Uploaded May 2025 | Updated September 2026, 2 weeks ago
Episode#19 Big Budget Virtual Pinball Cabinet Tutorial Series!
In this episode, I show you how to install a brand spanking new gear motor inside your vpin using Arnoz's Walter board and MOS8 boards! These boards allow you to have PWM for your mechanical toys that allow you to adjust exactly how much noise/feeling you want! I also show how to install the new Direct Output Framework (DOF), it couldn't be any easier folks! As always, I also add all of the Way of the Wrench extras you guys have grown to love so you have a perfectly running vpin in the easiest format to understand! What more could you ask for???
Special thanks to L'atelier D'Arnoz for sponsoring this video!
Here are direct links to his awesome parts!
Walter board:
shop.arnoz.com/en/dude-s-cab/132-walter-driver-v1.html
MOS8 board:
shop.arnoz.com/en/dude-s-cab/63-copy-of-mos4.html
Think I'm doing a crazy good job and want to help fund my next cool project or help support the purchase of some new filming gear? Check out my Patreon where you can support the channel. patreon.com/WayoftheWrench
Pinball cabinet flat pack: pinballcabinet.com
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Wiper motor amzn.to/3YpJpsH
mini screwdriver set amzn.to/43ge4Mw
5x20 glass fuses amzn.to/3ESegZ5
USB Extension amzn.to/3HLPZT6
Fork Spade Terminals amzn.to/3jn7qQw
16 gauge wire amzn.to/3HrLITw
LG C3 42" monitor amzn.to/4g5DShC
Smart power strip smart power strip amzn.to/3YIPZvS
Wire management amzn.to/48qDI2c
32" Samsung monitor amzn.to/3A8MTI7
Terminal Blocks amzn.to/3Rq3Dig
Makita drill 1/2" amzn.to/3G7opl8
If you would like to make my budget build vpin cabinet, here is a link to the free plans! sdssautomotive.wordpress.com/way-of-the-wrench If you design your own, I'd love to see it! Send pics/video to my DM on Instagram!
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at instagram.com/way_of_the_wrench
If you enjoyed the video, learned some cool tech tips, I would appreciate it if you could share out the channel on your social media so I can help more people!
Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Music:
Retrograde by Jaxius
jaxiusmusic.com
Promoted by @RoyaltyFreePlanet
royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
Intro Outro music is Synthwave D https://www.youtube.com/watch?v=WNDvO... https://www.youtube.com/watch?v=RBxnY...
Disclaimer: These videos are intended for entertainment, inspiration, and educational use only. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines
Episode#19 Big Budget Virtual Pinball Cabinet Tutorial Series!
In this episode, I show you how to install a brand spanking new gear motor inside your vpin using Arnoz's Walter board and MOS8 boards! These boards allow you to have PWM for your mechanical toys that allow you to adjust exactly how much noise/feeling you want! I also show how to install the new Direct Output Framework (DOF), it couldn't be any easier folks! As always, I also add all of the Way of the Wrench extras you guys have grown to love so you have a perfectly running vpin in the easiest format to understand! What more could you ask for???
Special thanks to L'atelier D'Arnoz for sponsoring this video!
Here are direct links to his awesome parts!
Walter board:
shop.arnoz.com/en/dude-s-cab/132-walter-driver-v1.html
MOS8 board:
shop.arnoz.com/en/dude-s-cab/63-copy-of-mos4.html
Think I'm doing a crazy good job and want to help fund my next cool project or help support the purchase of some new filming gear? Check out my Patreon where you can support the channel. patreon.com/WayoftheWrench
Pinball cabinet flat pack: pinballcabinet.com
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Wiper motor amzn.to/3YpJpsH
mini screwdriver set amzn.to/43ge4Mw
5x20 glass fuses amzn.to/3ESegZ5
USB Extension amzn.to/3HLPZT6
Fork Spade Terminals amzn.to/3jn7qQw
16 gauge wire amzn.to/3HrLITw
LG C3 42" monitor amzn.to/4g5DShC
Smart power strip smart power strip amzn.to/3YIPZvS
Wire management amzn.to/48qDI2c
32" Samsung monitor amzn.to/3A8MTI7
Terminal Blocks amzn.to/3Rq3Dig
Makita drill 1/2" amzn.to/3G7opl8
If you would like to make my budget build vpin cabinet, here is a link to the free plans! sdssautomotive.wordpress.com/way-of-the-wrench If you design your own, I'd love to see it! Send pics/video to my DM on Instagram!
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at instagram.com/way_of_the_wrench
If you enjoyed the video, learned some cool tech tips, I would appreciate it if you could share out the channel on your social media so I can help more people!
Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Music:
Retrograde by Jaxius
jaxiusmusic.com
Promoted by @RoyaltyFreePlanet
royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
Intro Outro music is Synthwave D https://www.youtube.com/watch?v=WNDvO... https://www.youtube.com/watch?v=RBxnY...
Disclaimer: These videos are intended for entertainment, inspiration, and educational use only. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines
