Uploaded May 2024 | Updated November 2026, 1 day ago
Buy this Module from our Store - techiesms.com/product/ai-thinker-vc-02-kit-best-offline-voice-recognition-board
This is the VC-02 Kit from Ai-Thinker which supports upto 150 voice commands and we can customise those voice commands to any command we want and can also control the GPIO pins based on the voice commands. And the best part, this doesn't require any wifi, bluetooth or and Internet Connectivity.
This is a perfect board to add voice control to any of your existing or new projects. Enjoy this video and learn something new today..
You can support me๐๐ป and also get benefitted on Patreon :- patreon.com/techiesms
__________________________________________________________
๐จ๐ปโ๐ป Important Links ๐จ๐ปโ๐ป
Buy this Module from our Store - techiesms.com/product/ai-thinker-vc-02-kit-best-offline-voice-recognition-board
For Building Firmware, visit this site - voice.ai-thinker.com
Documentation page which contains Firmware Burning Tool - docs.ai-thinker.com/en/voice_module
__________________________________________________________
Buy the components for your projects and support techiesms๐ก๐
ESP32 Dev board - techiesms.com/product/esp32-development-board-doit-devkit-v1
Seeed Studio XIAO ESP32C3 - techiesms.com/product/seeed-studio-xiao-esp32c3
and many more such components are available at techiesms.com
__________________________________________________________
โฑ Time Stamps โฑ
00:00 Introduction
00:08 Some Project Demos using VC-02 Kit
01:07 Agenda of the Video
01:32 What Comes in VC-02 Kit?
02:02 Testing BuiltIn factory firmware
02:39 Building Custom Firmware with Custom Voice Commands
05:01 Choosing Custom WakeUp Command
07:01 Choosing Custom Voice Commands & Custom Replies
09:35 Adding GPIO Controls based on Voice Commands
11:03 Showing you the process of Sending Hex Data via UART
12:02 Choosing Voice Commands that works without WakeUP Command
12:58 Choosing Voice and itโs Configurations
13:38 Choosing boot broadcast
14:17 Choosing timeOut period for sleep and itโs reply
15:07 Choosing Voice Command for Quit (Going back to sleep)
15:36 Choosing Reply statement for Quit
16:02 Building SDK
16:30 Downloading Firmware File
16:47 Downloading Firmware Burning/Flashing Tool
16:58 Steps for Flashing Firmware in VC-02 Module
18:14 Testing Our Custom Firmware
19:51 Range Test
22:41 Conclusion
23:13 My Upcoming Project
23:25 Get this VC-02 kit only from techiems.com
__________________________________________________________
๐ฅ ๐ My Video Gear ๐๐ฅ
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- facebook.com/techiesms
Twitter :- twitter.com/imtechiesms
Instagram :- instagram.com/techiesms
Website :- techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share
Buy this Module from our Store - techiesms.com/product/ai-thinker-vc-02-kit-best-offline-voice-recognition-board
This is the VC-02 Kit from Ai-Thinker which supports upto 150 voice commands and we can customise those voice commands to any command we want and can also control the GPIO pins based on the voice commands. And the best part, this doesn't require any wifi, bluetooth or and Internet Connectivity.
This is a perfect board to add voice control to any of your existing or new projects. Enjoy this video and learn something new today..
You can support me๐๐ป and also get benefitted on Patreon :- patreon.com/techiesms
__________________________________________________________
๐จ๐ปโ๐ป Important Links ๐จ๐ปโ๐ป
Buy this Module from our Store - techiesms.com/product/ai-thinker-vc-02-kit-best-offline-voice-recognition-board
For Building Firmware, visit this site - voice.ai-thinker.com
Documentation page which contains Firmware Burning Tool - docs.ai-thinker.com/en/voice_module
__________________________________________________________
Buy the components for your projects and support techiesms๐ก๐
ESP32 Dev board - techiesms.com/product/esp32-development-board-doit-devkit-v1
Seeed Studio XIAO ESP32C3 - techiesms.com/product/seeed-studio-xiao-esp32c3
and many more such components are available at techiesms.com
__________________________________________________________
โฑ Time Stamps โฑ
00:00 Introduction
00:08 Some Project Demos using VC-02 Kit
01:07 Agenda of the Video
01:32 What Comes in VC-02 Kit?
