Uploaded February 2021 | Updated November 2026, 2 days ago
The Ableton Live 11 beta with a modular synthesizer. The piano is from NI's Kontakt, the synth voices are an Instruo Ts-L and Steady State Fate ZPO, and bass is from a second Ts-L. Percussion is from an SSF BDS and a Bitbox Micro. The piano is processed by a Make Noise Morphagene, and all effects are from Ableton. See the time index below:
00:15 - a view of the new piano roll editor on a MIDI track, triggering a piano in NI's Kontakt. The new editor adds probability of a note being triggered, along with variations to the velocity of that note. The three MIDI clips for the piano have Follow Actions enabled to allow a random clip to be selected once the current clip finishes.
00:40 - the piano has been running through a Make Noise Morphagene in "broken echo" mode, and the mix knob is now being adjusted to hear just the output of the Morphagene.
00:53 - a second MIDI clip is launched, triggering a synth voice from an Instruo Ts-L, controlled by the CV Instrument from Ableton's CV Tools via an Expert Sleepers ES-9 audio interface. See the link below for a CV Tools demo and explanation, including calibrating a synth voice.
01:08 - a sequence is started on a NerdSEQ, triggering percussion, bass, and a second synth voice.
01:19 - a view of the plugins responsible for Ableton's erratic clock, consisting of a CV LFO acting as the clock source for the CV Clock In, and a second CV LFO modulating the rate of the LFO acting as the clock. An explanation of this method is also included in the CV Tools demo video, linked below.
01:51 - a view of the bass channel, where a lowpass filter is being modulated by a CV LFO, with its rate modulated by the stepped-random output of an additional CV LFO. The third LFO is assigned to the filter's resonance.
02:16 - a view of the synth voice triggered by the NerdSEQ, coming from a Steady State Fate ZPO. The new Spectral Time delay in Ableton 11 is being modulated by two CV LFOs assigned to the Spray and Tilt parameters.
02:32 - a view of the piano channel, where the output from the Morphagene processing the piano is running through a lowpass filter, and the new Hybrid Reverb from Ableton 11.
03:16 - additional views of the MIDI clips triggering the piano. The output of Kontakt, loaded with "The Maverick" piano library, is feeding the Make Noise Morphagene in "broken echo" mode. Velocity probability can be assigned a minimum and maximum value, seen in the second lane labeled "velocity".
03:53 - a view of the delay processing the percussion coming from a Bitbox Micro, modulated by two separate CV LFOs in stepped-random mode.
04:34 - one last view of the LFOs responsible for Ableton's erratic clocking.
Feel free to ask questions in the comments!
Part 2: youtu.be/JroFdDP4icU
CV Tools demonstration: youtu.be/i7SYiVM48XI
Facebook facebook.com/rheynemusic
Instagram instagram.com/rheynemusic
Bandcamp rheyne.bandcamp.com
SoundCloud soundcloud.com/rheyne
Twitter twitter.com/rheynemusic
#Ableton #Live11 #CVTools
The Ableton Live 11 beta with a modular synthesizer. The piano is from NI's Kontakt, the synth voices are an Instruo Ts-L and Steady State Fate ZPO, and bass is from a second Ts-L. Percussion is from an SSF BDS and a Bitbox Micro. The piano is processed by a Make Noise Morphagene, and all effects are from Ableton. See the time index below:
00:15 - a view of the new piano roll editor on a MIDI track, triggering a piano in NI's Kontakt. The new editor adds probability of a note being triggered, along with variations to the velocity of that note. The three MIDI clips for the piano have Follow Actions enabled to allow a random clip to be selected once the current clip finishes.
00:40 - the piano has been running through a Make Noise Morphagene in "broken echo" mode, and the mix knob is now being adjusted to hear just the output of the Morphagene.
00:53 - a second MIDI clip is launched, triggering a synth voice from an Instruo Ts-L, controlled by the CV Instrument from Ableton's CV Tools via an Expert Sleepers ES-9 audio interface. See the link below for a CV Tools demo and explanation, including calibrating a synth voice.
01:08 - a sequence is started on a NerdSEQ, triggering percussion, bass, and a second synth voice.
01:19 - a view of the plugins responsible for Ableton's erratic clock, consisting of a CV LFO acting as the clock source for the CV Clock In, and a second CV LFO modulating the rate of the LFO acting as the clock. An explanation of this method is also included in the CV Tools demo video, linked below.
01:51 - a view of the bass channel, where a lowpass filter is being modulated by a CV LFO, with its rate modulated by the stepped-random output of an additional CV LFO. The third LFO is assigned to the filter's resonance.
02:16 - a view of the synth voice triggered by the NerdSEQ, coming from a Steady State Fate ZPO. The new Spectral Time delay in Ableton 11 is being modulated by two CV LFOs assigned to the Spray and Tilt parameters.
02:32 - a view of the piano channel, where the output from the Morphagene processing the piano is running through a lowpass filter, and the new Hybrid Reverb from Ableton 11.
03:16 - additional views of the MIDI clips triggering the piano. The output of Kontakt, loaded with "The Maverick" piano library, is feeding the Make Noise Morphagene in "broken echo" mode. Velocity probability can be assigned a minimum and maximum value, seen in the second lane labeled "velocity".
03:53 - a view of the delay processing the percussion coming from a Bitbox Micro, modulated by two separate CV LFOs in stepped-random mode.
04:34 - one last view of the LFOs responsible for Ableton's erratic clocking.
Feel free to ask questions in the comments!
Part 2: youtu.be/JroFdDP4icU
CV Tools demonstration: youtu.be/i7SYiVM48XI
Facebook facebook.com/rheynemusic
Instagram instagram.com/rheynemusic
Bandcamp rheyne.bandcamp.com
SoundCloud soundcloud.com/rheyne
Twitter twitter.com/rheynemusic
#Ableton #Live11 #CVTools










