Uploaded July 2019 | Updated November 2026, 12 hours ago
In future, fuel designs may be based on advanced materials, have inhomogeneous structures, or have complex geometries. Some concepts cannot be fabricated via conventional processes applied to traditional UO2-based fuel.
Additive manufacturing of ThO2 has been investigated using a commercially available stereolithography-based 3D printer and photopolymer resin.
Manufacturing Steps:
1. 3D CAD model drawing and slicing
2. Parts printing (~3.5 h duration)
3. Printed part washing with isopropyl alcohol to remove any excess resin
4. UV light curing to complete the polymerization of resin
5. Support structure cutting off
6. Resin burnout (air, 400°C for 2h)
7. Sintering (air, 1700°C for 2h)
Conclusions:
• Additive manufacturing successfully applied to produce ThO2 part with complex geometries using a commercially available stereolithography-based 3D printer and photopolymer resin.
• Improvements need to be made to
• increase sintered density of the printed parts,
• decrease surface roughness,
• decrease number of internal cracks, and
• mitigate non-uniform distortion during sintering
• Additive manufacturing eliminates the geometric constraints of conventional fuel manufacturing which may enable fuel designers to define fuel geometries optimized for improved fuel performance and safety.
ThoriumRemix.com Thorium & MSR & Nuclear assets used in Thorium Remix project.
In future, fuel designs may be based on advanced materials, have inhomogeneous structures, or have complex geometries. Some concepts cannot be fabricated via conventional processes applied to traditional UO2-based fuel.
Additive manufacturing of ThO2 has been investigated using a commercially available stereolithography-based 3D printer and photopolymer resin.
Manufacturing Steps:
1. 3D CAD model drawing and slicing
2. Parts printing (~3.5 h duration)
3. Printed part washing with isopropyl alcohol to remove any excess resin
4. UV light curing to complete the polymerization of resin
5. Support structure cutting off
6. Resin burnout (air, 400°C for 2h)
7. Sintering (air, 1700°C for 2h)
Conclusions:
• Additive manufacturing successfully applied to produce ThO2 part with complex geometries using a commercially available stereolithography-based 3D printer and photopolymer resin.
• Improvements need to be made to
• increase sintered density of the printed parts,
• decrease surface roughness,
• decrease number of internal cracks, and
• mitigate non-uniform distortion during sintering
• Additive manufacturing eliminates the geometric constraints of conventional fuel manufacturing which may enable fuel designers to define fuel geometries optimized for improved fuel performance and safety.
ThoriumRemix.com Thorium & MSR & Nuclear assets used in Thorium Remix project.






![Yorktown Clean Energy Center - Dr. Ganapati Myneni @ TEAC10
Dr. Ganapati Myneni, Director, VT-India Nuclear Energy Partnership, BSCE Systems, Inc.
Yorktown, Virginia, USA.
Specifications of the one way coupled sub-critical micro-reactors...
CW Electron Linac:
- Energy 10 -15 MeV
- Current 1 to 3 A
- Frequency 915 MHz
- Thermionic gun
- Operating temperature 4.25 K
- Forged ingot Nb cavity with Nb3Sn inner surface
Sub-critical Core:
- Molten salt burner/breeder
- Breed and burn in equilibrium
- Thorium in the central breeding zone
- Natural or slightly enriched uranium in the outer zone
Applications:
- High temperature heat sources
- Medical isotope generators in parallel
- Water desalination plants
- Back up to renewable energy sources close to cities and townships
Delivered at TEAC10, Thorium Energy Alliance Conference #10 on Oct 1st, 2019 [2019-10-01]. http://thoriumenergyalliance.com/
http://ThoriumRemix.com/ Thorium & MSR & Nuclear assets used in Thorium Remix project. Yorktown Clean Energy Center - Dr. Ganapati Myneni @ TEAC10](https://i.ytimg.com/vi/TgnnRmMt6Ts/mqdefault.jpg)



