Uploaded November 2020 | Updated September 2026, 2 weeks ago
In this video, Jarrett from Alarm Grid explains the advantages associated with PowerG Motion Detection Sensors. The PowerG lineup of products refers to a set of wireless sensors made by DSC. These wireless sensors are specifically designed for use with systems that support PowerG Sensors, such as the Qolsys IQ Panel 2 Plus, the DSC Iotega, and any DSC PowerSeries NEO with an added PowerG Transceiver. If you have a security system that supports PowerG Sensors, then there is a very good chance that you will be using PowerG Motion Sensors as well.
PowerG Sensors are known for being some of the best wireless sensors in the entire security industry. This is due to a few different factors. For one, these sensors offer some of the best range in the entire industry of wireless security sensors. On a Qolsys IQ Panel 2 Plus System, a PowerG Motion Sensor can communicate from up to 2,000 feet away from the panel. And when a PowerG Motion Sensor is used with a DSC PowerSeries NEO, the maximum open air distance increases to two kilometers! And these wireless communication ranges can be further increased by using a PowerG Wireless Repeater.
Another major benefit of PowerG Motion Sensors is that they offer some of the best wireless security and protection available. A PowerG Motion Sensor will communicate with its paired alarm panel using 128-bit AES encryption, making it virtually impossible to hack or takeover wirelessly. These sensors also use a technique called Frequency Hopping Spread Spectrum to prevent techniques of RF jamming. There is also a good selection of PowerG Motion Sensors to choose from. You can pick from the PG9914 with pet immunity, the PG9994 Outdoor Motion Detection Sensor, the PG9924 Curtain Motion Sensor, and the PG9902 Outdoor Curtain Motion Sensor. And the PG9984P offers dual-tech capabilities with both microwave and PIR sensing. All make great additions to a PowerG System.
alarmgrid.com/faq/should-i-get-a-powerg-motion
http://alrm.gd/get-monitored
In this video, Jarrett from Alarm Grid explains the advantages associated with PowerG Motion Detection Sensors. The PowerG lineup of products refers to a set of wireless sensors made by DSC. These wireless sensors are specifically designed for use with systems that support PowerG Sensors, such as the Qolsys IQ Panel 2 Plus, the DSC Iotega, and any DSC PowerSeries NEO with an added PowerG Transceiver. If you have a security system that supports PowerG Sensors, then there is a very good chance that you will be using PowerG Motion Sensors as well.
PowerG Sensors are known for being some of the best wireless sensors in the entire security industry. This is due to a few different factors. For one, these sensors offer some of the best range in the entire industry of wireless security sensors. On a Qolsys IQ Panel 2 Plus System, a PowerG Motion Sensor can communicate from up to 2,000 feet away from the panel. And when a PowerG Motion Sensor is used with a DSC PowerSeries NEO, the maximum open air distance increases to two kilometers! And these wireless communication ranges can be further increased by using a PowerG Wireless Repeater.
Another major benefit of PowerG Motion Sensors is that they offer some of the best wireless security and protection available. A PowerG Motion Sensor will communicate with its paired alarm panel using 128-bit AES encryption, making it virtually impossible to hack or takeover wirelessly. These sensors also use a technique called Frequency Hopping Spread Spectrum to prevent techniques of RF jamming. There is also a good selection of PowerG Motion Sensors to choose from. You can pick from the PG9914 with pet immunity, the PG9994 Outdoor Motion Detection Sensor, the PG9924 Curtain Motion Sensor, and the PG9902 Outdoor Curtain Motion Sensor. And the PG9984P offers dual-tech capabilities with both microwave and PIR sensing. All make great additions to a PowerG System.
alarmgrid.com/faq/should-i-get-a-powerg-motion
http://alrm.gd/get-monitored