02:02 Testing BuiltIn factory firmware
02:39 Building Custom Firmware with Custom Voice Commands
05:01 Choosing Custom WakeUp Command
07:01 Choosing Custom Voice Commands & Custom Replies
09:35 Adding GPIO Controls based on Voice Commands
11:03 Showing you the process of Sending Hex Data via UART
12:02 Choosing Voice Commands that works without WakeUP Command
12:58 Choosing Voice and itโs Configurations
13:38 Choosing boot broadcast
14:17 Choosing timeOut period for sleep and itโs reply
15:07 Choosing Voice Command for Quit (Going back to sleep)
15:36 Choosing Reply statement for Quit
16:02 Building SDK
16:30 Downloading Firmware File
16:47 Downloading Firmware Burning/Flashing Tool
16:58 Steps for Flashing Firmware in VC-02 Module
18:14 Testing Our Custom Firmware
19:51 Range Test
22:41 Conclusion
23:13 My Upcoming Project
23:25 Get this VC-02 kit only from techiems.com
__________________________________________________________
๐ฅ ๐ My Video Gear ๐๐ฅ
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- facebook.com/techiesms
Twitter :- twitter.com/imtechiesms
Instagram :- instagram.com/techiesms
Website :- techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share






![Print Tokens over Internet | IOT Thermal Printer using ESP32
In this video, I take you through the exciting world of Thermal Printers and ESP32! Youll learn how to seamlessly integrate a thermal printer with the ESP32 microcontroller to create innovative projects. I also dive into some common issues users face when working with thermal printers along with their solutions
To wrap up, I demonstrate an interesting project where I use the ESP32 and the thermal printer to print tokens over the internet. This project showcases how you can combine IoT technology with thermal printing to create practical and fun applications.
To try out free trial version of Altium, click here - https://www.altium365.com/yt/techiesms
Also Enroll for Altium Student Lab - https://www.altium.com/in/yt/techiesms
You can support me๐๐ป and also get benefitted on Patreon :- https://www.patreon.com/techiesms
๐จ๐ปโ๐ป Important Links ๐จ๐ปโ๐ป
Code for Token printer - https://github.com/techiesms/Token-Printer-using-ESP32
[Purchase Link] Thermal Printer - https://techiesms.com/product/ep24-thermal-printer-with-case/
Use Coupon Code TOKENPROJECT to get great discount on Thermal Printer (offer valid only till 8th Jan, 2025)
[Purchase Link] ESP32 Dev Board - https://techiesms.com/product/esp32-development-board-doit-devkit-v1/
[Purchase Link] 9V 2A Adapter - https://techiesms.com/product/9v-2a-power-adapter/
Buy the components for your projects and support techiesms๐ก๐
ESP32 Dev board - https://www.techiesms.com/product/esp32-development-board-doit-devkit-v1/
Seeed Studio XIAO ESP32C3 - https://www.techiesms.com/product/seeed-studio-xiao-esp32c3/
and many more such components are available at https://www.techiesms.com
โฑ Time Stamps โฑ
๐ฅ ๐ My Video Gear ๐๐ฅ
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (https://amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (https://amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (https://amzn.to/2I5cdDi)
Tripod - https://amzn.to/3uNhC4H
Microphone - Zoom H1N(https://amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( https://amzn.to/3vHcSyJ )
Get connected with techiesms everywhere..
Subscribe Main Channel :- http://bit.ly/techiesms_youtube
Subscribe Shorts Channel :- https://bit.ly/techiesms_shorts
Facebook :- http://www.facebook.com/techiesms
Twitter :- http://www.twitter.com/imtechiesms
Instagram :- https://www.instagram.com/techiesms/
Website :- http://www.techiesms.com
Telegram - @techiesms
techiesms
explore | learn | share Print Tokens over Internet | IOT Thermal Printer using ESP32](https://i.ytimg.com/vi/fhiuMejJpmE/mqdefault.jpg)



