten Flesh into one Leather. But using the Trivection Chamber cuts it down to only 2x Rotten Flesh!
Read more about me and what I do here:
http://tkh.one/
All my Thermal Mods videos can be found in this playlist:
https://www.youtube.com/playlist?list=PLPCqiTnvx2GtCj0y1og3w0MFXxHCt9x7t
Key items and blocks in this video:
- Redstone Furnace
- Upgrades and Conversion kits
- Basic, Hardened, Reinforced, Signalum and Resonant
- Auxiliary Reception Coil
- Trivection Chamber
- Flux Anodizers
- Pyrolytic Conversion
- Charcoal and Coal Coke
- Creosote Oil
Links to me on other places:
http://twitter.com/therealtkh
https://www.facebook.com/therealtkh
http://www.twitch.tv/therealtkh/
Game details and key mods for this video:
Twitch App
Minecraft 1.12.2
Forge 14.23.4.2739
Absolute Thermal 1.3 (Modpack)
Redstone Flux [1.12.2-2.0.2.3]
Thermal Cultivation [1.12.2-0.3.0.7]
Thermal Dynamics [1.12.2-2.5.1.14]
Thermal Expansion [1.12.2-5.5.0.29]
Thermal Foundation [1.12.2-2.5.0.19]
Thermal Innovation [1.12.2-0.3.0.7]
Read more about the Team CoFH mods here:
https://teamcofh.com/ Thermal Mods #11 - Redstone Furnace, Augments & Creosote Oil](https://i.ytimg.com/vi/IombTPgWses/mqdefault.jpg)

