Uploaded June 2025 | Updated September 2026, 2 weeks ago
Episode 8 in our series. See the full acoustic testing results in Room EQ Wizard from each layer of treatment.
➤ ➤ ➤ Watch the Next Episode: youtu.be/nL9inI8M2a4
✅ Work with Me (Studio Design, Mixing, Mastering, Brand Partnerships): warpacademy.com
✅ This is a Series - Watch More Here: youtube.com/playlist?list=PLsyXZjufQdPzWqlRg2TtGWQ529z5noERs
DIY Acoustic Ceiling Cloud STEP-BY-STEP BUILD - Ep7: youtu.be/-Lk8xoSHF7g
Pro DIY Acoustic Treatment STUDIO BUILD & INSTALL - Ep6: youtu.be/j1mO5p0W384
Acoustic Treatment: The Strategy for Small Studios - Ep4: youtu.be/mxFPKJeu5dk
Room EQ Wizard: Start to Finish Tutorial - Ep 3: youtu.be/F-T_lZ3KJjU
Acoustic Testing Best Practices: Mic & Speaker Setup Video - Ep 2: youtu.be/dmz-vmb2UQI
Introduction to Room Acoustics Video: youtu.be/akFeOhC5HMM
Download the Free Acoustic Testing Guide & Checklist PDF: warpacademy.lpages.co/acoustic-testing-guide-landing-page
In this episode I walk you through the incremental improvement that each layer of acoustic treatment modules made in this home studio transformation. The rear wall modules, the side wall modules, the front corner bass traps, and the ceiling cloud are all analyzed. We go over the All SPL and phase / frequency response graph, the Impulse / ETC graph, the Filtered IR Graph to see decay times by frequency, the Waterfall graph, and the Spectrogram graph.
It’s a full step by step analysis of detailed acoustic testing from REW. You can use the same process to test and evaluate your home studio as you build DIY sound panels.
00:00 Room EQ Wizard Acoustic Testing Results
00:30 Incremental Acoustic Treatment Measurements
00:59 Bare Room Frequency Response Baseline
01:27 Rear Wall Bass Traps and Room Mode Smoothing
02:32 Sidewall Acoustic Treatment Results
03:07 Front Corner Bass Trap Results
03:44 Ceiling Cloud Acoustic Measurement Results
04:19 Smoothing Settings: VAR and Psychoacoustic
05:26 Final Frequency Response After Treatment
06:27 Why Speakers Against the Wall Lift the Low End
07:50 Bass Detail Measurements Below 300 Hz
10:03 ETC and Early Reflection Control
13:40 Why RT60 Is Misleading in Small Rooms
15:54 Filtered Impulse Response for Decay Time
17:10 Waterfall Graph Analysis
21:24 Spectrogram Analysis
23:48 Why You Should Measure Every Treatment Step
24:44 Next Step: Sonarworks SoundID Reference
Episode 8 in our series. See the full acoustic testing results in Room EQ Wizard from each layer of treatment.
➤ ➤ ➤ Watch the Next Episode: youtu.be/nL9inI8M2a4
✅ Work with Me (Studio Design, Mixing, Mastering, Brand Partnerships): warpacademy.com
✅ This is a Series - Watch More Here: youtube.com/playlist?list=PLsyXZjufQdPzWqlRg2TtGWQ529z5noERs
DIY Acoustic Ceiling Cloud STEP-BY-STEP BUILD - Ep7: youtu.be/-Lk8xoSHF7g
Pro DIY Acoustic Treatment STUDIO BUILD & INSTALL - Ep6: youtu.be/j1mO5p0W384
Acoustic Treatment: The Strategy for Small Studios - Ep4: youtu.be/mxFPKJeu5dk
Room EQ Wizard: Start to Finish Tutorial - Ep 3: youtu.be/F-T_lZ3KJjU
Acoustic Testing Best Practices: Mic & Speaker Setup Video - Ep 2: youtu.be/dmz-vmb2UQI
Introduction to Room Acoustics Video: youtu.be/akFeOhC5HMM
Download the Free Acoustic Testing Guide & Checklist PDF: warpacademy.lpages.co/acoustic-testing-guide-landing-page
In this episode I walk you through the incremental improvement that each layer of acoustic treatment modules made in this home studio transformation. The rear wall modules, the side wall modules, the front corner bass traps, and the ceiling cloud are all analyzed. We go over the All SPL and phase / frequency response graph, the Impulse / ETC graph, the Filtered IR Graph to see decay times by frequency, the Waterfall graph, and the Spectrogram graph.
It’s a full step by step analysis of detailed acoustic testing from REW. You can use the same process to test and evaluate your home studio as you build DIY sound panels.
00:00 Room EQ Wizard Acoustic Testing Results
00:30 Incremental Acoustic Treatment Measurements
00:59 Bare Room Frequency Response Baseline
01:27 Rear Wall Bass Traps and Room Mode Smoothing
02:32 Sidewall Acoustic Treatment Results
03:07 Front Corner Bass Trap Results
03:44 Ceiling Cloud Acoustic Measurement Results
04:19 Smoothing Settings: VAR and Psychoacoustic
05:26 Final Frequency Response After Treatment
06:27 Why Speakers Against the Wall Lift the Low End
07:50 Bass Detail Measurements Below 300 Hz
10:03 ETC and Early Reflection Control
13:40 Why RT60 Is Misleading in Small Rooms
15:54 Filtered Impulse Response for Decay Time
17:10 Waterfall Graph Analysis
21:24 Spectrogram Analysis
23:48 Why You Should Measure Every Treatment Step
24:44 Next Step: Sonarworks SoundID Reference




![How to Use Delay in Your Sound Design [FabFilter Timeless 2 Tutorial]
✅ Try All our Courses for FREE: https://warpacademy.com/free-trial-2
Get FabFilter Timeless 2: http://bit.ly/timeless2YT2Shop
Skip to somthin’:
0:00 Intro
0:56 Tour of the plugin GUI
3:13 Modulation sources
4:10 Adding width, saturation & chorus to bass with stereo delay
6:42 Adding delay to a lead vocal
8:33 Creating riser FX with delay
9:46 Glitching up a drum loop with Timeless 2
11:30 Review & outro
In this tutorial video, Merlyn demos how to use delay in your sound design with FabFilter’s AMAZING Timeless 2 delay plugin. You’ll see how advanced delay can add a lot of character, width and special effects to your sounds.
Timeless does many things that you wouldn’t normally expect a delay to do. If you want to see how to push a delay to its limits, join us and tune in for this one!
You’ll learn how to:
-Widen a bass by adding a stereo chorus effect with delay
-Add analog warmth using the filters
-Create ambient space around a lead vocal
-Make a riser effect with modulation
-Glitch up some drums
#fabfiltertimeless #delaytutorial #sounddesign How to Use Delay in Your Sound Design [FabFilter Timeless 2 Tutorial]](https://i.ytimg.com/vi/jBAFLzMav1c/mqdefault.jpg)





