Uploaded June 2019 | Updated September 2026, 1 hour ago
This is my entry for the 16th AE Modular Patch Challenge - Pulling the old switcheroo. This time I had to use all 3 channels of the 3VCSWITCH module and this may be my most complex patch to date!
Switch #1 - switches constantly between two voices and that goes into a delay with ample feedback for some melodic echoes. The first voice is one osc going through the Wasp filter which has its cutoff controlled by the SEQ16 - even though there is no pitch changes on the osc by just changing the cutoff on the filter you get a nice melody. Voice two is another osc going through the SV filter with resonance setting resonably high, but no quite self oscillating (except when switch #2 comes into play!)
Switch #2 - switches between two different settings coming from the 4ATT/Mix. I'm setting two channels to +5V and using the attenuators I can dial in the exact amount of cutoff for the SV filter .. when the switch changes I get some nice self oscillating pings now and then.
Switch #3 - this is taking one oscillator and putting it either through the Nyle filter BP or HP in addition to the LP which is always on. This voice is played by the Keystep and gets CV and Gate from MIDI.
Some bass beat is added from the mighty LOPAG module. All rythmic variations are coming through complex interplay from 2 LFOs, the new Multi Mode Divider module, LOGIC and TRIQ164 ... so there's heaps going on at different times.
More info about this patch challenge:
forum.aemodular.com/thread/313/patch-challenge-pulling-old-switcheroo
All sounds in this video are made with the AE Modular from tangible waves without any post processing! More info:
tangiblewaves.com
Please visit my website for more info, videos and soundcloud:
the5thvolt.com
AEModular #tangiblewaves #aechallenge
This is my entry for the 16th AE Modular Patch Challenge - Pulling the old switcheroo. This time I had to use all 3 channels of the 3VCSWITCH module and this may be my most complex patch to date!
Switch #1 - switches constantly between two voices and that goes into a delay with ample feedback for some melodic echoes. The first voice is one osc going through the Wasp filter which has its cutoff controlled by the SEQ16 - even though there is no pitch changes on the osc by just changing the cutoff on the filter you get a nice melody. Voice two is another osc going through the SV filter with resonance setting resonably high, but no quite self oscillating (except when switch #2 comes into play!)
Switch #2 - switches between two different settings coming from the 4ATT/Mix. I'm setting two channels to +5V and using the attenuators I can dial in the exact amount of cutoff for the SV filter .. when the switch changes I get some nice self oscillating pings now and then.
Switch #3 - this is taking one oscillator and putting it either through the Nyle filter BP or HP in addition to the LP which is always on. This voice is played by the Keystep and gets CV and Gate from MIDI.
Some bass beat is added from the mighty LOPAG module. All rythmic variations are coming through complex interplay from 2 LFOs, the new Multi Mode Divider module, LOGIC and TRIQ164 ... so there's heaps going on at different times.
More info about this patch challenge:
forum.aemodular.com/thread/313/patch-challenge-pulling-old-switcheroo
All sounds in this video are made with the AE Modular from tangible waves without any post processing! More info:
tangiblewaves.com
Please visit my website for more info, videos and soundcloud:
the5thvolt.com
AEModular #tangiblewaves #aechallenge
