Uploaded December 2025 | Updated November 2026, 3 hours ago
Day 9: A moderately fast TIA for PD amplification built using a discrete BJT folded cascode topology. The supply voltage is 3.3 volts and it has 10K of transimpedance, a BPW34 will require about 500 fF to 1 pF of compensation capacitance for best flatness given a reverse bias from the 3.3 volt supply. Higher transimpedances are possible with resulting loss of bandwidth, and vice versa. It is DC coupled and inverting, a lot of DC light will saturate it, you can AC couple it to avoid this or add a DC servo that rolls of the response to zero at DC. Add additional gain stages after some high-pass to easily detect high frequency modulated light while rejecting ambient.
Day 9: A moderately fast TIA for PD amplification built using a discrete BJT folded cascode topology. The supply voltage is 3.3 volts and it has 10K of transimpedance, a BPW34 will require about 500 fF to 1 pF of compensation capacitance for best flatness given a reverse bias from the 3.3 volt supply. Higher transimpedances are possible with resulting loss of bandwidth, and vice versa. It is DC coupled and inverting, a lot of DC light will saturate it, you can AC couple it to avoid this or add a DC servo that rolls of the response to zero at DC. Add additional gain stages after some high-pass to easily detect high frequency modulated light while rejecting ambient.










