realTFM | Adapt FutureOS ROM numbers for EPROM or emulator usage - English @realTFM | Uploaded September 2020 | Updated October 2024, 10 hours ago.
If you want to use FutureOS in EPROMs or with a CPC emulator then you have to adapt the ROM numbers. This video show how to do so.
Using the installation disc will allow you to alter the ROM select numbers of the four FutureOS ROMs.
ROM A need to have a number from 0 to 15. In case number 0 is selected it will autostart FutureOS when you switch the computer on.
The ROMs B, C and D can have any number between 1 and 255.
After you have adapted the numbers of the four ROMs you can either burn them to EPROM or use them with any CPC emulator.
The four files "FOSC-..." shall be used for the CPC6128, while the four files "FOSP-..." are suitable for the 6128 Plus.
Have success and fun!
If you want to use FutureOS in EPROMs or with a CPC emulator then you have to adapt the ROM numbers. This video show how to do so.
Using the installation disc will allow you to alter the ROM select numbers of the four FutureOS ROMs.
ROM A need to have a number from 0 to 15. In case number 0 is selected it will autostart FutureOS when you switch the computer on.
The ROMs B, C and D can have any number between 1 and 255.
After you have adapted the numbers of the four ROMs you can either burn them to EPROM or use them with any CPC emulator.
The four files "FOSC-..." shall be used for the CPC6128, while the four files "FOSP-..." are suitable for the 6128 Plus.
Have success and fun!